SmallRig AD-01 Video Tripod Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The SmallRig AD-01 Video Tripod is a heavy-duty, professional aluminum double-tube tripod designed for DSLR cameras, camcorders, and other camera equipment. It features a 360-degree fluid head, a dual-mode quick-release plate, and adjustable height for versatile shooting scenarios. This manual provides essential information for the proper setup, operation, and maintenance of your AD-01 Video Tripod.

Figure 1.1: SmallRig AD-01 Video Tripod with included carrying bag.

2. ഘടകങ്ങളും പാക്കേജ് ഉള്ളടക്കങ്ങളും

അസംബ്ലി ചെയ്യുന്നതിനുമുമ്പ്, താഴെ പട്ടികപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 1 x Heavy-duty Fluid Head Tripod
• 1 x ചുമക്കുന്ന ബാഗ്
• 1 x Quick Release Plate (for MFT)
• 1 x 1/4''-20 Screw
• 1 x 3/8''-16 Screw
• 1 x ഉപയോക്തൃ മാനുവൽ

ചിത്രം 2.1: ഉൽപ്പന്ന പാക്കേജിൽ ഉൾപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഇനങ്ങളും.

Key parts of the tripod include:

• ഫ്ലൂയിഡ് ഹെഡ്
• High Strength Aluminum Legs
• Flip Locking System
• വഴുക്കാത്ത റബ്ബർ പാദങ്ങൾ
• Aluminum Alloy Central Stabilization System
• Tripod Locking Block

ചിത്രം 2.2: വിശദമായി view of the tripod's main components.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

3.1 Attaching the Fluid Head

The fluid head comes pre-attached to the tripod legs. Ensure it is securely fastened before use.

3.2 Adjusting Tripod Height

To adjust the height of the tripod legs, open the flip locking system on each leg section. Extend the legs to the desired height and firmly close the flip locks to secure them. The tripod can be adjusted from 85cm (33 inches) to 186cm (73 inches).

Figure 3.1: The tripod's adjustable height range and flip locking system.

3.3 Mounting Your Camera

The fluid head features a dual-mode quick-release plate system. The included quick-release plate is compatible with MFT (Micro Four Thirds) systems and can be installed in both directions. For DJI RS 2/RS3/RS3 Pro compatibility, a separate quick-release plate (not included) is required.

1. Locate the quick-release plate on the fluid head.
2. Press the side quick release button to unlock and remove the plate.
3. Attach your camera to the quick-release plate using the appropriate 1/4''-20 or 3/8''-16 screw. Ensure the camera is securely fastened.
4. Slide the quick-release plate with the camera back into the fluid head until it clicks into place. Use the quick release plate fixing knob for additional security.

Figure 3.2: Fluid head controls including quick release mechanism and adjustment knobs.

Figure 3.3: Quick disassembly and mode switching of the quick release plate.

Figure 3.4: Quick release plate compatibility and built-in Allen wrench.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 Fluid Head Movement

The professional fluid head features a built-in damping and balancing system for smooth camera movements. It supports 360° horizontal panning and +90°/-60° vertical tilting. Use the horizontal adjustment knob and vertical adjustment knob to control the resistance and lock the head in position.

Figure 4.1: Demonstrating the 360-degree panning and tilt range of the fluid head.

4.2 ട്രൈപോഡ് നിരപ്പാക്കൽ

The fluid head includes a built-in bubble level to assist in achieving a perfectly level setup. Adjust the tripod legs until the bubble is centered within the indicator.

4.3 Payload Capacity

The SmallRig AD-01 Video Tripod is designed to support a maximum load of 8KG (17LBS), providing stable support for various camera setups.

5. പരിപാലനം

To ensure the longevity and optimal performance of your SmallRig AD-01 Video Tripod, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: ഓരോ ഉപയോഗത്തിനു ശേഷവും പൊടിയും അവശിഷ്ടങ്ങളും നീക്കം ചെയ്യാൻ മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് ട്രൈപോഡ് തുടയ്ക്കുക. കഠിനമായ അഴുക്കിന്, അല്പം ഡി-ക്ലിപ്പർ ഉപയോഗിക്കുക.amp തുണി ഉപയോഗിച്ച് നന്നായി ഉണക്കുക. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഒഴിവാക്കുക.
• ലൂബ്രിക്കേഷൻ: The fluid head is designed for smooth operation and typically does not require user lubrication. If you notice any stiffness, consult SmallRig support.
• സംഭരണം: Store the tripod in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged before storage to prevent stress on the mechanisms.
• പരിശോധന: Periodically check all screws, knobs, and leg locks for tightness. Tighten any loose components to maintain stability.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your SmallRig AD-01 Video Tripod.

6.1 ട്രൈപോഡ് അസ്ഥിരത

• ഇഷ്യൂ: Tripod feels wobbly or unstable.
• പരിഹാരം: Ensure all leg sections are fully extended and their flip locks are securely closed. Verify that the tripod is placed on a flat, stable surface. Check the tightness of the central stabilization system.

6.2 Stiff Fluid Head Movement

• ഇഷ്യൂ: Panning or tilting movements are not smooth.
• പരിഹാരം: Ensure the horizontal and vertical adjustment knobs are not overtightened. Loosen them slightly to achieve desired fluidity. If the issue persists, ensure no debris is obstructing the head's movement.

6.3 Quick Release Plate Not Securing

• ഇഷ്യൂ: The quick release plate does not lock into the fluid head.
• പരിഹാരം: Ensure the side quick release button is fully depressed when inserting the plate. Make sure the plate is inserted in the correct orientation. Check for any obstructions or damage to the plate or the head's receiver.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, please refer to the warranty card included with your product or visit the official SmallRig website. SmallRig offers protection plans for extended coverage, which can be purchased separately.

If you encounter any issues or require technical assistance, please contact SmallRig customer support through their official channels. Provide your product model number (3751-SS) and a detailed description of the issue for faster service.