ബെഹ്രിംഗർ TD-3-MO-AM അനലോഗ് ബാസ് ലൈൻ സിന്തസൈസർ ഉപയോക്തൃ മാനുവൽ

ഫ്രണ്ട് പാനൽ ലേഔട്ട്

Below is an image illustrating the front panel controls and connections of the TD-3-MO-AM synthesizer. Familiarize yourself with these components before operation.

ചിത്രം 1: Front panel of the Behringer TD-3-MO-AM Analog Bass Line Synthesizer. This image displays all knobs, buttons, and input/output jacks, including controls for Tune, Cutoff, Resonance, Envelope, Decay, Accent, Tempo, Wave, Track/Pattern Group, Mode, Gate, Slide Time, Sweep Speed, Filter FM, Volume, and various input/output ports.

2.1 അൺപാക്കിംഗും പരിശോധനയും

Carefully remove the synthesizer from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.

2.2 പവർ കണക്ഷൻ

Connect the provided power adapter to the DC IN port on the rear panel of the TD-3-MO-AM. Plug the adapter into a suitable power outlet. Ensure the power switch is in the OFF position before connecting power.

2.3 ഓഡിയോ putട്ട്പുട്ട്

Connect the AUDIO OUT jack (typically a 1/4" TS or TRS jack, though not explicitly listed in specs, common for synths) on the rear panel to your mixer, audio interface, or amplifier using a standard audio cable. For headphone monitoring, use the PHONES output.

2.4 മിഡി, യുഎസ്ബി കണക്ഷനുകൾ

The TD-3-MO-AM supports MIDI and USB connectivity for integration with other musical equipment or a computer.

• MIDI IN/OUT: Use standard 5-pin DIN MIDI cables to connect to other MIDI devices for sequencing or control.
• USB: Connect the USB-A port (as per specifications) to your computer for MIDI over USB and firmware updates.

2.5 CV/Gate Connections

The synthesizer features various CV (Control Voltage) and Gate inputs/outputs for integration with modular synthesizers and other analog gear.

• ACCENT IN, SLIDE IN, GATE IN, CV IN: These inputs allow external control over corresponding parameters.
• SYNC IN, ACCENT OUT, GATE OUT, CV OUT, FILTER OUT: These outputs provide control signals to other devices.

3.1 പവർ ഓൺ/ഓഫ്

To power on, ensure all connections are secure, then flip the power switch to the ON position. To power off, flip the switch to the OFF position and disconnect the power adapter.

3.2 Sound Generation Basics

The TD-3-MO-AM generates sound using an analog oscillator. Adjust the ട്യൂൺ ചെയ്യുക, വിച്ഛേദിക്കുക, റിസോണൻസ്, കവര്, ക്ഷയം, ഒപ്പം ആക്‌സൻ്റ് knobs to shape the sound. The വേവ് switch selects between sawtooth and square waveforms.

3.3 സീക്വൻസർ പ്രവർത്തനം

The built-in 16-step sequencer allows for programming bass lines. Use the മോഡ് switch to select between WRITE and PLAY modes. In WRITE mode, you can input notes and parameters for each step. In PLAY mode, the sequencer will playback the programmed pattern.

• എഴുതുക: For creating and editing patterns.
• പ്ലേ: For playing back patterns.
• TRK/PATT: Selects between Track and Pattern modes for sequencing.

ക്രമീകരിക്കുക ടെമ്പോ knob to control the playback speed of the sequencer.

3.4 ആർപെഗ്ഗിയറ്റർ

The arpeggiator can generate rhythmic patterns from held notes. Refer to the detailed manual for specific arpeggiator modes and controls.

3.5 Filter and Overdrive

The 4-pole resonant lowpass filter is a key component of the TD-3-MO-AM's sound. Use the വിച്ഛേദിക്കുക ഒപ്പം റിസോണൻസ് knobs to sculpt the tone. The ഓവർഡ്രൈവ് control adds distortion and grit to the sound.

4.1 വൃത്തിയാക്കൽ

To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the unit.

4.2 സംഭരണം

When not in use for extended periods, store the synthesizer in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage.

4.3 ഫേംവെയർ അപ്ഡേറ്റുകൾ

ബെഹ്രിംഗർ ഇടയ്ക്കിടെ പരിശോധിക്കുക website for firmware updates. Updates can provide new features, bug fixes, and performance improvements. Follow the instructions provided with the firmware update package carefully.

5.1 ശബ്ദ ഔട്ട്പുട്ട് ഇല്ല

• പവർ അഡാപ്റ്റർ സുരക്ഷിതമായി ബന്ധിപ്പിച്ചിട്ടുണ്ടെന്നും യൂണിറ്റ് ഓണാക്കിയിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• Check all audio cable connections from the TD-3-MO-AM to your mixer/interface/ampജീവൻ.
• Verify that the VOLUME knob on the TD-3-MO-AM is turned up.
• Confirm that your mixer/interface/amplifier is powered on and its input levels are correctly set.
• If using headphones, ensure they are properly plugged into the PHONES jack and the volume is adequate.

5.2 Sequencer Not Playing

• ഉറപ്പാക്കുക മോഡ് switch is set to PLAY.
• Verify that a pattern has been programmed and is selected.
• പരിശോധിക്കുക ടെമ്പോ knob; it might be set too low.
• If syncing externally, ensure the SYNC IN connection is active and receiving a valid clock signal.

5.3 MIDI/USB Connectivity Issues

• Ensure correct MIDI cable connections (MIDI OUT to MIDI IN, MIDI IN to MIDI OUT).
• For USB, verify the USB cable is securely connected to both the synthesizer and your computer.
• Check your computer's device manager or audio/MIDI settings to confirm the TD-3-MO-AM is recognized.
• Install any necessary drivers if prompted by your operating system (usually class-compliant, but check Behringer support).

7.1 ഉൽപ്പന്ന വാറന്റി

Behringer products typically come with a limited warranty covering manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Behringer webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

7.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Behringer customer support. You can find contact information and additional resources on the official Behringer webസൈറ്റ്: www.behringer.com.

For protection plans, refer to the options available at the point of purchase, such as those offered by Amazon:

• 3-വർഷ സംരക്ഷണ പദ്ധതി
• 4-വർഷ സംരക്ഷണ പദ്ധതി
• കംപ്ലീറ്റ് പ്രൊട്ടക്റ്റ് (പ്രതിമാസ പ്ലാൻ)