Tesvor S6 Robot Vacuum Cleaner User Manual

1. ആമുഖം

The Tesvor S6 Robot Vacuum Cleaner is an advanced robotic cleaning device designed to efficiently clean your home. Featuring precision LiDAR navigation, powerful 2700Pa suction, and Wi-Fi connectivity, it offers a comprehensive cleaning solution for various floor types, from hard floors to medium-pile carpets. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Tesvor S6 to ensure optimal performance and longevity.

Figure 1: Tesvor S6 Robot Vacuum Cleaner

2. സജ്ജീകരണം

2.1 അൺബോക്സിംഗും ഘടക പരിശോധനയും

പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. ഇനിപ്പറയുന്ന ഇനങ്ങൾ നിങ്ങളുടെ പക്കലുണ്ടെന്ന് ഉറപ്പാക്കുക:

• Tesvor S6 Robot Vacuum Cleaner
• Remote Control (2 x AAA batteries not included)
• ചാർജിംഗ് ബേസ്
• പവർ അഡാപ്റ്റർ
• ക്ലീനിംഗ് ടൂൾ
• Extra set of High-Performance Filters
• 4 സൈഡ് ബ്രഷുകൾ
• ഉപയോക്തൃ ഗൈഡ് (ഈ പ്രമാണം)

2.2 ചാർജിംഗ് ബേസ് പ്ലേസ്മെന്റ്

Place the charging base against a wall in an open, uncluttered area. Ensure there is at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front of the charging base for the robot to navigate effectively.

2.3 പ്രാരംഭ ചാർജിംഗ്

Connect the power adapter to the charging base and plug it into a wall outlet. Place the robot vacuum onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For first use, fully charge the robot (approximately 4-5 hours).

2.4 ആപ്പ് കണക്ഷൻ

To unlock the full potential of your Tesvor S6, connect it to the Tesvor App. This allows for scheduling, zone cleaning, no-go zones, and real-time mapping.

1. Download the Tesvor App from your smartphone's app store.
2. Ensure your robot is powered on.
3. Open the Tesvor App and follow the on-screen instructions to add your device. Make sure your Wi-Fi network is 2.4GHz.

Figure 2: Tesvor App Control Interface, showing options for schedules, real-time map, no-go zones, custom cleaning zones, and spot cleaning.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 ഒരു ക്ലീനിംഗ് സൈക്കിൾ ആരംഭിക്കുന്നു

Press the power button on the robot or use the Tesvor App/remote control to start a cleaning cycle. The robot will automatically map your home using LiDAR navigation and clean in an efficient Z-shape route.

Figure 3: Illustration of the Tesvor S6's efficient Z-shape cleaning route compared to less efficient patterns.

3.2 ക്ലീനിംഗ് മോഡുകളും സവിശേഷതകളും

• ഓട്ടോ ക്ലീൻ: മാപ്പ് ചെയ്തിരിക്കുന്ന പരിസ്ഥിതിയെ അടിസ്ഥാനമാക്കി റോബോട്ട് ബുദ്ധിപരമായി നിങ്ങളുടെ വീട് വൃത്തിയാക്കുന്നു.
• സ്പോട്ട് ക്ലീൻ: Direct the robot to clean a specific area with concentrated suction.
• Zone Clean: Define specific areas on the app map for the robot to clean.
• നിരോധിത മേഖലകൾ: Set virtual boundaries on the app map to prevent the robot from entering certain areas.
• പരവതാനി ബൂസ്റ്റ്: The robot automatically increases suction power when it detects carpets for deeper cleaning.

Figure 4: The Tesvor S6 automatically optimizes suction power when transitioning from hard floor to carpet for deep cleaning.

3.3 Self-Charging

When the battery is low, the Tesvor S6 will automatically return to its charging base. Ensure the charging base is accessible and clear of obstacles.

4. പരിപാലനം

Regular maintenance is crucial for the optimal performance and longevity of your Tesvor S6. Perform these cleaning tasks regularly as recommended.

4.1 Cleaning the Dust Box and Filters

Empty the dust box after each cleaning cycle and clean the filters weekly.

1. റോബോട്ട് പവർ ഓഫ് ചെയ്യുക.
2. Hold the orange button on the dust box and pull it out.
3. Open the dust box and pour out the collected debris.
4. Remove the pre-filter and gently clap it to remove dust.
5. Open the other side of the dust box, take out the HEPA filters and sponge, and clean them.
6. Reinstall all parts into the dust box and insert it back into the robot.

4.2 Cleaning and Installing the Water Tank (Mopping System)

If you use the mopping function (water tank sold separately), clean the water tank after each use.

1. Power off the robot and take out the water tank (which includes a small dust box).
2. Pour out any dust from the integrated dust box into a dust bin.
3. Take the mopping pad off the water tank, hand wash the pad, and air dry it.
4. Attach the dry mopping pad to the water tank, aligning it to the correct position.
5. Pour out any remaining water from the water tank to keep it clean.
6. Open the blue cap of the water tank, pour in a proper amount of water, and tightly lock the cap, ensuring it does not leak water.
7. Install the water tank as instructed, power on the robot, and use the mopping function via the app or remote control.

Note: Please do not use the mopping function on your carpet or rugs, otherwise, it will get stuck and wet your carpets.

4.3 റോളർ ബ്രഷ് വൃത്തിയാക്കൽ

Clean the roller brush regularly to prevent hair entanglement and maintain cleaning efficiency.

1. Power off the robot and place it upside down on a flat surface.
2. Take off the yellow roller brush cover and remove the roller brush.
3. Use a knife or scissors to cut off any tangled hair, and clear out all stuck objects inside the brush.
4. After cleaning, install the roller brush, pressing hard until it fits correctly. Roll over the roller brush to ensure it moves smoothly.

4.4 Cleaning the Directional Wheel

Clean the directional wheel to ensure smooth navigation.

1. Power off the robot and place it upside down.
2. Use a knife or a similar tool to help roll over the directional wheel until you can see any stuck hair or debris. Cut it off for convenient cleaning.
3. Use tweezers to get the hair out.
4. If you cannot take out all the debris, use a tool (like a screwdriver) to slightly pull out one side of the wheel, then pull out the other side to remove the whole wheel.
5. Clean the wheel completely. After cleaning, install the wheel as instructed in the video. Press the wheel hard until you hear a sound that indicates it fits tightly. Roll over the wheel to ensure it is working fine.

4.5 Cleaning the Side Brushes

Regularly clean the side brushes to ensure effective edge cleaning.

1. Power off the robot and place it upside down.
2. Take off the side brushes and use the cleaning tool to clean the brushes, sweeping away dust and stuck pet hair.
3. Clean the other side brush as previously. Pay attention to the right and left when installing the side brushes.

4.6 Cleaning the Wheels

Inspect and clean the main wheels if they do not roll smoothly.

1. Power off the robot and place it upside down.
2. When the wheels do not roll smoothly, check if something is stuck in the wheel.
3. Press down one of the wheels, roll it over until you can see the objects stuck, then take them out.
4. Use tweezers to get the hard-to-reach objects.
5. Repeat the cleaning steps for the other wheel.

5. പ്രശ്‌നപരിഹാരം

If your Tesvor S6 encounters issues, refer to the following common problems and solutions. For more detailed troubleshooting, consult the full user guide PDF or contact customer support.

• റോബോട്ട് ഓണാക്കുന്നില്ല: Ensure the power button is switched on and the battery is charged.
• റോബോട്ട് ഇടയ്ക്കിടെ കുടുങ്ങുന്നു: Clear obstacles from the cleaning path. Use the app to set no-go zones around problematic areas.
• Poor suction performance: Empty the dust box, clean or replace filters, and check the roller brush for tangled hair.
• ആപ്പ് കണക്ഷൻ പ്രശ്നങ്ങൾ: Ensure your Wi-Fi is 2.4GHz. Try resetting the robot's Wi-Fi connection and re-pairing with the app.
• Robot not returning to charging base: Ensure the charging base is properly plugged in and free of obstructions.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

Your Tesvor S6 Robot Vacuum Cleaner comes with a worry-free 12-month warranty from the date of purchase. If you encounter any issues or have questions not covered in this manual, please contact Tesvor customer support for assistance.

For a complete and detailed user guide, please refer to the official PDF manual: Tesvor S6 User Manual (PDF)