YITAMOTOR 4000lbs Forklift Lifting Hook

1. ആമുഖം

This manual provides essential information for the safe and effective use of your YITAMOTOR 4000lbs Forklift Lifting Hook. This attachment is designed to convert a standard forklift into a mobile crane, enabling the lifting and moving of heavy loads with a maximum capacity of 4000 pounds. Please read these instructions thoroughly before installation and operation to ensure safety and optimal performance.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Failure to follow these safety instructions can result in serious injury or death, and damage to equipment.

• Always ensure the forklift lifting hook is securely attached to the forklift forks before use.
• Do not exceed the maximum rated lifting capacity of 4000 lbs (1814 kg).
• Ensure the load is balanced and stable before lifting. Avoid sudden movements.
• Keep all personnel clear of the lifting area during operation.
• Inspect the hook, frame, and securing screws for any signs of wear, damage, or deformation before each use. Do not use if damaged.
• Operate the forklift and lifting hook on stable, level ground.
• സസ്പെൻഡ് ചെയ്ത ലോഡ് ഒരിക്കലും ശ്രദ്ധിക്കാതെ വിടരുത്.
• പ്രവർത്തന സമയത്ത് ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE) ധരിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The YITAMOTOR Forklift Lifting Hook is constructed from rugged steel with a gloss yellow powder coating for enhanced durability and corrosion resistance. It features a double-fork design to accommodate most standard pallet forks.

ഘടകങ്ങൾ:

• Main Lifting Frame (Yellow)
• Heavy Duty Load Hook (Red)
• Reinforcement Stabilization Design
• Two Large 'L' Screws for securing

Figure 1: Product Dimensions. This image illustrates the key measurements of the forklift lifting hook, including its overall length, fork slot dimensions, and the height of the attached load hook.

Figure 2: Anti-rust Spray Technology. This image shows a cutaway view of the hook's construction, emphasizing the rust-resistant coating and durable material design.

Figure 3: Reinforcement and Load Hook Detail. This image provides a detailed view of the structural reinforcement and the robust red load hook with its safety latch.

പാക്കേജ് ഉള്ളടക്കം:

Figure 4: Package Included. This image displays all items you should find in the product package, including the main hook assembly, securing screws, and the load hook.

• 1 x Forklift Lifting Hook Assembly
• 2 x Large 'L' Screws
• 1 x Heavy Duty Load Hook with Shackle

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to properly install the forklift lifting hook onto your forklift:

1. Ensure the forklift is parked on a level surface, the engine is off, and the parking brake is engaged.
2. Carefully slide the hoisting hook assembly over your forklift's pallet forks. The forks should pass through the designated fork slots on the lifting hook frame.
3. Position the lifting hook assembly to your desired fixed position along the length of the pallet forks. Ensure it is centered and stable.
4. Insert the two large 'L' screws into the securing holes on the top of the lifting hook frame. Tighten these screws firmly against the forklift forks to prevent any movement during operation.
5. Attach the heavy-duty load hook to the shackle on the underside of the lifting frame. Ensure the safety latch on the load hook is functional and securely closed.
6. Before lifting any load, perform a test lift with a light load to confirm stability and secure attachment.

Figure 5: Easy Installation Example. This image demonstrates the forklift lifting hook installed on a telehandler, lifting a bulk bag, showcasing its ease of attachment and use.

Figure 6: Secure Attachment Detail. This image provides a closer look at how the lifting hook is secured to the forklift forks, emphasizing the stability provided by the design.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the forklift lifting hook is securely installed, you can use your forklift as a mobile crane. Always prioritize safety during operation.

1. പ്രീ-ഓപ്പറേഷൻ പരിശോധന: Before each use, verify that the lifting hook is firmly attached to the forklift forks and that the 'L' screws are tight. Inspect the load hook and shackle for any damage.
2. ലോഡ് അറ്റാച്ച് ചെയ്യുക: Securely attach the load to the heavy-duty load hook. Ensure the load is properly balanced and that the hook's safety latch is closed.
3. Lift Load: Slowly and smoothly raise the forklift forks to lift the load. Avoid sudden jerks or rapid movements that could destabilize the load or the forklift.
4. Transport Load: Keep the load as low as possible during transport to maintain stability. Drive slowly and cautiously, especially when turning or on uneven terrain.
5. Lower Load: Slowly and smoothly lower the load to its destination. Ensure the area is clear before setting the load down.
6. Detach Load: Once the load is safely on the ground and stable, detach it from the lifting hook.

This forklift lifting hook is suitable for a wide range of applications, including:

• വെയർഹൗസുകൾ
• Industrial workplaces
• ഫാക്ടറികൾ
• ഫാമുകൾ
• Ranches
• നിർമ്മാണ സൈറ്റുകൾ

Figure 7: Wide-Range Use. This image collage illustrates the versatility of the forklift lifting hook across different environments such as factories, farms, construction sites, and logistics warehouses.

6. പരിപാലനം

Regular maintenance ensures the longevity and safe operation of your YITAMOTOR Forklift Lifting Hook.

• വൃത്തിയാക്കൽ: Clean the unit regularly to remove dirt, debris, and corrosive materials. Use a damp ആവശ്യമെങ്കിൽ തുണിയും മൃദുവായ ഡിറ്റർജന്റും.
• പരിശോധന: Periodically inspect the entire assembly for signs of wear, cracks, bends, or other damage. Pay close attention to the weld points, fork slots, 'L' screws, and the load hook.
• നാശ സംരക്ഷണം: The unit features a gloss yellow powder coating for rust and corrosion protection. If the coating is chipped or damaged, touch it up with a suitable rust-inhibiting paint to prevent corrosion.
• ലൂബ്രിക്കേഷൻ: Ensure the pivot points of the load hook and shackle are free-moving. Lubricate with a general-purpose grease if needed.
• സംഭരണം: Store the lifting hook in a dry, protected area when not in use to prevent exposure to harsh weather conditions.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues during the use of your forklift lifting hook, consider the following:

• Unstable Load: Ensure the load is properly centered and securely attached to the hook. Verify that the forklift forks are fully inserted into the lifting hook's slots and the 'L' screws are tightened.
• അറ്റാച്ചുചെയ്യാനുള്ള ബുദ്ധിമുട്ട്: Check that your forklift's fork dimensions are compatible with the lifting hook's fork slots (6''L x 3''W). Ensure no obstructions are preventing full insertion.
• ദൃശ്യമായ കേടുപാടുകൾ: If any part of the lifting hook shows signs of damage (cracks, bends, severe corrosion), discontinue use immediately and replace the affected component or the entire unit. Do not attempt to repair structural damage.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, returns, or technical support, please refer to the original purchase documentation or contact YITAMOTOR customer service directly through their official webഉൽപ്പന്നം വാങ്ങിയ സൈറ്റ് അല്ലെങ്കിൽ റീട്ടെയിലർ.