ആമുഖം
This manual provides essential information for the proper setup, operation, and maintenance of your Sparkleiot WS2812 Addressable LED Ring. This product features 35 individually addressable WS2812B 5050 RGB LEDs with a built-in driver, designed for various lighting applications requiring dynamic and customizable illumination.
സുരക്ഷാ വിവരങ്ങൾ
- Ensure the power supply is DC5V. Do not attempt to use DC12V or DC24V power supplies, as this will damage the LED ring.
- This product is designed for indoor use only. Avoid exposure to moisture or outdoor elements.
- Handle the LED ring with care to prevent damage to the LEDs or wiring.
- ഏതെങ്കിലും കണക്ഷനുകൾ നടത്തുന്നതിനോ വിച്ഛേദിക്കുന്നതിനോ മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Sparkleiot WS2812 LED Ring is a circular array of 35 individually addressable RGB LEDs. It comes with a pre-attached SM2.54-3P connector wire for easy integration into your projects.
Figure 1: The Sparkleiot WS2812 LED Ring, showing its illuminated state with various colors and its physical appearance when unlit, including the attached connector wire.
Figure 2: Key features of the LED ring, including its programmability, individual addressability, 256-level brightness, dynamic color display capabilities, and support for over 16 million full colors.
Figure 3: Physical dimensions of the LED ring, indicating an outer diameter of 96mm (3.77in) and an inner diameter of 78mm (3.07in).
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
Follow these steps to set up your LED ring:
- ഘടകങ്ങൾ തിരിച്ചറിയുക: Ensure you have the LED ring and a compatible 5V power supply and controller (e.g., Arduino, ESP8266, Nodemcu, SP103E, SP105E, K1000C, T1000S).
- പവർ ബന്ധിപ്പിക്കുക: Connect the 5V power supply to the appropriate pins on the LED ring's SM2.54-3P connector. The red wire is typically for +5V, and the black wire for GND.
- Connect Data: Connect the data input (DI) pin of the LED ring (green wire) to a digital output pin on your microcontroller (e.g., Arduino Pin 6).
- ഗ്രൗണ്ട് കണക്ഷൻ: Ensure the ground (GND) of the LED ring is connected to the ground of your microcontroller and power supply.
- പ്രോഗ്രാമിംഗ്: Upload your desired code to the microcontroller to control the individual LEDs. Libraries like Adafruit NeoPixel are commonly used for WS2812B LEDs.
Figure 4: A wiring diagram illustrating how to connect the LED ring to an Arduino board. Note the connections for Data Input (DI), 5V power, and Ground (GND). It explicitly states to only support DC5V and not to use DC12V or DC24V power supply.
Important: Only use a DC5V power supply. Using higher voltages (DC12V or DC24V) will permanently damage the LED ring.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once properly wired and programmed, the LED ring will display lighting patterns according to the code uploaded to your microcontroller. The individual addressability of each LED allows for complex and dynamic lighting effects.
- ഡൈനാമിക് കളർ ഡിസ്പ്ലേ: Utilize programming to create various color sequences and animations.
- തെളിച്ച നിയന്ത്രണം: Adjust the brightness of the LEDs through your code, leveraging the 256-level brightness capability.
- ഡെയ്സി ചെയിനിംഗ്: Multiple LED rings can be connected in series using their SM2.54-3P connectors, allowing for larger and more intricate lighting setups without the need for soldering between rings.
Figure 5: An illustration showing how multiple LED rings can be easily connected in series using their built-in connectors, eliminating the need for soldering for expansion.
Video 1: Demonstration of the 35 RGB LED Ring showcasing various full-color lighting effects and patterns.
മെയിൻ്റനൻസ്
The Sparkleiot WS2812 LED Ring requires minimal maintenance:
- Keep the LED ring clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid bending or twisting the LED ring excessively, as this may damage the internal circuitry or LEDs.
- Store in a dry environment away from direct sunlight and extreme temperatures.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| LED- കൾ പ്രകാശിക്കുന്നില്ല. | തെറ്റായ വൈദ്യുതി വിതരണം വോള്യംtage, loose connections, faulty wiring, incorrect code. | Verify power supply is DC5V. Check all wire connections. Ensure your code is correctly uploaded and configured for WS2812B LEDs. |
| Only some LEDs light up or flicker. | Insufficient power, data signal issues, damaged LED. | Ensure your power supply can provide enough current for all LEDs. Check data line connection. If a single LED is faulty, it may need replacement or bypassing. |
| നിറങ്ങൾ തെറ്റാണ്. | Incorrect color order in code, data line interference. | Adjust the color order in your programming (e.g., GRB vs. RGB). Ensure data line is not too long or exposed to significant electrical noise. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| LED ചിപ്പ് | WS2812B SMD5050 RGB LED |
| LED- കളുടെ എണ്ണം | 35 |
| ഇൻപുട്ട് വോളിയംtage | DC5V |
| വൈദ്യുതി ഉപഭോഗം | 9 വാട്ട്സ് (പരമാവധി) |
| കണക്റ്റിവിറ്റി | SM2.54-3Pin Connector |
| നിയന്ത്രണ രീതി | Individual Pixel Addressable (via microcontroller) |
| പുറം വ്യാസം | 96 മിമി (3.77in) |
| ആന്തരിക വ്യാസം | 78 മിമി (3.07in) |
| ഉപയോഗ പരിസ്ഥിതി | ഇൻഡോർ |
| പ്രത്യേക സവിശേഷതകൾ | Dimmable, 16+ Million Colors |
Figure 6: EU Energy Label for the Sparkleiot 5050-35LEDs, indicating energy efficiency class G and 8 kWh/1000h consumption. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/2155996.
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
