1. ആമുഖം
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Duravit D-Neo 0021690000 Round Closed-Front Toilet Seat with Soft Close. Please read this manual carefully before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your product.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always wear appropriate personal protective equipment (PPE) during installation, such as gloves and eye protection.
- Ensure all fasteners are securely tightened to prevent the seat from shifting during use. Do not overtighten, as this may damage the product.
- Avoid using abrasive cleaners, solvents, or harsh chemicals on the toilet seat, as these can damage the plastic surface and the soft-close mechanism.
- Do not stand on the toilet seat or lid. This product is designed for seating only.
- Keep small children away from the toilet seat during installation to prevent injury from tools or small parts.
3. പാക്കേജ് ഉള്ളടക്കം
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Duravit customer support.
- Duravit D-Neo Round Closed-Front Toilet Seat with Lid
- Mounting Hardware (hinges, bolts, washers, nuts)

Figure 3.1: Duravit D-Neo Toilet Seat with lid open, showing the seat and mounting points.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to properly install your Duravit D-Neo toilet seat.
- ടോയ്ലറ്റ് ബൗൾ തയ്യാറാക്കുക: Ensure the toilet bowl's mounting holes are clean and free of debris. Remove any old toilet seat and hardware.
- മൗണ്ടിംഗ് ബോൾട്ടുകൾ തിരുകുക: Place the rubber washers over the mounting holes on the toilet bowl. Insert the threaded bolts of the hinge assembly through the washers and holes.
- Attach Hinges to Seat: Align the hinge posts with the corresponding holes on the underside of the toilet seat. Secure the hinges to the seat using the provided screws, ensuring they are snug but not overtightened.
- സീറ്റ് സ്ഥാപിക്കുക: Carefully lower the toilet seat onto the toilet bowl, guiding the hinge bolts through the mounting holes.
- സീറ്റ് ഉറപ്പിക്കുക: From underneath the toilet bowl, place the plastic washers and then the nuts onto the threaded bolts. Hand-tighten the nuts initially to allow for adjustment.
- Adjust and Finalize: Adjust the seat position to ensure it is centered and aligned with the toilet bowl. Once aligned, fully tighten the nuts with a wrench. Do not overtighten.

ചിത്രം 4.1: ക്ലോസപ്പ് view of the Duravit D-Neo toilet seat hinges installed on a toilet bowl.

Figure 4.2: Top-down diagram illustrating the dimensions of the Duravit D-Neo toilet seat.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Duravit D-Neo toilet seat features a soft-close mechanism for both the seat and the lid, designed to prevent slamming and reduce noise.
- സോഫ്റ്റ്-ക്ലോസ് ഫംഗ്ഷൻ: To engage the soft-close feature, simply push the seat or lid down gently. The mechanism will take over, allowing it to close slowly and quietly on its own.
- Do not force the seat or lid closed, as this can damage the soft-close mechanism over time.

Figure 5.1: The Duravit D-Neo toilet seat in its closed position, demonstrating the soft-close feature.
6. മെയിന്റനൻസ് & ക്ലീനിംഗ്
Regular cleaning and proper maintenance will help preserve the appearance and functionality of your toilet seat.
- പ്രതിദിന ശുചീകരണം: മൃദുവായ തുണി ഉപയോഗിക്കുക dampened with mild soap and water to wipe down the seat and lid.
- കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക: Do not use abrasive cleaners, scouring pads, strong detergents, disinfectants containing chlorine, or aerosol cleaners. These can scratch the surface, dull the finish, or damage the soft-close mechanism.
- ഉണക്കൽ: Always dry the seat thoroughly with a soft, clean cloth after cleaning to prevent water spots.
- ഹിഞ്ച് കെയർ: Periodically check the hinge connections for tightness. If the seat feels loose, gently tighten the mounting nuts.
7. പ്രശ്നപരിഹാരം
പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അറിയാൻ താഴെയുള്ള പട്ടിക കാണുക.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Seat is loose or shifts | Mounting nuts are not tight enough. | ടോയ്ലറ്റ് ബൗളിന് താഴെയുള്ള മൗണ്ടിംഗ് നട്ടുകൾ മുറുക്കുക. അധികം മുറുക്കരുത്. |
| Soft-close mechanism not working | Mechanism is obstructed or damaged. | Check for any obstructions around the hinges. If damaged, contact customer support for replacement parts or warranty service. |
| Seat does not align with bowl | Seat was not properly aligned during installation. | Loosen the mounting nuts, adjust the seat to the correct position, then retighten the nuts. |
8 സ്പെസിഫിക്കേഷനുകൾ
Key specifications for the Duravit D-Neo 0021690000 Toilet Seat:
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 0021690000 |
| ടൈപ്പ് ചെയ്യുക | Round, Closed-Front |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| നിറം | വെള്ള |
| പ്രത്യേക സവിശേഷതകൾ | സോഫ്റ്റ്-ക്ലോസ് ലിഡ് |
| ഉൽപ്പന്ന അളവുകൾ | 18.2"L x 14.4"W (ഏകദേശം) |
| ഇനത്തിൻ്റെ ഭാരം | 6 പൗണ്ട് |

Figure 8.1: Bottom-up diagram illustrating additional dimensions of the Duravit D-Neo toilet seat.
9. വാറൻ്റി വിവരങ്ങൾ
The Duravit D-Neo 0021690000 Round Closed-Front Toilet Seat is covered under Duravit's 1 വർഷത്തെ പരിമിത വാറൻ്റി. This warranty covers defects in material and workmanship under normal residential and commercial use.
For full warranty terms and conditions, please visit the official Duravit webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
10. ഉപഭോക്തൃ പിന്തുണ
If you have any questions, require assistance with installation, or need to report a defect, please contact Duravit customer support through their official webനിങ്ങളുടെ വാങ്ങലിനൊപ്പം നൽകിയിരിക്കുന്ന സൈറ്റ് അല്ലെങ്കിൽ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ.
For more information about Duravit products, visit: www.duravit.us





