1. ആമുഖം
Thank you for choosing the MiLESEEY D5 Digital Laser Measure Device. This device is designed for precise and efficient distance, area, and volume measurements, featuring an electronic angle sensor for enhanced accuracy. Please read this manual thoroughly before using the device to ensure safe and correct operation. Keep this manual for future reference.
2 സുരക്ഷാ വിവരങ്ങൾ
WARNING: Laser Radiation
- ലേസർ ബീമിലേക്ക് നോക്കരുത്.
- ആളുകളുടെയോ മൃഗങ്ങളുടെയോ നേരെ ലേസർ ബീം ലക്ഷ്യമിടരുത്.
- ലേസർ ബീമിലേക്ക് നേരിട്ട് കണ്ണ് എക്സ്പോഷർ ചെയ്യുന്നത് ഒഴിവാക്കുക.
- This device emits a Class 2 laser.
- ഉപകരണം കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- ഉപകരണം പരിഷ്കരിക്കാനോ ഡിസ്അസംബ്ലിംഗ് ചെയ്യാനോ ശ്രമിക്കരുത്.
- നിർദ്ദിഷ്ട ബാറ്ററികൾ മാത്രം ഉപയോഗിക്കുക.
Always operate the device in a safe manner, following all local safety regulations.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- 1 x MiLESEEY D5 Digital Laser Measure Device
- 2 x 1.5V AAA ബാറ്ററികൾ
- 1 x ഉപയോക്തൃ മാനുവൽ
- 1 x Portable Pouch Bag
- 1 x Holding Rope (Wrist Strap)

Image: MiLESEEY D5 Laser Measure Device, pouch, wrist strap, batteries, and user manual.
4. ഉൽപ്പന്നം കഴിഞ്ഞുview
The MiLESEEY D5 features a compact design with an intuitive button layout and a clear LCD display.
4.1 ഉപകരണ ലേayട്ട്

ചിത്രം: മുൻഭാഗം view of the MiLESEEY D5 device showing the laser emitter and display.
4.2 Buttons and Functions
- MEAS ബട്ടൺ: Initiates measurement, confirms selection.
- +/- ബട്ടൺ: Activates addition/subtraction mode.
- ഫംഗ്ഷൻ ബട്ടൺ: Cycles through measurement modes (distance, area, volume, Pythagorean, etc.).
- Reference Point Button: Switches measurement reference point (front/rear of device).
- UNIT ബട്ടൺ: Changes measurement units (m/ft/in/ft+in).
- CLEAR/OFF Button: Clears current measurement, long press to power off.
- നിശബ്ദ ബട്ടൺ: ശബ്ദം ഓൺ / ഓഫ് ടോഗിൾ ചെയ്യുന്നു.

ചിത്രം: വിശദമായത് view of the MiLESEEY D5's LCD screen and button interface.
4.3 എൽസിഡി ഡിസ്പ്ലേ
The 2-inch backlit LCD display shows measurement results, battery status, measurement mode, unit, and electronic angle. The backlight ensures readability even in low-light conditions.
5. സജ്ജീകരണം
5.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- ഉപകരണത്തിന്റെ പിൻഭാഗത്ത് സ്ഥിതിചെയ്യുന്ന ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
- രണ്ട് 1.5V AAA ബാറ്ററികൾ ഇടുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക (+/-).
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
6.1 പവർ ഓൺ/ഓഫ്
- പവർ ഓൺ: അമർത്തുക MEAS ബട്ടൺ ചുരുക്കത്തിൽ.
- പവർ ഓഫ്: ദീർഘനേരം അമർത്തുക ക്ലിയർ/ഓഫ് button. The device will also automatically shut down after 180 seconds of inactivity to conserve power.
6.2 Single Distance Measurement
- ഉപകരണം ഓണാക്കുക.
- Ensure the desired reference point (front or rear of the device) is selected using the Reference Point button.
- Aim the laser at the target point.
- അമർത്തുക MEAS button once. The measured distance will be displayed on the screen.
6.3 മെഷർമെന്റ് മോഡുകൾ
The MiLESEEY D5 offers various measurement functions. Press the ഫംഗ്ഷൻ ബട്ടൺ മോഡുകളിലൂടെ സൈക്കിൾ ചെയ്യാൻ.

Image: Visual representation of different measurement modes available on the device.
- തുടർച്ചയായ അളവ്: Displays real-time distance as the device moves. Press MEAS ആരംഭിക്കാൻ/നിർത്താൻ.
- ഏരിയ അളക്കൽ: Measure two sides (length and width), and the device automatically calculates the area.
- വോളിയം അളക്കൽ: Measure three sides (length, width, height), and the device automatically calculates the volume.
- Pythagorean Measurement (Indirect Measurement):
- Single Pythagorean: Measure the hypotenuse and one leg to calculate the other leg (e.g., height).
- Double Pythagorean: Measure two hypotenuses and one segment to calculate a height.
- Auto-Level: Measures the hypotenuse, and the horizontal distance and vertical height are automatically calculated using the electronic angle sensor.
- Auto-Height: Measures two hypotenuses, and the vertical height is automatically calculated.
- സങ്കലനം/കുറയ്ക്കൽ: അമർത്തുക +/- button to add or subtract measurements. Perform a measurement, then press +/-, then another measurement. The result will be displayed.

Image: The device displaying results from addition and subtraction operations.
6.4 യൂണിറ്റ് സ്വിച്ചിംഗ്
The device supports multiple units of measurement.
- ദീർഘനേരം അമർത്തുക യൂണിറ്റ് ബട്ടൺ.
- The units will cycle through meters (m), feet (ft), inches (in), and feet+inches (ft+in).
- Release the button when the desired unit is displayed.

Image: The device screen illustrating the process of switching between measurement units.
6.5 Data Records
The device can store up to 30 data records. These can be recalled for review or further calculations. Refer to the on-screen prompts or the full manual for detailed instructions on accessing and managing stored data.
7. പരിപാലനം
- വൃത്തിയാക്കൽ: ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp cloth to clean the device. Do not use harsh chemicals or abrasive cleaners.
- സംഭരണം: Store the device in its protective pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
- സംരക്ഷണം: The device has an IP54 rating, making it splash-proof and dust-proof. However, avoid submerging it in water or exposing it to heavy dust.

Image: The MiLESEEY D5 device highlighting its IP54 water and dust resistance.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഉപകരണം പവർ ഓണാക്കുന്നില്ല | കുറഞ്ഞതോ ഡെഡ് ബാറ്ററികളോ; തെറ്റായ ബാറ്ററി ഇൻസ്റ്റാളേഷൻ. | ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക; ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക. |
| Laser dot is difficult to see | Bright ambient light; long measurement distance. | Use in shaded areas or at shorter distances. Consider using a target plate. |
| കൃത്യമല്ലാത്ത അളവുകൾ | Unstable surface; laser obstructed; incorrect reference point. | Ensure stable measurement; clear laser path; verify reference point setting. |
| ഡിസ്പ്ലേയിൽ പിശക് സന്ദേശം | Measurement out of range; poor reflection surface. | Measure within specified range; use a reflective target if needed. |
9 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: മിലേസി
- മോഡൽ: D5
- അളക്കൽ ശ്രേണി: 393 അടി (120 മീറ്റർ) വരെ
- കൃത്യത: ±2 മിമി (±1/16 ഇഞ്ച്)
- Angle Sensor Accuracy: ±0.3°
- അളക്കൽ യൂണിറ്റുകൾ: m / ft / in / ft+in
- ഡിസ്പ്ലേ: 2-inch LCD with backlight
- ബാറ്ററി തരം: 2 x AAA Alkaline batteries (included)
- യാന്ത്രിക ഷട്ട്ഡൗൺ: Laser: 30s, Device: 180s
- Data Records: 30 സെറ്റുകൾ
- IP റേറ്റിംഗ്: IP54 (Splash-proof and Dust-proof)
- മെറ്റീരിയൽ: അക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡൈൻ സ്റ്റൈറൈൻ
- ഇനത്തിൻ്റെ ഭാരം: ഏകദേശം 200 ഗ്രാം (7.1 ഔൺസ്)
- ഉൽപ്പന്ന അളവുകൾ: 1.79"L x 0.98"W x 4.33"H
10. വാറൻ്റിയും പിന്തുണയും
The MiLESEEY D5 Digital Laser Measure Device comes with a 2 വർഷത്തെ വാറൻ്റി. For technical support, warranty claims, or any questions regarding the product, please contact MiLESEEY customer service through your purchase platform or the official MiLESEEY webസൈറ്റ്.





