എം.യു.ബിVIEW Adjustable Angle Mount User Manual

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your MUBVIEW Adjustable Angle Mount. This accessory is designed to enhance the viewing capabilities of your compatible video doorbell by allowing precise angle adjustments.

Figure 1: MUBVIEW Doorbell with Adjustable Angle Mount installed.

2 അനുയോജ്യത

MUBVIEW Adjustable Angle Mount is specifically designed for use with the following MUBVIEW video doorbell models:

• എം.യു.ബിVIEW J7 Doorbell
• എം.യു.ബിVIEW J9 Doorbell
• എം.യു.ബിVIEW J9 Plus Doorbell

Ensure your doorbell model is listed above for proper fit and function.

Figure 2: Visual representation of compatible MUBVIEW doorbell models (J7, J9, J9 Plus).

3 പ്രധാന സവിശേഷതകൾ

• ക്രമീകരിക്കാവുന്ന Viewഇൻ ആംഗിൾ: Allows horizontal adjustment from 25 to 50 degrees to optimize your doorbell's field of view.
• മെച്ചപ്പെടുത്തിയ ചലനം കണ്ടെത്തൽ: Improves the doorbell's ability to detect motion by providing a broader or more targeted viewing ഏരിയ.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Manufactured from rugged materials designed to withstand various outdoor weather conditions.
• എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Designed for straightforward installation, typically completed within 10-15 minutes with included hardware.

4. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• എം.യു.ബിVIEW ക്രമീകരിക്കാവുന്ന ആംഗിൾ മൗണ്ട്
• Mounting Screws (Stainless Steel)
• Wall Anchors (if applicable)
• ഇൻസ്റ്റലേഷൻ ഗൈഡ് (ഈ പ്രമാണം)

5. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Follow these steps to install your MUBVIEW Adjustable Angle Mount:

1. മൗണ്ടിംഗ് ഉപരിതലം തയ്യാറാക്കുക: Choose a suitable location on your wall where the doorbell will be installed. Ensure the surface is clean and stable.
2. Attach the Angle Mount: Position the angle mount at the desired location. Use the provided screws to secure the mount to the wall. If mounting on masonry or drywall, use appropriate wall anchors.
3. ആംഗിൾ ക്രമീകരിക്കുക: Loosen the adjustment screw on the side of the mount. Rotate the doorbell to achieve the desired horizontal viewing angle (between 25 and 50 degrees). Once the angle is set, tighten the adjustment screw firmly to secure the position.
4. Mount the Doorbell: Attach your compatible MUBVIEW J7, J9, or J9 Plus doorbell onto the adjustable angle mount according to your doorbell's specific mounting instructions. Ensure it is securely fastened.
5. ടെസ്റ്റ് പ്രവർത്തനം: Verify that the doorbell is securely mounted and that the camera's field of view is optimized for your needs.

Figure 3: Illustration of the adjustable angle mechanism, allowing rotation from 25 to 50 degrees.

ചിത്രം 4: ഉദാample of the MUBVIEW Adjustable Angle Mount with doorbell securely installed on a wall.

Figure 5: Comparison demonstrating the expanded visible area achieved with the angle mount versus without it.

6. ഓപ്പറേഷൻ

The primary function of the MUBVIEW Adjustable Angle Mount is to provide flexible positioning for your doorbell camera. Once installed, you can fine-tune the horizontal viewing കോൺ:

• To adjust the angle, gently loosen the adjustment screw located on the side of the mount.
• Carefully rotate the doorbell and mount assembly to the left or right until the desired field of view is achieved. The mount allows for adjustments between 25 and 50 degrees.
• Once the optimal angle is found, securely tighten the adjustment screw to lock the position. This ensures the doorbell remains stable and maintains its set viewing ആംഗിൾ.

7. പരിപാലനം

MUBVIEW Adjustable Angle Mount is constructed from durable, weather-resistant materials designed for outdoor use. Minimal maintenance is required:

• വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ മൃദുവായ, ഡി ക്ലീനർ ഉപയോഗിച്ച് മൗണ്ട് തുടയ്ക്കുക.amp cloth to remove dust, dirt, or debris. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
• പരിശോധന: Occasionally check the mounting screws to ensure they remain tight and secure. Re-tighten if necessary.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your MUBVIEW Adjustable Angle Mount, consider the following:

• മൗണ്ട് അയഞ്ഞതായി തോന്നുന്നു: Ensure all mounting screws are securely tightened. If installed with wall anchors, verify they are properly seated in the wall.
• ആംഗിൾ ക്രമീകരിക്കുന്നതിലെ ബുദ്ധിമുട്ട്: Check that the adjustment screw is sufficiently loosened before attempting to rotate the mount. Do not force the rotation.
• പാവം viewing angle after adjustment: Re-adjust the angle as described in the "Operation" section. Use your doorbell's live view feature to confirm the optimal field of view.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

എം.യു.ബിVIEW products are designed for reliability and performance. For specific warranty information or technical support, please refer to the documentation included with your original MUBVIEW doorbell or visit the official MUBVIEW webസൈറ്റ്. വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.