Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 ROG Strix Active Backplate (13045) Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of the Alphacool Eisblock Aurora Acryl GPX-N Active Backplate for NVIDIA GeForce RTX 3080/3090 ROG Strix graphics cards. This active backplate is designed to enhance the cooling performance of your graphics card when used in conjunction with compatible Alphacool GPU water coolers or AIOs.

The active backplate features nickel-plated copper construction and integrated digital RGB LEDs for illumination. Proper installation is crucial for optimal performance and to prevent damage to your components.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before proceeding with installation. Failure to do so may result in personal injury or damage to your equipment.

• ഏതെങ്കിലും ഘടകങ്ങൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനോ നീക്കം ചെയ്യുന്നതിനോ മുമ്പ് നിങ്ങളുടെ കമ്പ്യൂട്ടറിൽ നിന്ന് എല്ലായ്പ്പോഴും പവർ വിച്ഛേദിക്കുക.
• Handle components with care to avoid electrostatic discharge (ESD). Use an anti-static wrist strap if available.
• Ensure all water cooling components are properly sealed and tested for leaks before powering on your system.
• Do not overtighten screws, as this can damage the components.
• Keep liquids away from electronic components during installation and operation.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact Alphacool support.

Image: Package contents including various thermal pads, mounting screws, G1/4" plugs, and an Alphacool logo.

• Alphacool Eisblock Aurora Acryl GPX-N Active Backplate
• Thermal pads (various thicknesses: 1mm, 2mm, 3mm)
• മൗണ്ടിംഗ് സ്ക്രൂകൾ (6x)
• G1/4" plugs (2x)
• Alphacool logo badge
• Digital aRGB LED cable

4 അനുയോജ്യത

This active backplate is specifically designed for NVIDIA GeForce RTX 3080/3090 ROG Strix graphics cards. It is compatible with the following Alphacool products:

• Alphacool Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers.
• Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 ROG Strix with backplate (article number: 14418).

Note: When using the MCX 2x manifold with 5/3mm tubing for Variant 2 connection, this active backplate is only compatible with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. It cannot be used in combination with Alphacool Eiswolf 2 AIOs for this specific connection method.

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps carefully to install your Alphacool Eisblock Aurora Active Backplate.

5.1. തയ്യാറാക്കൽ

1. Ensure your graphics card is removed from the PC and any existing cooling solutions are detached.
2. Clean the back of your graphics card thoroughly, removing any old thermal paste or residue.
3. Identify the correct thermal pads from the package based on their thickness and designated placement (refer to the thermal pad bags: "For Cooler 1mm NO: 1-3", "For Backplate 2mm NO: 4", "For Backplate 3mm NO: 5-6").

5.2. Thermal Pad Placement

Carefully apply the thermal pads to the designated areas on the back of your graphics card and the active backplate. Ensure good contact and coverage for optimal heat transfer.

ചിത്രം: മുൻഭാഗം view of the active backplate, showing the clear acrylic water block and RGB lighting. This side faces away from the GPU PCB.

ചിത്രം: പിൻഭാഗം view of the active backplate, illustrating the contact surface and screw holes for mounting to the graphics card.

5.3. Mounting the Backplate

1. Align the active backplate with the mounting holes on your graphics card.
2. Secure the backplate using the provided mounting screws. Tighten screws evenly in a cross pattern to ensure even pressure. Do not overtighten.

5.4. Water Loop Connection

There are two primary methods for integrating the active backplate into your existing water cooling loop:

Variant 1: G1/4" Thread Connections

• The backplate features an inlet and outlet with G1/4" internal threads on its top side.
• Use suitable G1/4" fittings and hoses/hard tubes to connect the backplate into your water circuit.
• The inlet and outlet can be freely chosen depending on your loop design.

Variant 2: 5/3mm Hose Connections (Space-Saving)

• The backplate also has an inlet and outlet on the side suitable for 5/3mm hoses.
• To use this variant, you will need Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250).
• This method is ideal for PC cases with limited space.
• Important: This variant only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. It is not compatible with Alphacool Eiswolf 2 AIOs.

After connecting the water lines, ensure all fittings are securely tightened to prevent leaks.

ചിത്രം: ഇൻസ്റ്റലേഷൻ എക്സ്ample showing the active backplate integrated into a water-cooled system, with tubing and illuminated RGB elements.

ചിത്രം: മറ്റൊന്ന് view of the active backplate installed, focusing on the illuminated water block and connections.

5.5. Digital aRGB LED Connection

The integrated digital aRGB LEDs are connected via a JST 3-pin connector. Connect this cable to a compatible digital RGB controller (e.g., Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable motherboard header. Ensure the correct pin orientation to avoid damage.

6. ഓപ്പറേഷൻ

Once installed and the water loop is filled and leak-tested, you can power on your system. The active backplate will begin cooling the rear of your GPU, contributing to lower overall temperatures.

6.1. RGB ലൈറ്റിംഗ് നിയന്ത്രണം

The digital aRGB LEDs can be controlled via your connected motherboard software or a dedicated RGB controller. Refer to your motherboard's manual or RGB controller's instructions for specific customization options, including color, effects, and brightness.

7. പരിപാലനം

Regular maintenance of your water cooling system is essential for longevity and optimal performance.

• ചോർച്ച പരിശോധനകൾ: Periodically inspect all fittings and tubing for any signs of leaks. Address any leaks immediately.
• കൂളന്റ് മാറ്റിസ്ഥാപിക്കൽ: Follow the recommendations of your coolant manufacturer for replacement intervals, typically every 6-12 months.
• വൃത്തിയാക്കൽ: Over time, coolant can leave residue. If cooling performance degrades, consider disassembling and cleaning the water block and backplate with distilled water or a specialized cleaning solution.
• പൊടി നീക്കം: Keep your PC case and radiators free of dust to maintain efficient cooling.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your active backplate, consider the following troubleshooting steps:

• മോശം കൂളിംഗ് പ്രകടനം:
  • Ensure thermal pads are correctly placed and making good contact.
  • Verify that the water pump is operating correctly and coolant is flowing.
  • Check for air bubbles trapped in the loop.
  • Confirm that the active backplate is properly integrated into the main cooling loop.
• ചോർച്ച:
  • Immediately power off your system.
  • Inspect all fittings and connections for looseness. Tighten carefully.
  • Replace any damaged O-rings or tubing.
• RGB ലൈറ്റിംഗ് പ്രവർത്തിക്കുന്നില്ല:
  • Check the JST 3-pin connector for proper connection to the motherboard or controller.
  • Ensure the motherboard header or controller is enabled and configured correctly in software.
  • Verify that the power supply to the RGB controller (if external) is connected.

If problems persist, contact Alphacool customer support for further assistance.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

Alphacool products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the official Alphacool webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക.

For technical support, product inquiries, or warranty claims, please visit the official Alphacool store or support channels:

Visit the Alphacool Store