SwellPro Fisherman Drone FD1 User Manual

ആമുഖം

The SwellPro Fisherman Drone FD1 is a waterproof unmanned aerial vehicle designed for fishing applications. It enables shore-based anglers to extend casting range and deploy baits up to 2kg. This manual provides essential information for the safe and effective operation and maintenance of your SwellPro Fisherman Drone FD1.

ബോക്സിൽ എന്താണുള്ളത്

അൺബോക്സിംഗ് ചെയ്യുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1x SwellPro Fisherman Drone FD1 Aircraft
• 1XX റിമോട്ട് കൺട്രോളർ
• 2x (pair) Propellers
• 1x Drone Battery
• 1x Balance Charger
• 1x മൈക്രോ യുഎസ്ബി കേബിൾ
• 1x PL1-F Payload Release Mechanism

Image: The SwellPro Fisherman Drone FD1, an orange and black waterproof drone with four propellers and landing gear.

സജ്ജമാക്കുക

1. പ്രൊപ്പല്ലർ ഇൻസ്റ്റലേഷൻ

Carefully attach the propellers to the corresponding motor shafts. Ensure they are securely fastened according to the markings (e.g., CW for clockwise, CCW for counter-clockwise) to prevent detachment during flight.

2. ബാറ്ററി ചാർജിംഗും ഇൻസ്റ്റാളേഷനും

Before first use, fully charge the drone battery using the provided balance charger and Micro USB cable. Once charged, insert the battery into the drone's designated compartment, ensuring a secure connection.

3. റിമോട്ട് കൺട്രോളർ തയ്യാറാക്കൽ

Install the required batteries (not always included, check packaging) into the remote controller. Power on the controller and ensure it pairs successfully with the drone before attempting flight.

4. Pre-Flight Checks and Calibration

Always perform pre-flight checks. This includes verifying propeller security, battery levels for both drone and remote, and checking for any physical damage. Calibrate the compass and other sensors as instructed in the quick start guide to ensure accurate navigation and stable flight. The elevated GPS and altimeter pod design enhances precision and reduces interference.

ഡ്രോൺ പ്രവർത്തിപ്പിക്കൽ

അടിസ്ഥാന ഫ്ലൈറ്റ് നിയന്ത്രണങ്ങൾ

Familiarize yourself with the remote controller's joysticks and buttons. Practice basic maneuvers in an open, safe area away from obstacles, people, and animals. The drone features Auto-Landing for safe descent.

Payload Release (PL1-F)

Image: The PL1-F Payload Release mechanism, a grey and black device designed to attach to the drone for dropping bait.

The PL1-F payload release allows for precise deployment of fishing baits or lines. Attach the payload securely to the mechanism. Operate the release function via the remote controller when the drone is positioned over the desired drop zone. The drone can carry payloads up to 2kg.

Sky-Trolling Feature

The Sky-Trolling feature allows the drone to tow your fishing line to attract pelagic fish. For enhanced safety and line protection, consider using the optional TrollSafe release device, which automatically releases the line upon a strike. Adjust TrollSafe sensitivity based on fishing conditions.

ചിത്രം: ഒരു ആകാശ ചിത്രം view showing the orange SwellPro drone on a sandy beach surrounded by several fish, illustrating its use in fishing.

Image: A person on a beach holding a large fish and the SwellPro Fisherman Drone, demonstrating successful fishing with the drone.

കാറ്റ് പ്രതിരോധം

The drone's propulsion system and flight computer are optimized for flight in winds up to Beaufort Force 7. Always assess wind conditions before flight to ensure safe operation.

Anti-Pendulum Feature

When carrying a payload, drones may exhibit a pendulum motion. The Anti-Pendulum Feature on the Fisherman Drone reduces this effect by controlling acceleration and deceleration, leading to more stable payload delivery.

വാട്ടർപ്രൂഫ് ഡിസൈൻ

The SwellPro Fisherman Drone is designed to be waterproof, allowing for operation near and over water bodies. Ensure all seals and covers are properly secured before exposing the drone to water.

മെയിൻ്റനൻസ്

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ഡ്രോണിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

• വൃത്തിയാക്കൽ: After each use, especially in sandy or saltwater environments, thoroughly clean the drone. Pay close attention to motors, propeller mounts, and any crevices to remove sand, salt, or debris. Sand can cause wear and tear on moving parts.
• ബാറ്ററി കെയർ: Store batteries in a cool, dry place. Do not overcharge or over-discharge. If storing for extended periods, charge to approximately 50% capacity.
• പ്രൊപ്പല്ലർ പരിശോധന: Regularly inspect propellers for cracks, chips, or deformation. Replace damaged propellers immediately to maintain flight stability and safety.
• പൊതു പരിശോധന: Periodically check all screws, connections, and structural components for looseness or damage.

ട്രബിൾഷൂട്ടിംഗ്

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

• Drone Not Powering On: Ensure the battery is fully charged and correctly installed. Check for any visible damage to the battery or drone's power port.
• Remote Controller Not Connecting: Verify both the drone and remote controller are powered on. Ensure they are within range and attempt to re-pair them according to the quick start guide.
• Unstable Flight/Drifting: Perform a compass and IMU calibration. Check propellers for damage or incorrect installation. Ensure the drone is free of debris, especially sand, which can affect motor performance.
• Payload Release Malfunction: Check the connection of the PL1-F unit to the drone. Ensure no debris is obstructing the release mechanism.
• ജിപിഎസ് സിഗ്നൽ പ്രശ്നങ്ങൾ: നിങ്ങൾ തെളിഞ്ഞ കാലാവസ്ഥയുള്ള ഒരു തുറന്ന സ്ഥലത്താണെന്ന് ഉറപ്പാക്കുക view of the sky. Avoid flying near large metal structures or strong electromagnetic interference.

If issues persist, contact SwellPRO customer support for further assistance.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

SwellPRO products are covered by a manufacturer's warranty. For detailed warranty information, product support, or service inquiries, please refer to the official SwellPRO webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.