ആമുഖം
This manual provides essential instructions for the operation and care of your Marathon 34mm General Purpose Mechanical (GPM) Wrist Watch, model WW194003. This timepiece is designed for reliability and durability, featuring a dual-winding mechanical movement and tritium illumination.
ചിത്രം 1: ഫ്രണ്ട് view of the Marathon 34mm General Purpose Mechanical (GPM) Wrist Watch, model WW194003. The watch features a black dial with white numerals, tritium gas tube illumination, and a stainless steel case with a black nylon strap.
സജ്ജീകരണം: സമയം ക്രമീകരിക്കൽ
To ensure accurate timekeeping, follow these steps to set your watch:
- കിരീടം വലിക്കുക: Gently pull the crown (the knob on the side of the watch) out to its farthest position. This is typically the second click when pulling the crown.
- സമയം സജ്ജമാക്കുക: Rotate the crown either clockwise or counter-clockwise until the hour and minute hands indicate the correct time.
- കിരീടം പിന്നിലേക്ക് തള്ളുക: Once the time is set, push the crown firmly back into its original, closed position. This ensures water resistance and starts the watch movement.
ചിത്രം 2: വശം view of the Marathon GPM watch, highlighting the crown used for setting the time and winding the movement.
Operating the Mechanical Movement
Your Marathon GPM watch features a dual-winding mechanical movement (ETA 2801) that can be powered in two ways:
- മാനുവൽ വൈൻഡിംഗ്: To manually wind the watch, rotate the crown clockwise while it is in the closed position. This is recommended if the watch has stopped or has not been worn for an extended period. A fully wound watch will run for approximately 41 hours.
- ഓട്ടോമാറ്റിക് സെൽഫ്-വൈൻഡിംഗ്: The watch also features an automatic self-winding rotor. Normal wrist movement throughout the day will cause the rotor to oscillate, transferring energy to the mainspring and keeping the watch wound. You may notice a slight mechanical noise or feel the rotor oscillating, which is normal and indicates the automatic winding system is functioning.
For optimal performance, wear the watch regularly or manually wind it if it has been inactive.
ചിത്രം 3: ക്ലോസ് അപ്പ് view of the Marathon GPM watch dial, showing the clear numerals and hands, which are illuminated by tritium gas tubes for visibility in low light.
പരിപാലനവും പരിചരണവും
Proper care will extend the life and maintain the performance of your Marathon GPM watch:
- വൃത്തിയാക്കൽ: വാച്ച് കേസും ക്രിസ്റ്റലും ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് തുടയ്ക്കുക.amp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- ജല പ്രതിരോധം: The watch has improved water resistance. Ensure the crown is fully pushed in before exposing the watch to water. Avoid operating the crown while the watch is wet or submerged.
- താപനില തീവ്രത: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes, as this can affect the movement's accuracy and seals.
- കാന്തിക മണ്ഡലങ്ങൾ: Keep the watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices), which can magnetize the movement and affect accuracy.
- ക്രിസ്റ്റൽ: The watch features a scratch-resistant sapphire crystal. While highly durable, it is not entirely impervious to damage. Avoid direct impacts.
- Tritium Illumination: The tritium gas tubes provide constant illumination without external charging. Their brightness will gradually diminish over many years. This is a natural process and not a defect.
- സേവനം: Mechanical watches benefit from periodic servicing by a qualified watchmaker, typically every 3-5 years, to ensure optimal performance and longevity.
ചിത്രം 4: The Marathon GPM watch displaying its tritium gas tube illumination, providing constant visibility in low-light conditions.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your watch, consider the following:
- വാച്ച് പ്രവർത്തിക്കുന്നില്ല:
- Ensure the watch is sufficiently wound. Manually wind the watch by rotating the crown clockwise for 30-40 turns.
- If the watch has been inactive, it may take a few seconds of movement or manual winding for the second hand to start moving.
- കൃത്യമല്ലാത്ത സമയസൂചന:
- Check if the watch is fully wound. An under-wound mechanical watch can lose accuracy.
- Avoid strong magnetic fields, which can affect the movement. If suspected, a watchmaker can demagnetize the watch.
- Extreme temperature fluctuations can temporarily affect accuracy.
- ക്രിസ്റ്റലിനു കീഴിലുള്ള ഘനീഭവിക്കൽ:
- If condensation appears, it may indicate a breach in water resistance. Have the watch inspected by a qualified watchmaker immediately to prevent internal damage.
For issues not resolved by these steps, contact Marathon customer support or a certified watch repair center.
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | WW194003SS-NGM |
| പ്രസ്ഥാനം | ETA 2801 (Mechanical, Dual Winding) |
| ആഭരണങ്ങൾ | 17 |
| ക്രിസ്റ്റൽ മെറ്റീരിയൽ | നീലക്കല്ല് |
| തിളങ്ങുന്ന സവിശേഷതകൾ | Tritium Gas Tubes and MaraGlo |
| കേസ് മെറ്റീരിയൽ | 316L സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ |
| ക്ലാസ്പ് തരം | ബക്കിൾ |
| പവർ റിസർവ് | Approximately 41 hours (when fully wound) |
| ജല പ്രതിരോധം | Improved (specific depth not provided, refer to product packaging for details) |
ചിത്രം 5: The Marathon GPM watch positioned on a rock in an outdoor environment, showcasing അതിന്റെ കരുത്തുറ്റ ഡിസൈൻ.
വാറൻ്റിയും പിന്തുണയും
Marathon watches are manufactured to high standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Marathon website. For technical support, service, or parts inquiries, please contact Marathon customer service directly.
ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Please refer to the official Marathon webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.
