1. ആമുഖം
This manual provides instructions for the proper installation and use of the Morris Products 15067 90 Degree Flex Duplex Box Connector. This connector is designed for connecting two pieces of flexible metallic conduit (FMC), AC, MC, or NM sheathed cable to a steel box or other metal enclosure using a single knockout opening.
Image: Two Morris Products 15067 90 Degree Flex Duplex Box Connectors. These zinc die-cast connectors feature a 90-degree bend, designed for connecting two pieces of flexible metallic conduit or various types of sheathed cables to an electrical box.
2. ബോക്സിൽ എന്താണുള്ളത്?
The Morris Products 15067 package typically includes:
- Two (2) 3/8" Duplex 90 Degree Connectors (Model 15067)
3 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 15067 |
| കണക്റ്റർ തരം | 90 Degree Flex Duplex Box Connector |
| മെറ്റീരിയൽ | സിങ്ക് ഡൈ കാസ്റ്റ് |
| വ്യാപാര വലുപ്പം | 3/8" FMC (fits 1/2" knockout) |
| Screw Design | 2 Screw design, Combo Head Screws |
| Applicable Cables | Flexible Metallic Conduit, AC, MC, NM sheathed cable |
| NM Cable Compatibility | 14/2 Thru 12/3 NM |
| AC Cable Compatibility | 14/2 Thru 10/4 AC |
| MC Cable Compatibility | 14/2 Thru 10/3 MC |
| സർട്ടിഫിക്കേഷനുകൾ | cULus പട്ടികപ്പെടുത്തി |
| ഉൽപ്പന്ന അളവുകൾ | 4 x 6 x 12 ഇഞ്ച് |
| ഭാരം | 0.32 ഔൺസ് |
4. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
The Morris Products 15067 connector is designed for use in dry locations to connect two pieces of flexible metallic conduit or various types of sheathed cables to a steel outlet box or other metal enclosure.
ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല):
- Screwdriver (compatible with combo head screws)
- Wire strippers/cutters (as needed for cable preparation)
- Pliers or wrench (for tightening locknut, if applicable)
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- Prepare the Enclosure: Ensure the steel box or metal enclosure has a 1/2" knockout opening available for the connector. Remove the knockout if not already done.
- കേബിളുകൾ തയ്യാറാക്കുക: For each of the two cables (Flexible Metallic Conduit, AC, MC, or NM sheathed cable) to be connected, prepare the ends according to standard electrical practices, ensuring proper length and removal of outer sheathing as required for connection.
- Insert Cables into Connector: Loosen the two combo head screws on the connector. Insert one prepared cable end into each of the two openings of the 90-degree duplex connector. Ensure the cables are fully seated within the connector's clamps.
- സുരക്ഷിത കേബിളുകൾ: Tighten the two combo head screws firmly to secure both cables within the connector. Do not overtighten, but ensure a secure grip to prevent cable pull-out.
- Attach Connector to Enclosure: Insert the threaded end of the connector through the 1/2" knockout opening in the steel box or metal enclosure.
- സുരക്ഷിത കണക്റ്റർ: Thread the locknut (if supplied separately or integrated) onto the threaded end of the connector from inside the enclosure and tighten it securely to fasten the connector to the box.
- അന്തിമ പരിശോധന: Verify that both cables are securely held by the connector and that the connector is firmly attached to the enclosure. Ensure all connections comply with local electrical codes.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Morris Products 15067 connector is a passive component designed to facilitate secure electrical connections. Once properly installed as per the installation instructions, it operates by maintaining the physical and electrical integrity of the cable connections to the enclosure. No ongoing operational steps are required beyond initial installation.
പ്രധാനപ്പെട്ടത്: Ensure all electrical work is performed by qualified personnel and adheres to all applicable national and local electrical codes.
6. പരിപാലനം
The Morris Products 15067 90 Degree Flex Duplex Box Connector is a low-maintenance component. Once installed correctly, it typically requires no routine maintenance.
ആനുകാലിക പരിശോധനകൾ:
- വിഷ്വൽ പരിശോധന: Periodically inspect the connector and surrounding cables for any signs of physical damage, corrosion, or loosening.
- ദൃഢത: If accessible and safe to do so (with power disconnected), occasionally check the tightness of the screws securing the cables and the locknut securing the connector to the box. Retighten if necessary.
കുറിപ്പ്: Always disconnect power before performing any inspection or maintenance on electrical components.
7. പ്രശ്നപരിഹാരം
Most issues related to the Morris Products 15067 connector stem from improper installation. Review the installation steps carefully if you encounter problems.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Cables are loose in the connector. | Screws not tightened sufficiently. | Ensure power is off. Retighten the two combo head screws on the connector firmly. |
| Connector is loose on the enclosure. | Locknut not tightened properly. | Ensure power is off. Tighten the locknut on the threaded end of the connector from inside the enclosure. |
| Cannot insert cable into connector. | Screws not loosened enough; incorrect cable type/size. | Ensure screws are fully loosened. Verify cable type and size are compatible with the connector's specifications (e.g., 14/2 Thru 12/3 NM, 14/2 Thru 10/4 AC, 14/2 Thru 10/3 MC). |
| Connector does not fit knockout. | Incorrect knockout size. | This 3/8" FMC connector is designed to fit a 1/2" knockout. Ensure the knockout size is correct. |
If issues persist or you are unsure about any electrical work, consult a qualified electrician.
8. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support regarding Morris Products, please refer to the official Morris Products webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
മോറിസ് ഉൽപ്പന്നങ്ങളുടെ കോൺടാക്റ്റ് വിവരങ്ങൾ:
- Webസൈറ്റ്: www.morrisproducts.com (www.morrisproducts.com) എന്ന വെബ്സൈറ്റ് സന്ദർശിക്കുക. (കുറിപ്പ്: ഇതൊരു പ്ലെയ്സ്ഹോൾഡറാണ് URL, please verify the actual manufacturer's webപിന്തുണയ്ക്കുള്ള സൈറ്റ്.)
- കസ്റ്റമർ സർവീസ്: റഫർ ചെയ്യുക website for contact numbers or email support.
