Stelpro ASHC2002W

Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) Instruction Manual

Model: ASHC2002W

1. ആമുഖവും അവസാനവുംview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W, in white, viewed ഒരു കോണിൽ നിന്ന്.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

  • ഈ ഹീറ്റർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനോ ഉപയോഗിക്കുന്നതിനോ മുമ്പായി എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക.
  • Ensure the power supply is disconnected at the main circuit breaker before installation or maintenance.
  • Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
  • Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
  • ഈ ഹീറ്റർ ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.
  • Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജ് തുറക്കുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക:

  • Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
  • Concealed Mounting Bracket
  • Back Entry Plate with Cable Clamps
  • ഇൻസ്റ്റലേഷൻ ഹാർഡ്‌വെയർ (സ്ക്രൂകൾ, ആങ്കറുകൾ)
  • ഇൻസ്ട്രക്ഷൻ മാനുവൽ

4 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്സ്റ്റെൽപ്രോ
മോഡൽ നമ്പർASHC2002W
പവർ ഔട്ട്പുട്ട്2000W (at 240V) / 1500W (at 208V)
വാല്യംtage240 Volts (or 208 Volts)
ഇന്ധന തരംഇലക്ട്രിക്
ചൂടാക്കൽ കവറേജ്200 ചതുരശ്ര അടി വരെ
അളവുകൾ (H x W x D)17 9/16" x 35" x 3 15/16" (approx. 17.56" x 35" x 3.94")
ഇനത്തിൻ്റെ ഭാരം18.9 പൗണ്ട്
നിറംവെള്ള
മൗണ്ടിംഗ് തരംWall Mount (Surface-mount)
പ്രത്യേക സവിശേഷതകൾElectronic Thermostat, Energy Efficient, Fast Heating, Noiseless
Diagram showing the dimensions of the Stelpro convector heater: 17 9/16 inches high, 35 inches wide, and 3 15/16 inches deep.

ചിത്രം 4.1: ഉൽപ്പന്ന അളവുകൾ

5. ഇൻസ്റ്റലേഷൻ

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Illustration showing a 240V hardwired electrical connection with a warning triangle icon.

Image 5.1: Hardwired Connection Requirement

5.1 ഹീറ്റർ മൌണ്ട് ചെയ്യുന്നു

  1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
  2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
  3. Mark the drilling points on the wall using the concealed bracket as a template.
  4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
  5. നൽകിയിരിക്കുന്ന സ്ക്രൂകൾ ഉപയോഗിച്ച് മൗണ്ടിംഗ് ബ്രാക്കറ്റ് ഭിത്തിയിൽ ഉറപ്പിക്കുക.
  6. Ensure the bracket is level and securely fastened to support the heater's weight.
Image showing the concealed mounting bracket of the Stelpro convector heater, highlighting its 2000 Watts power, 5-year warranty, and totally quiet operation.

Image 5.2: Concealed Mounting Bracket

5.2 ഇലക്ട്രിക്കൽ വയറിംഗ്

  1. പ്രധാന സർക്യൂട്ട് ബ്രേക്കറിൽ വൈദ്യുതി ഓഫാണെന്ന് ഉറപ്പാക്കുക.
  2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
  3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
  4. Secure all connections and ensure no bare wires are exposed.
  5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
  6. പ്രധാന സർക്യൂട്ട് ബ്രേക്കറിൽ വൈദ്യുതി പുനഃസ്ഥാപിക്കുക.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Close-up of the Stelpro convector heater's built-in electronic thermostat with an LCD screen displaying '68°F'.

Image 6.1: Built-in Electronic Thermostat

6.1 താപനില ക്രമീകരിക്കുന്നു

  • Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
  • The heater will automatically maintain the set temperature.

6.2 ഓപ്പറേറ്റിംഗ് മോഡുകൾ

  • യാന്ത്രിക മോഡ്: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
  • സുരക്ഷാ മോഡ്: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ ഹീറ്ററിന്റെ മികച്ച പ്രകടനവും ദീർഘായുസ്സും ഉറപ്പാക്കുന്നു.

  • വൃത്തിയാക്കൽ: Ensure the heater is turned off and cool before cleaning. Use a soft, damp പുറംഭാഗം തുടയ്ക്കാൻ തുണി ഉപയോഗിക്കുക. അബ്രസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
  • Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
  • വാർഷിക പരിശോധന: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. പ്രശ്‌നപരിഹാരം

If your heater is not operating correctly, consult the following common issues before contacting support:

  • ഹീറ്റർ ഓണാക്കുന്നില്ല: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
  • അപര്യാപ്തമായ ചൂട്: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
  • അസാധാരണമായ ശബ്ദങ്ങൾ: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
  • Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. വാറൻ്റിയും പിന്തുണയും

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

  • 5-വർഷ പരിമിത വാറൻ്റി on the overall unit.
  • ആജീവനാന്ത വാറൻ്റി ചൂടാക്കൽ മൂലകത്തിൽ.
  • 3 വർഷത്തെ വാറൻ്റി on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webസൈറ്റ്.