ബെഹ്രിംഗർ ടിഡി-3 അനലോഗ് ബാസ് ലൈൻ സിന്തസൈസർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Behringer TD-3 Analog Bass Line Synthesizer. Please read this manual thoroughly to ensure proper use and to maximize the performance of your instrument.

The Behringer TD-3 is an analog bass line synthesizer designed to produce classic electronic music sounds. It features an all-analog signal path, a 16-step sequencer, and a resonant low-pass filter.

2. സജ്ജീകരണം

2.1 അൺപാക്കിംഗ്

Carefully remove the TD-3 from its packaging. Retain the packaging materials for future transport or storage.

2.2 പവർ കണക്ഷൻ

Connect the included DC power adapter to the 'DC IN' port on the rear panel of the TD-3. Plug the adapter into a suitable power outlet. Ensure the power switch is in the 'OFF' position before connecting power.

2.3 ഓഡിയോ കണക്ഷനുകൾ

• പ്രധാന put ട്ട്‌പുട്ട്: Connect the 'OUTPUT' jack (1/4" TS) on the rear panel to your mixer, audio interface, or ampജീവൻ.
• ഹെഡ്ഫോണുകൾ: Connect headphones to the 'PHONES' jack (1/4" TRS) on the front panel for private monitoring. Adjust the 'VOLUME' knob to a comfortable listening level.

2.4 MIDI/USB Connections

• മിഡി ഇൻ/ഔട്ട്: Use standard 5-pin DIN MIDI cables to connect the 'MIDI IN' and 'MIDI OUT' ports to other MIDI devices for synchronization or control.
• USB: Connect the USB port to a computer for MIDI control and firmware updates.

2.5 CV/Gate Connections

The TD-3 features 'CV OUT' and 'GATE OUT' jacks (3.5mm TS) for integration with modular synthesizers and other analog control voltage equipment. These outputs transmit pitch and gate information from the sequencer.

ചിത്രം 1: Front panel and rear connections of the Behringer TD-3. This image displays the various knobs, buttons, and input/output jacks, including the power input, audio output, headphone jack, MIDI ports, USB port, and CV/Gate connections, all essential for setting up the device.

3. Operating the TD-3

3.1 പവർ ചെയ്യുന്നു

After all connections are made, switch the 'POWER' button on the rear panel to the 'ON' position. The unit will power up.

3.2 നിയന്ത്രണങ്ങൾ കഴിഞ്ഞുview

The TD-3's front panel is divided into several sections:

• VCO (വാല്യംtage Controlled Oscillator): Controls the basic sound waveform and pitch.
• വിസിഎഫ് (വാല്യംtage Controlled Filter): ശബ്ദത്തിന്റെ തടി രൂപപ്പെടുത്തുന്നു.
• എൻവലപ്പ്: Controls the decay of the filter.
• സീക്വൻസർ: Programs and plays musical patterns.
• വളച്ചൊടിക്കൽ: Adds overdrive to the sound.
• വോളിയം: മൊത്തത്തിലുള്ള output ട്ട്‌പുട്ട് നില ക്രമീകരിക്കുന്നു.

3.3 VCO Section

• ട്യൂൺ: Adjusts the overall pitch of the oscillator.
• തരംഗരൂപം: Selects between Sawtooth (bright, rich harmonics) and Square (hollow, reedy) waveforms.

3.4 VCF Section

• വിച്ഛേദിക്കുക: Sets the frequency at which the filter begins to attenuate higher frequencies.
• അനുരണനം: Emphasizes frequencies around the cutoff point, creating a 'wah' effect at higher settings.
• കവര്: Controls the amount of filter envelope modulation applied to the cutoff frequency.
• ഡിസംബർ: Determines the length of the filter envelope's decay phase.
• ആക്സന്റ്: Controls the intensity of the accent effect on notes.

3.5 സീക്വൻസർ പ്രവർത്തനം

The TD-3 features a powerful 16-step sequencer for creating bass lines.

• മോഡ് സ്വിച്ച്: Selects between 'WRITE' (for programming patterns) and 'PLAY' (for playing patterns or tracks).
• TRACK/PATTERN Selector: In 'PLAY' mode, choose between playing a single 'PATTERN' or a 'TRACK' (a chain of patterns). In 'WRITE' mode, select 'TRACK' to edit a track or 'PATTERN' to edit a pattern.
• PATTERN GROUP: Selects one of four groups (I, II, III, IV), each containing 8 patterns (1-8).
• ടെമ്പോ: Adjusts the playback speed of the sequencer.
• ആരംഭിക്കുക/നിർത്തുക: Initiates or halts sequencer playback.
• WRITE/NEXT: Used to confirm steps during pattern writing or to advance to the next step.
• PITCH MODE: Selects the input source for pitch information (INT for internal keyboard, MIDI, USB, TRIG for external trigger).
• ടൈം മോഡ്: Sets the clock resolution for external synchronization (1PPS, 2PPQ, 24PPQ, 48PPQ).
• ഫങ്ഷൻ ബട്ടണുകൾ: These buttons (DEL, INS, CH, COPY, PASTE, TRANSPOSE, ACCENT, SLIDE) perform various editing functions within the sequencer.
• STEP Buttons (1-8, 9, 0, 100, 200): Used for entering notes, selecting steps, and other functions depending on the mode.

3.6 Distortion Section

• ഓൺ/ഓഫ് സ്വിച്ച്: Engages or bypasses the built-in distortion effect.
• വളച്ചൊടിക്കൽ: ഓവർ ഡ്രൈവിന്റെ അളവ് ക്രമീകരിക്കുന്നു.
• ടോൺ: Shapes the frequency content of the distorted sound.
• ലെവൽ: Controls the output level of the distortion effect.

3.7 വോളിയം നിയന്ത്രണം

The 'VOLUME' knob adjusts the overall output level of the TD-3. Use this to balance the TD-3's output with other instruments in your setup.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

Clean the TD-3 with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish and internal components.

4.2 സംഭരണം

When not in use, store the TD-3 in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use the original packaging or a suitable protective case.

4.3 ഫേംവെയർ അപ്ഡേറ്റുകൾ

ബെഹ്രിംഗർ ഇടയ്ക്കിടെ പരിശോധിക്കുക website for available firmware updates. Updates can provide new features, improvements, and bug fixes. Follow the instructions provided with the firmware update carefully.

5. പ്രശ്‌നപരിഹാരം

5.1 ശബ്ദ ഔട്ട്പുട്ട് ഇല്ല

• Ensure the power adapter is correctly connected and the unit is powered on.
• ശരിയായ കണക്ഷനും സമഗ്രതയും ഉറപ്പാക്കാൻ എല്ലാ ഓഡിയോ കേബിളുകളും പരിശോധിക്കുക.
• Verify the 'VOLUME' knob is turned up.
• If using headphones, ensure they are fully plugged in and the volume is adjusted.
• Confirm that a pattern is playing and the 'MODE' switch is set to 'PLAY'.

5.2 Sequencer Not Playing

• Press the 'START/STOP' button to initiate playback.
• Ensure the 'MODE' switch is set to 'PLAY'.
• Check the 'TEMPO' knob setting; it might be set to a very slow speed.
• If synchronized externally, verify the external clock source is active and the 'TIME MODE' is correctly set.

5.3 MIDI Control Issues

• Ensure MIDI cables are connected correctly (MIDI OUT of controller to MIDI IN of TD-3).
• Verify that the TD-3 and your MIDI controller are on the same MIDI channel.
• Check the 'PITCH MODE' setting on the TD-3 to ensure it is set to 'MIDI' or 'USB' as appropriate.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

Behringer products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official Behringer webനിങ്ങളുടെ സൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരനെ ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

കൂടുതൽ സഹായത്തിന്, സന്ദർശിക്കുക ആമസോണിലെ ബെഹ്രിംഗർ സ്റ്റോർ or the official Behringer support page.