Absima CR4S V2 2.4Ghz Radio System

1. ആമുഖം

വാങ്ങിയതിന് നന്ദി.asing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.

2. സുരക്ഷാ മുൻകരുതലുകൾ

• Always operate your RC vehicle in a safe and responsible manner.
• Ensure batteries are correctly installed and charged before use.
• Do not expose the radio system to water or extreme temperatures.
• Keep the system away from small children to prevent accidental ingestion of small parts.
• Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.

3. പാക്കേജ് ഉള്ളടക്കം

The Absima CR4S V2 2.4Ghz Radio System package includes the following components:

• Absima CR4S V2 2.4Ghz Transmitter (TX)
• Absima 2.4Ghz Receiver (RX)

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the main components of your Absima CR4S V2 radio system.

Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).

ചിത്രം 4.2: വിശദമായി view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.

4.1 ട്രാൻസ്മിറ്റർ (ടിഎക്സ്)

• സ്റ്റിയറിംഗ് വീൽ: Controls the left and right steering of the vehicle.
• ത്രോട്ടിൽ ട്രിഗർ: Controls forward and reverse movement. Pull for forward, push for reverse/brake.
• CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
• ട്രിം ക്രമീകരണങ്ങൾ: Dials or sliders for fine-tuning steering and throttle neutral positions.
• വൈദ്യുതി സ്വിച്ച്: ട്രാൻസ്മിറ്റർ ഓൺ/ഓഫ് ചെയ്യുന്നു.
• ബാറ്ററി കമ്പാർട്ട്മെൻ്റ്: Located at the bottom of the handle, for installing alkaline batteries.

4.2 റിസീവർ (RX)

• ആൻ്റിന: Receives signals from the transmitter. Ensure it is properly positioned.
• Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
• ബാൻഡ് ബട്ടൺ: Used to pair the receiver with the transmitter.

5. സജ്ജീകരണം

5.1 ട്രാൻസ്മിറ്റർ ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. കവർ തുറക്കുക.
3. Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

5.2 Receiver Installation and Connection

1. Mount the receiver securely in your RC vehicle, away from electrical interference.
2. Connect the steering servo to the "CH1" port on the receiver.
3. Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
4. Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
5. Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.

5.3 ട്രാൻസ്മിറ്ററും റിസീവറും ബന്ധിപ്പിക്കൽ

Binding is the process of linking the transmitter and receiver so they communicate exclusively with each other.

1. Ensure the transmitter is turned OFF.
2. Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
3. Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
4. While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
5. Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
6. Turn off the receiver, then the transmitter.
7. റിസീവറിൽ നിന്ന് ബൈൻഡ് പ്ലഗ് നീക്കംചെയ്യുക.
8. Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.

6. പ്രവർത്തിക്കുന്നു

6.1 Power On/Off Sequence

• പവർ ഓണാക്കാൻ: Turn on the transmitter first, then power on your RC vehicle (receiver).
• പവർ ഓഫ് ചെയ്യാൻ: Power off your RC vehicle (receiver) first, then turn off the transmitter.

6.2 അടിസ്ഥാന നിയന്ത്രണങ്ങൾ

• സ്റ്റിയറിംഗ്: Rotate the steering wheel left or right to control the direction of your vehicle.
• ത്രോട്ടിൽ: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
• Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.

6.3 തുടക്കക്കാരൻ മോഡ്

The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.

7. പരിപാലനം

• Keep the transmitter and receiver clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
• Avoid exposing the system to direct sunlight or high humidity for extended periods.
• Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage.
• Regularly check all connections for security and wear.

8. പ്രശ്‌നപരിഹാരം

9 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ നമ്പർ: 2000010
• ചാനലുകൾ: 4
• ആവൃത്തി: 2.4 GHz
• ട്രാൻസ്മിറ്റർ അളവുകൾ: ഏകദേശം 9 x 2 x 36 സെ.മീ
• ഭാരം: Approximately 130 g (Transmitter only, without batteries)
• മെറ്റീരിയൽ: പ്ലാസ്റ്റിക്
• നിറം: കറുപ്പ്
• Batteries Required (Transmitter): Yes (Alkaline, not included)
• അസംബ്ലി ആവശ്യമാണ്: ഇല്ല

10. വാറൻ്റി

Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima webസൈറ്റ്.

11. പിന്തുണ

For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.