1. ആമുഖം
This manual provides essential information for the safe and efficient operation of your ANZZI Envo Electric Tankless Water Heater, Model WH-AZ027-M3. Please read all instructions carefully before installation and use. Retain this manual for future reference.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The ANZZI Envo Electric Tankless Water Heater is designed to provide on-demand hot water, eliminating the need for a traditional storage tank. Its compact design allows for installation in various locations, saving valuable space.
ചിത്രം 1: മുൻഭാഗം view of the ANZZI Envo Electric Tankless Water Heater, showing the digital display and control buttons.
പ്രധാന സവിശേഷതകൾ
- ടാങ്കില്ലാത്ത ഡിസൈൻ: Saves space and provides continuous hot water.
- Water/Electric Separation: Ensures safety by isolating the flowing water from the electrical system.
- LED ഡിസ്പ്ലേ: Provides real-time temperature readings and allows for easy temperature adjustment.
- അമിത ചൂടാക്കൽ സംരക്ഷണം: Integrated safety feature to prevent overheating.
- ഒതുക്കമുള്ള വലിപ്പം: Dimensions of 10.24"W x 15.16"H allow for flexible installation.
Figure 2: Visual comparison illustrating the compact size of the ANZZI Envo tankless water heater compared to a traditional tank water heater, highlighting its space-saving benefit.
2 സുരക്ഷാ വിവരങ്ങൾ
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read these instructions thoroughly before installing or servicing this equipment.
- This appliance must be installed by a qualified electrician and plumber in accordance with all national and local electrical and plumbing codes.
- Ensure the main power supply is disconnected before performing any installation or maintenance.
- Do not operate this water heater if any part of it has been submerged in water.
- Do not block or obstruct the flow of water into or out of the unit.
- Maintain proper clearances around the unit as specified in the installation section.
- The water heater is designed for indoor use only.
- പൊള്ളൽ തടയാൻ ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും ജലത്തിന്റെ താപനില പരിശോധിക്കുക.
3 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | ആൻസി |
| മോഡൽ നമ്പർ | WH-AZ027-M3 |
| വാട്ട്tage | 27000 വാട്ട്സ് (27 kW) |
| വാല്യംtage | 240 വോൾട്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 10.24"ആംശം x 15.16"ആംശം |
| ഇനത്തിൻ്റെ ഭാരം | 18.19 പൗണ്ട് |
| പ്രത്യേക സവിശേഷതകൾ | LED Display, Overheat Protection |
| മൗണ്ടിംഗ് തരം | മതിൽ |
| കാര്യക്ഷമത | ഉയർന്ന കാര്യക്ഷമതയുള്ളത് |
| സർട്ടിഫിക്കേഷൻ | ETL |
| യു.പി.സി | 191042063433 |
Figure 3: Dimensions of the ANZZI Envo Electric Tankless Water Heater, showing a width of 10.2 inches and a height of 15.1 inches.
4. ഇൻസ്റ്റലേഷൻ
Installation of this tankless water heater requires professional expertise. It is strongly recommended that a licensed electrician and plumber perform the installation to ensure compliance with all applicable codes and safety standards.
4.1 ഇലക്ട്രിക്കൽ ആവശ്യകതകൾ
The ANZZI Envo 27kW model requires significant electrical capacity. Ensure your electrical panel can support the unit's demands.
- വാല്യംtage: 240 വോൾട്ട്
- പരമാവധി നിലവിലെ ഡ്രോ: 112.5 Amps
- Required Breakers: 3 x 40 Amp Double Pole Breakers
- Required Wire (AWG): 3x8 AWG
- Minimum Panel Capacity: 200 Amps or more is recommended.
Figure 4: Diagram detailing the electrical requirements for the ANZZI Envo 27kW model, including breaker and wire specifications. Professional installation is recommended.
4.2 Plumbing Requirements
- Install the unit vertically with water connections at the bottom.
- Ensure proper water pressure and flow rate are available at the installation site.
- The unit features water/electric separation for enhanced safety.
- All fittings are designed with O-rings to minimize potential leaks.
ചിത്രം 5: താഴെ view of the ANZZI Envo water heater, illustrating the inlet and outlet water connections.
ചിത്രം 6: ഉദാample installation diagram showing the ANZZI Envo water heater mounted on a wall in a utility area, serving a bathroom above.
4.3 Sizing and Capacity
The performance of a tankless water heater is dependent on the incoming water temperature and desired flow rate. Refer to the chart below to determine the appropriate model for your climate and usage needs.
Figure 7: Sizing chart for ANZZI Envo tankless water heaters, correlating regional inlet water temperatures with flow rates (GPM) and approximate fixture usage for different models.
The 27kW model is suitable for higher demand applications, but actual performance will vary based on your specific inlet water temperature and simultaneous hot water usage.
5. Setup and Operating Instructions
5.1 പ്രാരംഭ സജ്ജീകരണം
- After plumbing and electrical connections are complete and verified by a professional, ensure all water valves are open.
- Purge air from the system by opening all hot water faucets in your home until water flows smoothly without sputtering.
- സർക്യൂട്ട് ബ്രേക്കറിലെ യൂണിറ്റിലേക്കുള്ള വൈദ്യുതി പവർ ഓണാക്കുക.
- The unit's LED display should illuminate.
5.2 Operating the Unit
The ANZZI Envo features an intuitive LED display for temperature control.
- പവർ ബട്ടൺ: പവർ ബട്ടൺ അമർത്തുക (⏻) യൂണിറ്റ് ഓണാക്കാനോ ഓഫാക്കാനോ.
- താപനില ക്രമീകരണം: അപ്പ് ഉപയോഗിക്കുക (▲) താഴേക്ക് (▼) arrow buttons to set your desired water temperature. The display will show the set temperature.
- തത്സമയ പ്രദർശനം: The LED screen will show the current water temperature as it heats.
Figure 8: Close-up of the ANZZI Envo control panel, showing the digital temperature display and adjustment buttons.
The unit provides instant and continuous hot water as long as the flow rate and inlet temperature are within its operational capacity.
Figure 9: Illustration of how cold water enters the unit and is instantly heated, then exits as continuous hot water, demonstrating the tankless operation.
6. പരിപാലനം
നിങ്ങളുടെ ടാങ്കില്ലാത്ത വാട്ടർ ഹീറ്ററിന്റെ ദീർഘായുസ്സും കാര്യക്ഷമമായ പ്രവർത്തനവും ഉറപ്പാക്കാൻ പതിവ് അറ്റകുറ്റപ്പണികൾ സഹായിക്കുന്നു.
- വാർഷിക ഫ്ലഷിംഗ്: It is recommended to flush the unit annually to remove mineral buildup, especially in areas with hard water. Consult a qualified plumber for this service.
- കണക്ഷനുകൾ പരിശോധിക്കുക: Periodically check all water and electrical connections for any signs of leaks or corrosion. Address any issues promptly.
- വൃത്തിയുള്ള പുറം: ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് യൂണിറ്റിൻ്റെ പുറംഭാഗം തുടയ്ക്കുകamp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
- Filter Cleaning (if applicable): Some models may have an inlet filter. Refer to specific instructions for cleaning or replacing it if present.
7. പ്രശ്നപരിഹാരം
Before attempting any troubleshooting, ensure the power supply to the unit is disconnected at the circuit breaker.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No hot water / Unit not turning on | No power, tripped breaker, insufficient water flow. | Check circuit breakers. Ensure adequate water flow (minimum activation flow rate). Verify electrical connections. |
| വെള്ളം ആവശ്യത്തിന് ചൂടില്ല | Inlet water too cold, flow rate too high, temperature setting too low, mineral buildup. | Reduce water flow. Increase temperature setting. Consider professional descaling if mineral buildup is suspected. Refer to sizing chart (Figure 7). |
| ജലത്തിന്റെ താപനിലയിൽ ഏറ്റക്കുറച്ചിലുകൾ | Inconsistent water pressure, air in the system, multiple hot water demands. | Check water pressure. Purge air from the system. Avoid excessive simultaneous hot water usage. |
| ചോർച്ച | Loose connections, damaged O-rings, internal component failure. | Immediately turn off water supply and power. Tighten connections. Contact a qualified plumber for repair. |
For issues not resolved by the above steps, or for any complex repairs, contact a qualified technician or ANZZI customer support.
8. വാറൻ്റിയും പിന്തുണയും
വാറൻ്റി വിവരങ്ങൾ
The ANZZI Envo Electric Tankless Water Heater comes with a പരിമിതമായ ആജീവനാന്ത വാറൻ്റി. This warranty covers defects in materials and workmanship under normal use and service. Please refer to the warranty card included with your product for full terms and conditions, or visit the ANZZI webവിശദാംശങ്ങൾക്ക് സൈറ്റ്.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, parts, or warranty claims, please contact ANZZI customer support. Have your model number (WH-AZ027-M3) and purchase date available when contacting support.
Contact information for ANZZI can typically be found on their official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ.
