ആമുഖം
This instruction manual provides comprehensive guidance for the safe and proper installation and operation of your PERLESMITH TV Wall Mounts, including both the PSMTK1 Tilting Mount and the PSMFK12 Full Motion Mount. Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent damage or injury.
These mounts are designed to securely hold your television, optimizing viewing angles and saving space. The PSMTK1 is a low-profile tilting mount, while the PSMFK12 offers full motion articulation.
Image: The PERLESMITH PSMTK1 Tilting TV Wall Mount (top) and the PSMFK12 Full Motion TV Wall Mount (bottom) with included hardware.
പ്രധാനപ്പെട്ട സുരക്ഷാ മുൻകരുതലുകൾ
- Do not install on drywall alone. Ensure mounting into wood studs, solid concrete, or brick walls.
- Verify your TV's VESA mounting hole pattern, weight, and port location before purchase and installation.
- Do not exceed the maximum weight capacity: 115 lbs (52 kg) for PSMTK1 and 77 lbs (35 kg) for PSMFK12.
- Always use the included hardware. If you have any doubts about the installation, consult a qualified professional.
- ഇൻസ്റ്റാളേഷൻ സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
- റിലീസ് ചെയ്യുന്നതിന് മുമ്പ് എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.asinജി ടിവി.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
പ്രീ-ഇൻസ്റ്റലേഷൻ ചെക്ക്ലിസ്റ്റ്
- Confirm TV size compatibility: PSMTK1 for 23"-60" TVs, PSMFK12 for 26"-60" TVs.
- Check VESA compatibility:
- PSMTK1: 75x75mm, 100x75mm, 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x300mm, 400x400mm.
- PSMFK12: 100x100mm, 100x200mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x400mm.
- Locate wall studs (for wood stud installation) or ensure suitable concrete/brick wall.
- Gather necessary tools (e.g., drill, level, screwdriver, stud finder).
General Installation Steps (Applies to both models)
- ടിവിയിൽ ബ്രാക്കറ്റുകൾ ഘടിപ്പിക്കുക: Secure the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure they are centered and firmly attached.
- Mark Wall Position: Determine the desired height for your TV. Hold the wall plate against the wall and mark the drilling locations. Use a level to ensure accuracy.
- ഡ്രിൽ പൈലറ്റ് ദ്വാരങ്ങൾ: Drill pilot holes at the marked locations. Use a stud finder for wood studs. For concrete or brick, use a masonry drill bit and insert anchors.
- മൗണ്ട് വാൾ പ്ലേറ്റ്: Secure the wall plate to the wall using the provided lag bolts. Ensure it is level and tightly fastened.
- ടിവി തൂക്കിയിടുക: Carefully lift the TV with the attached brackets and hook it onto the wall plate. Ensure the brackets are properly seated.
- സുരക്ഷിത ടിവി: For the PSMTK1, use the pull cords to engage the safety locks. For the PSMFK12, ensure the arms are extended and adjusted as needed.
Specific Installation Notes for PSMTK1 (Tilting Mount)
Image: Visual guide showing the simplified 3-step installation process for the PSMTK1 tilting mount, including attaching brackets, mounting the wall plate, and hanging the TV with a pull cord lock and release mechanism.
The PSMTK1 mount is designed for quick and easy installation, often completed within 12 minutes. It features an enhanced hook for drop-free use and an anti-drop buckle for secure attachment. The low-profile design holds the TV just 1.2 inches from the wall.
Image: The PSMTK1 tilting mount highlighting its 115 lbs maximum weight capacity, 1.5x taller plate for stronger support, and features like the enhanced hook and anti-drop buckle for secure installation.
This mount can be installed on 16-inch wood studs, solid concrete, or brick walls. It is crucial not to install it on drywall alone.
Image: Diagram illustrating the compatibility of the PSMTK1 tilting mount with three wall types: wood studs (16.0" max, 8" min spacing), solid concrete, and brick walls. A warning indicates not to install on drywall alone.
Specific Installation Notes for PSMFK12 (Full Motion Mount)
Image: The PERLESMITH PSMFK12 Full Motion TV Wall Mount, showcasing its articulating arms and the assortment of screws, anchors, and washers included for installation.
The PSMFK12 mount features a sturdy and strong articulating arm, designed for durability and stability. It has been cycle-tested over 6,000 times for proven reliability and is UL listed (UL file നമ്പർ E522707).
Image: A graphic demonstrating the PERLESMITH PSMFK12 Full Motion TV Mount undergoing reliability testing, indicating it has been cycle-tested over 6,000 times and is UL listed, ensuring its strength and durability.
This mount supports single stud mounting for flexible placement, making installation easier and more adaptable to various room layouts.
Image: The PERLESMITH PSMFK12 Full Motion TV Mount shown installed on a single wall stud, emphasizing its flexible placement capability and ease of installation.
നിങ്ങളുടെ ടിവി മൗണ്ട് പ്രവർത്തിപ്പിക്കുന്നു
PSMTK1 Tilting Mount Operation
The PSMTK1 allows for a tilt adjustment of up to 7 degrees forward. This feature is designed to reduce glare from lights or windows and improve your viewing angle, especially if the TV is mounted higher than eye level.
Image: A television mounted with the PERLESMITH PSMTK1 tilting mount, demonstrating its ability to tilt forward by 7 degrees to reduce glare and optimize viewing for TVs between 23 and 60 inches.
To adjust the tilt, gently push or pull the bottom of the TV to achieve the desired angle. The mount will hold its position once set.
PSMFK12 Full Motion Mount Operation
The PSMFK12 offers full motion capabilities, allowing you to extend, swivel, and tilt your TV for optimal viewing from almost any angle in the room. This is particularly useful for large rooms or multi-purpose spaces.
Image: The PERLESMITH PSMFK12 Full Motion TV Mount showcasing its wide compatibility for TVs between 26 and 60 inches, with a weight capacity of 77 lbs and various VESA patterns from 100x100mm to 400x400mm.
- വിപുലീകരണം: Gently pull the TV away from the wall to extend the articulating arm.
- സ്വിവൽ: Rotate the TV left or right along the swivel axis to change the horizontal viewing ആംഗിൾ.
- ടിൽറ്റ്: Adjust the vertical tilt by loosening the tilt knobs (if present) on the TV brackets, setting the desired angle, and then re-tightening.
Always move the TV smoothly and avoid sudden jerks. Ensure cables are not pinched or strained during adjustments.
മെയിൻ്റനൻസ്
- പതിവ് പരിശോധന: Periodically check all screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments can cause them to loosen.
- വൃത്തിയാക്കൽ: മൗണ്ട് തുടയ്ക്കാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിക്കുക. ഫിനിഷിന് കേടുവരുത്തുന്ന അബ്രസിവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- Joint Lubrication (PSMFK12): If the articulating arm joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts. Do not use oil-based lubricants.
- കേബിൾ മാനേജുമെന്റ്: Ensure TV cables are neatly routed and not under tension, especially when adjusting the full motion mount.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഇൻസ്റ്റാൾ ചെയ്തതിന് ശേഷം ടിവി ലെവലിൽ അല്ല. | Wall plate or TV brackets not perfectly level. | Carefully adjust the wall plate or TV brackets. Some mounts have post-installation leveling features. |
| മൗണ്ട് അസ്ഥിരമായി തോന്നുന്നു. | Loose bolts, incorrect wall type, or exceeding weight capacity. | Re-tighten all bolts. Verify installation on appropriate wall type. Ensure TV weight is within limits. If unsure, consult a professional. |
| Difficulty tilting/swiveling (PSMFK12). | Joints are stiff or friction bolts are too tight. | Apply a small amount of silicone lubricant to the joints. Loosen friction bolts slightly if applicable (refer to specific model instructions). |
| TV not securely locked (PSMTK1). | Safety pull cords not engaged. | Ensure the pull cords are fully engaged to lock the TV brackets onto the wall plate. |
ഉൽപ്പന്ന സവിശേഷതകൾ
| ഫീച്ചർ | PSMTK1 (Tilting Mount) | PSMFK12 (Full Motion Mount) |
|---|---|---|
| ബ്രാൻഡ് | പെർലെസ്മിത്ത് | |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് | മതിൽ മൗണ്ട് |
| ചലന തരം | ചരിവ് | ആർട്ടിക്കുലേറ്റിംഗ്, ടിൽറ്റ് |
| മെറ്റീരിയൽ | അലോയ് സ്റ്റീൽ | |
| നിറം | കറുപ്പ് | |
| അനുയോജ്യമായ ടിവി വലുപ്പങ്ങൾ | 23 - 60 ഇഞ്ച് | 26 - 60 ഇഞ്ച് |
| പരമാവധി ഭാരം ശേഷി | 115 പൗണ്ട് (52 കി.ഗ്രാം) | 77 പൗണ്ട് (35 കി.ഗ്രാം) |
| VESA അനുയോജ്യത | 75x75mm മുതൽ 400x400mm വരെ | 100x100mm മുതൽ 400x400mm വരെ |
| കുറഞ്ഞ പ്രോfile Distance (from wall) | 1.2 ഇഞ്ച് | (Varies with extension) |
| പരമാവധി ടിൽറ്റ് ആംഗിൾ | 7 degrees forward | 15 degrees (overall, includes tilt) |
| യുഎൽ സാക്ഷ്യപ്പെടുത്തി | N/A | Yes (UL file നമ്പർ E522707) |
വാറൻ്റിയും പിന്തുണയും
PERLESMITH products are designed for durability and reliability. For specific warranty information regarding your TV wall mount, please refer to the warranty card included with your product or visit the official PERLESMITH webസൈറ്റ്.
If you encounter any issues during installation or operation, or if you have questions about your product, please contact PERLESMITH customer support. You can often find contact details on the product packaging, the PERLESMITH brand store on Amazon, or their official webസൈറ്റ്.
ഓൺലൈൻ പിന്തുണ: For additional resources, FAQs, and troubleshooting guides, please visit the PERLESMITH Brand Store on Amazon.
