ECHOGEAR TV Cord Hider for Wall Mounted TV

ആമുഖം

The ECHOGEAR TV Cord Hider is an in-wall power and cable management kit designed to conceal power cables and low-voltage wires behind your wall-mounted television. This system provides a clean, professional look by eliminating visible cords, while also offering convenient access to power outlets and USB charging ports directly behind your TV.

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR TV Cord Hider. Please read all instructions carefully before beginning installation.

Figure 1: ECHOGEAR TV Cord Hider main components.

സുരക്ഷാ വിവരങ്ങൾ

Always prioritize safety during installation. Failure to follow these safety guidelines may result in property damage, injury, or electrical shock.

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure power is turned off at the circuit breaker before working with any electrical components. If you are unsure about electrical wiring, consult a qualified electrician.
• മതിൽ സമഗ്രത: Verify that the wall structure is suitable for installation. Avoid cutting into electrical wires, plumbing, or structural studs. Use a stud finder to locate studs and avoid them when cutting.
• ടൂൾ സുരക്ഷ: Use caution when using the included drywall saw or any other cutting tools. Wear appropriate personal protective equipment, such as safety glasses and gloves.
• കേബിൾ മാനേജുമെന്റ്: Do not overstuff the cable pass-through. Ensure cables are not pinched or damaged during installation.

ബോക്സിൽ എന്താണുള്ളത്

Your ECHOGEAR TV Cord Hider kit includes all necessary components for a complete installation:

• Top Power Box (with 2 AC Outlets & 2 USB-A Ports)
• Bottom Cable Pass-Through Box
• ഇൻസ്റ്റലേഷൻ ബ്രാക്കറ്റ്
• കട്ടിംഗ് ടെംപ്ലേറ്റ്
• ഡ്രൈവാൾ സോ
• 6-foot Low Profile എക്സ്റ്റൻഷൻ കോർഡ്
• മൗണ്ടിംഗ് സ്ക്രൂകൾ

Figure 2: Included components in the ECHOGEAR kit.

അൺബോക്സിംഗ് വീഡിയോ

Video 1: Official ECHOGEAR unboxing and overview of the TV Cord Hider kit.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

സുഗമമായ ഇൻസ്റ്റാളേഷൻ പ്രക്രിയയ്ക്കായി ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

1. പ്ലാൻ പ്ലേസ്മെൻ്റ്: Determine the ideal location for both the top power box (behind the TV) and the bottom cable pass-through box (near an existing outlet). Ensure both locations are between the same two vertical wall studs and free of any horizontal obstructions.
2. Mark and Cut: Use the included cutting template to accurately mark the cutouts for both the top and bottom units on your drywall. Carefully use the provided drywall saw to cut out the marked sections.

Figure 3: Using the template and drywall saw for precise cuts.

3. റൂട്ട് കേബിളുകൾ: കുറഞ്ഞ വോളിയത്തിന് ഭക്ഷണം നൽകുകtage cables (HDMI, Ethernet, etc.) through the brush plate opening of the top power box. The unique cable catching design helps prevent cables from falling into the wall cavity.

Figure 4: Routing low-voltage cables through the brush plate.

4. Install Units: Insert the top power box and bottom cable pass-through box into their respective cutouts. Secure them using the provided mounting screws.
5. പവർ ബന്ധിപ്പിക്കുക: Plug the included 6-foot low-profile extension cord into the bottom cable pass-through unit and then into an existing wall outlet. This powers the top unit.

Figure 5: Cables hidden behind a wall-mounted TV using the ECHOGEAR system.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed, the ECHOGEAR TV Cord Hider provides convenient power and cable access:

• എസി ഔട്ട്ലെറ്റുകൾ: The top power box features two standard AC outlets. These are ideal for powering your TV, soundbar, streaming devices, or other electronics. The design allows for awkwardly shaped power plugs without obstructing the second outlet.
• USB-A പോർട്ടുകൾ: Two USB-A ports are integrated into the top power box, perfect for charging streaming sticks, LED light strips, or other USB-powered accessories.

Figure 6: Utilizing the integrated USB-A ports for various devices.

• കുറഞ്ഞ വോള്യംtage Cable Pass-Through: The brush plate allows for easy routing of low-voltage cables such as HDMI, Ethernet, and audio cables, keeping them neatly organized and out of sight.

Figure 7: The ECHOGEAR system provides a clean, integrated look.

മെയിൻ്റനൻസ്

The ECHOGEAR TV Cord Hider requires minimal maintenance. Periodically inspect the units and cables for any signs of wear or damage. Ensure all connections remain secure. Clean the visible surfaces with a soft, dry cloth as needed.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your ECHOGEAR TV Cord Hider, consider the following common solutions:

• ഔട്ട്‌ലെറ്റുകൾ/യുഎസ്ബി പോർട്ടുകൾ എന്നിവയിലേക്ക് വൈദ്യുതിയില്ല:
  • Verify that the 6-foot extension cord is securely plugged into both the bottom cable pass-through unit and a functioning wall outlet.
  • ഔട്ട്‌ലെറ്റിൽ വൈദ്യുതി ലഭിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കാൻ നിങ്ങളുടെ വീട്ടിലെ സർക്യൂട്ട് ബ്രേക്കർ പരിശോധിക്കുക.
• Cables Not Fitting Through Pass-Through:
  • Ensure you are routing low-voltage cables (HDMI, Ethernet, etc.) through the brush plate, not power cables.
  • Avoid forcing too many cables through at once. The brush plate is designed to accommodate multiple cables but has limits.
• Plugs Obstructing Other Outlets:
  • Some larger power adapters (often called "wall warts") may block adjacent outlets. Consider using a short extension cord or a flexible adapter if this occurs.

For further assistance, refer to the support information below.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

ECHOGEAR stands by its products. For warranty information or technical support, please visit the official ECHOGEAR website or refer to the contact details provided in your product packaging. Our US-based support team is available to assist you with any questions or installation challenges.

You can also find additional installation videos and resources on the ECHOGEAR website to help simplify your DIY process.