Sparco SEAT R100 Reclining Seat Instruction Manual

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Sparco SEAT R100 is a high-quality reclining seat designed for automotive and simulation applications. It features a robust construction with thick padding and strong bolstering for comfort and durability. The seat includes provisions for multi-point seatbelt harnesses and offers adjustability for optimal positioning.

ഫ്രണ്ട് view of the Sparco SEAT R100 Reclining Seat, showcasing its ergonomic design and black/gray upholstery.

പാക്കേജ് ഉള്ളടക്കം

Verify that all components are present before beginning assembly. The standard package includes:

• Sparco SEAT R100 Reclining Seat
• Basic mounting hardware (bolts, washers, nuts, Allen key)

Note: Seat slide rails and specific vehicle mounting brackets are typically sold separately and may be required for installation.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for safety and performance. If you are unsure about any step, consult a professional.

1. Preparing the Seat Slide Rails (if applicable)

If using seat slide rails, ensure they are properly opened and functional before mounting. This typically involves engaging the release mechanism to allow movement.

2. Mounting the Seat to the Slider/Frame

The Sparco R100 seat is designed with universal mounting holes for compatibility with various seat sliders and frames, including NRG and other aftermarket options. Secure the seat to the slider or frame using the provided hardware. Ensure all bolts are tightened to the manufacturer's specifications.

The mounting brackets typically offer multiple adjustment points for tilt. Select the desired tilt position before final tightening.

വശം view of the Sparco SEAT R100, highlighting the reclining mechanism and robust side bolstering.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

റീക്ലൈനിംഗ് ഫംഗ്ഷൻ

To recline the seat, locate the lever on the side of the seat (typically on the right side). Pull the lever upwards and lean back to adjust the seatback to your desired angle. Release the lever to lock the seatback in place.

Seat Slide Adjustment (if applicable)

If your setup includes seat slide rails, locate the adjustment bar at the front of the seat. Lift the bar to unlock the slides, then push or pull the seat to move it forward or backward. Release the bar to lock the seat in the new position.

Seatbelt Harness Integration

The Sparco R100 seat is equipped with openings for multi-point seatbelt harnesses. Thread the harness straps through these openings as per the harness manufacturer's instructions to ensure proper fit and safety.

പിൻഭാഗം view of the Sparco SEAT R100, showing the harness pass-throughs and the overall seatback structure.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: For general cleaning, wipe the seat upholstery with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. For fabric sections, a vacuum cleaner with a brush attachment can remove dust and debris.
• പരിശോധന: Periodically inspect all mounting hardware, bolts, and adjustment mechanisms for tightness and proper function. Tighten any loose fasteners.
• പാഡിംഗ്: The seat features thick, durable padding. If the removable pads become worn, replacement pads may be available from the manufacturer.

ട്രബിൾഷൂട്ടിംഗ്

• Seat not reclining: Ensure the reclining lever is fully engaged and not obstructed. Check for any debris or damage to the reclining mechanism.
• Seat not sliding: If equipped with a slider, ensure the adjustment bar is fully lifted. Check for obstructions in the slide rails or damage to the mechanism.
• Uncomfortable seating: Consider adding additional lumbar support if needed. Ensure the seat is properly adjusted for your body type and the mounting angle is appropriate.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or to purchase replacement parts, please contact Sparco customer service or visit their official webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

നിർമ്മാതാവ്: സ്പാർകോ