ബ്രിട്ട അൾട്രാമാക്സ് 27-കപ്പ് വാട്ടർ ഡിസ്‌പെൻസർ യൂസർ മാനുവൽ

1. ആമുഖം

The Brita UltraMax 27-Cup Water Dispenser is designed to provide healthier, great-tasting filtered water. This BPA-free dispenser reduces the taste and odor of chlorine, and also reduces impurities such as mercury, copper, and cadmium from tap water. It features a large capacity, an easy-locking lid, and a precision-pour spigot, making it suitable for refrigerator storage and daily use.

Image 1.1: The Brita UltraMax 27-Cup Water Dispenser, including one standard filter and its packaging.

2. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. Unpack and Wash Components:

   Remove all components from the packaging. Wash the dispenser base, lid, and reservoir with mild soap and water. Rinse thoroughly and dry.

2. ഫിൽറ്റർ തയ്യാറാക്കുക:

   Submerge the new Brita Standard filter in cold water for 15 seconds. This helps remove loose carbon particles and prepares the filter for use.

   

   Image 2.1: A Brita Original filter, highlighting its ability to reduce various contaminants.

3. ഫിൽട്ടർ ചേർക്കുക:

   Insert the prepared filter into the reservoir. Press down firmly to ensure a tight seal. The filter should sit securely in the designated opening.

4. Fill the Dispenser:

   Place the reservoir into the dispenser base. Fill the reservoir with cold tap water. The water will slowly filter into the main dispenser compartment.

5. പ്രാരംഭ ഫ്ലഷ്:

   For the first two fillings, dispense and discard the filtered water. This flushes out any remaining carbon dust and primes the filter for optimal performance.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. ജലവിതരണം:

   Position a glass or container under the spigot. Push the spigot lever down to dispense filtered water. Release the lever to stop the flow.

2. വീണ്ടും പൂരിപ്പിക്കൽ:

   When the water level is low, remove the lid and refill the reservoir with cold tap water. Replace the lid securely.

   

   Image 3.1: Clear, filtered water being poured from a dispenser into a drinking glass.

4. പരിപാലനം

4.1 ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ

മികച്ച പ്രകടനത്തിനും ജലത്തിന്റെ ഗുണനിലവാരത്തിനും പതിവായി ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ നിർണായകമാണ്.

• സ്റ്റാൻഡേർഡ് ഫിൽട്ടർ: Replace every 40 gallons or approximately every two months.
• Elite Filter (if used): Replace every 120 gallons or approximately every six months.

The dispenser features a sticker filter indicator to help track when a replacement is due. Mark the date of filter installation on the sticker.

How to Replace the Filter:

1. Remove the reservoir from the dispenser base.
2. Carefully remove the old filter by pulling it upwards.
3. Prepare the new filter as described in the Setup section (submerge in cold water for 15 seconds).
4. Insert the new filter into the reservoir, pressing down firmly to ensure a secure fit.
5. Reassemble the dispenser and perform an initial flush by discarding the first two fillings of filtered water.
6. Update the filter indicator sticker with the new installation date.

Image 4.1: Diagram illustrating how the Brita filter works, including ion-exchange resin, activated carbon, and mesh screens.

4.2 ഡിസ്പെൻസർ വൃത്തിയാക്കൽ

Clean the dispenser regularly to prevent buildup and maintain hygiene.

• Disassemble the dispenser (lid, reservoir, base, spigot).
• Wash all parts (except the filter) with mild dish soap and warm water. A soft brush can be used for hard-to-reach areas.
• എല്ലാ സോപ്പ് അവശിഷ്ടങ്ങളും നീക്കം ചെയ്യാൻ നന്നായി കഴുകുക.
• വീണ്ടും കൂട്ടിച്ചേർക്കുന്നതിന് മുമ്പ് എല്ലാ ഭാഗങ്ങളും പൂർണ്ണമായും ഉണങ്ങിയതാണെന്ന് ഉറപ്പാക്കുക.

5. പ്രശ്‌നപരിഹാരം

• സ്ലോ ഫിൽട്രേഷൻ:

  If water filters slowly, the filter may be clogged or nearing the end of its lifespan. Try removing and reinserting the filter to ensure a proper seal. If the issue persists, replace the filter.

• Leaking Spigot:

  Ensure the spigot is properly tightened and that any rubber seals are correctly seated. Sometimes, a gentle closing of the spigot may not fully engage the internal valve. Try allowing the spigot lever to 'snap' back into place to ensure a complete seal. If leaking continues, check for damage to the spigot or seals.

• വെള്ളത്തിന്റെ രുചി/ഗന്ധ പ്രശ്നങ്ങൾ:

  If the filtered water does not taste fresh or has an unusual odor, the filter may need replacement. Ensure the filter was properly prepared and installed. Always perform the initial flush after installing a new filter.

6 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 6.1: ഡൈമൻഷണൽ ഓവർview of the Brita UltraMax 27-Cup Water Dispenser.

7. വാറൻ്റിയും പിന്തുണയും

വാറന്റി വിവരങ്ങൾക്കോ ​​ഉൽപ്പന്ന പിന്തുണയ്ക്കോ, ദയവായി ഔദ്യോഗിക ബ്രിട്ടാ കാണുക website or contact Brita customer service directly. Details regarding specific warranty terms and conditions are typically provided with the product packaging or available online.

Ensure you use genuine Brita filters for optimal performance and to maintain any applicable warranty. Brita products and filters are certified by the Water Quality Association and meet NSF/ANSI standards for contaminant reduction.

Image 7.1: Brita certifications highlighting compliance with Water Quality Association and NSF/ANSI standards.