GEEKVAPE Aegis Solo 2 / S100 കിറ്റ് ഉപയോക്തൃ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The GEEKVAPE Aegis Solo 2 (S100) Kit is designed for durability and performance, featuring 2nd generation Tri-Proof technology for enhanced protection against water, dust, and shock. Its compact design offers a comfortable grip while maintaining a robust metallic aesthetic.

പ്രധാന സവിശേഷതകൾ:

• IP68 Rating for water and dust resistance
• 1.08" Full Screen Display for clear information
• Compatible with Z Sub-Ohm 2021 Tank
• 100W പരമാവധി ഔട്ട്പുട്ട്
• Powered by a single 18650 battery (NOT INCLUDED)

Image 1.1: The GEEKVAPE Aegis Solo 2 S100 Kit showcasing its available color options.

2. സജ്ജീകരണ ഗൈഡ്

2.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The Aegis Solo 2 / S100 Kit requires a single 18650 ബാറ്ററി for operation. Please note that the battery is ഉൾപ്പെടുത്തിയിട്ടില്ല in the package and must be purchased separately.

1. Unscrew the battery cap located at the bottom of the device by turning it counter-clockwise.
2. Insert a fully charged 18650 battery into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly as indicated inside the compartment.
3. Screw the battery cap back on clockwise until it is securely tightened.

2.2 Tank Assembly and Coil Installation

The kit includes the Z Sub-Ohm 2021 Tank. Follow these steps to assemble and prepare the tank:

1. Unscrew the base of the tank from the main body.
2. Insert a compatible Z Series coil into the tank from the bottom, ensuring it is firmly seated.
3. Screw the base back onto the tank body.
4. Screw the assembled tank onto the 510 connector of the Aegis Solo 2 mod until snug.

Image 2.1: Exploded diagram of the Z Sub-Ohm Tank components.

2.3 E-liquid Filling

To fill the Z Sub-Ohm 2021 Tank:

1. Locate the top cap of the tank.
2. Push the top cap to slide it open, revealing the filling port.
3. Insert the nozzle of your e-liquid bottle into the filling port and gently squeeze to fill the tank. Avoid filling into the central airflow tube.
4. Once filled, slide the top cap back into place until it clicks shut.
5. After filling a new coil, allow the e-liquid to soak into the coil for at least 5-10 minutes before first use to prevent dry hits.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 പവർ ഓൺ/ഓഫ്

To turn the device on or off, rapidly press the fire button 5 തവണ 2 സെക്കൻഡിനുള്ളിൽ.

3.2 വാട്ട് ക്രമീകരിക്കൽtage

Use the '+' and '-' adjustment buttons located below the screen to increase or decrease the wattage output. The wattage range is typically 5W to 100W.

3.3 Screen Display Information

The 1.08" full screen display provides essential information about your device's status:

• ബാറ്ററി നില: Indicated by an icon and percentage.
• വാട്ട്tage: നിലവിലെ പവർ ഔട്ട്പുട്ട്.
• Coil Resistance (Ω): Resistance of the installed coil.
• വാല്യംtagഇ (വി): Putട്ട്പുട്ട് വോളിയംtage.
• പഫ് കൗണ്ടർ: Tracks the number of puffs taken.

ചിത്രം 3.1: ക്ലോസ്-അപ്പ് view of the Aegis Solo 2 S100's 1.08" display screen.

3.4 Locking/Unlocking the Device

The Aegis Solo 2 features a convenient A-Lock switch on the side of the device. Slide the switch up to lock the device and prevent accidental firing or wattage adjustments. Slide it down to unlock.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

• Regularly clean the 510 connector on the mod and the base of the tank with a dry cloth or cotton swab to ensure good conductivity.
• For the tank, disassemble it and rinse the glass and metal parts (excluding the coil) with warm water. Allow all parts to dry completely before reassembly.

4.2 കോയിൽ മാറ്റിസ്ഥാപിക്കൽ

Coils are consumable parts and need to be replaced regularly, typically every 1-2 weeks depending on usage and e-liquid. Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor.

1. Ensure the tank is empty of e-liquid.
2. Unscrew the tank from the mod.
3. Unscrew the base of the tank.
4. Pull out the old coil from the tank.
5. Insert a new Z Series coil firmly into place.
6. Reassemble the tank and fill with e-liquid, allowing time for the new coil to prime.

4.3 പൊതു പരിചരണം

• Keep the device away from extreme temperatures (hot or cold) and direct sunlight.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ ഉപകരണം വരണ്ട സ്ഥലത്ത് സൂക്ഷിക്കുക.
• Avoid dropping the device, despite its shock resistance, to prevent internal damage.

5. പ്രശ്‌നപരിഹാരം

5.1 ഉപകരണം ഓണാക്കുന്നില്ല

• Ensure the 18650 battery is correctly inserted with the correct polarity.
• Check if the battery is charged. If not, charge it using an external battery charger.
• Press the fire button 5 times rapidly to power on the device.

5.2 No Vapor or Weak Vapor

• Check the e-liquid level in the tank.
• Ensure the coil is properly installed and not burnt out. Replace if necessary.
• വാട്ട് ക്രമീകരിക്കുകtage to a suitable level for your coil's resistance.
• Ensure the device is not locked (check A-Lock switch).

5.3 Leaking Tank

• Ensure all tank components are securely tightened, especially the coil and base.
• Check the O-rings for damage or displacement. Replace if needed.
• ടാങ്കിൽ അമിതമായി വെള്ളം നിറയ്ക്കുന്നത് ഒഴിവാക്കുക.
• Ensure the top cap is fully closed after filling.

5.4 Screen Not Displaying

• ഉപകരണം ഓണാണെന്ന് ഉറപ്പാക്കുക.
• ബാറ്ററി ചാർജ് പരിശോധിക്കുക.
• If the issue persists, try removing and reinserting the battery.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official GEEKVAPE webഉൽപ്പന്നം വാങ്ങിയ സൈറ്റിൽ നിന്നോ റീട്ടെയിലറെ ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

This product is intended for adult users only. Please adhere to all local laws and regulations regarding vaping products.