GODEER B09YTVGSJ8

ഗോഡീർ ക്വീൻ സൈസ് പ്ലാറ്റ്‌ഫോം ബെഡ് യൂസർ മാനുവൽ

Model: B09YTVGSJ8

ബ്രാൻഡ്: ഗോഡീർ

ആമുഖം

Thank you for choosing the GODEER Queen Size Platform Bed. This bed frame features a modern design with an upholstered faux leather finish, a convenient hydraulic storage system, and an integrated LED light headboard. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new bed. Please read this manual thoroughly before assembly and use, and retain it for future reference.

സുരക്ഷാ വിവരങ്ങൾ

ഉൽപ്പന്നത്തിന് പരിക്കേൽക്കുകയോ കേടുപാടുകൾ സംഭവിക്കുകയോ ചെയ്യാതിരിക്കാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക:

പാക്കേജ് ഉള്ളടക്കം

അസംബ്ലി ചെയ്യുന്നതിനുമുമ്പ്, താഴെ പട്ടികപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക:

അസംബ്ലി നിർദ്ദേശങ്ങൾ

Please follow these steps carefully for proper assembly. Two people are recommended for assembly.

ഘട്ടം 1: ഭാഗങ്ങൾ അൺപാക്ക് ചെയ്ത് തിരിച്ചറിയുക

Carefully unpack all components and lay them out on a soft, clean surface. Refer to the parts list to identify each piece. The overall dimensions of the assembled bed are approximately 88.6"L x 65.7"W x 26.6"H.

Diagram showing the dimensions of the assembled bed frame, including length, width, and headboard height.

Image: Overall dimensions of the GODEER Queen Size Platform Bed.

ഘട്ടം 2: ബെഡ് ഫ്രെയിം കൂട്ടിച്ചേർക്കുക

Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure. The faux leather upholstery provides a sleek black finish.

Step 3: Install the Center Support Beam

Secure the center support beam to the designated points on the headboard and footboard. This beam provides crucial support for the mattress and slats.

Step 4: Attach the Hydraulic Lift Mechanism

Mount the two hydraulic lift mechanisms to the bed frame according to the pre-drilled holes. Ensure they are oriented correctly and securely fastened. These mechanisms allow for easy lifting of the mattress platform.

ക്ലോസ് അപ്പ് view of the hydraulic lift mechanism attached to the bed frame, showing the piston and pivot points.

ചിത്രം: വിശദമായത് view of the hydraulic lift mechanism.

Step 5: Install the Wooden Slats

Insert the wooden slats into the plastic caps and attach them to the side rails and center support beam. Distribute the slats evenly across the frame. The slatted frame is designed for high load capacity, up to 500 LBS.

View of the wooden slats installed on the bed frame, showing the even spacing and plastic caps.

Image: Installation of wooden slats on the bed frame.

Step 6: Connect LED Lights

Connect the LED light strip cable from the headboard to the power adapter. Plug the adapter into a standard wall outlet. The LED lights offer 16 color options and 4 automatic changing modes.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Operating the LED Light Headboard

The LED lights are controlled by the included 24-button remote control. Ensure the power adapter is plugged in.

The bed frame with the LED light strip in the headboard illuminated in a blue color.

Image: Headboard with LED lights illuminated.

ക്ലോസ് അപ്പ് view of the LED light strip embedded in the headboard, showing the light source.

Image: Close-up of the LED light strip.

Using the Hydraulic Storage System

The hydraulic storage system allows you to easily lift the mattress platform to access the large storage box underneath the bed. This creates extra space for your bedroom.

The bed frame with the mattress platform lifted by the hydraulic system, revealing the storage space underneath filled with bedding.

Image: Bed with hydraulic storage system open.

മെയിൻ്റനൻസ്

Proper care will extend the life and appearance of your bed frame:

ട്രബിൾഷൂട്ടിംഗ്

If you encounter any issues with your bed frame, refer to the following table for common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
കിടക്കയുടെ ഫ്രെയിം ഇളകുകയോ ഞരങ്ങുകയോ ചെയ്യുന്നു.അയഞ്ഞ ഹാർഡ്‌വെയർ.എല്ലാ സ്ക്രൂകളും ബോൾട്ടുകളും പരിശോധിച്ച് ശക്തമാക്കുക.
എൽഇഡി ലൈറ്റുകൾ കത്തുന്നില്ല.Power adapter unplugged; remote battery dead; loose connection.Ensure power adapter is securely plugged in. Replace remote battery. Check all cable connections.
Hydraulic lift difficult to open/close or does not stay open.Mattress too heavy/light; obstruction; hydraulic mechanism issue.Ensure mattress thickness is 6"-8". Check for obstructions. If issue persists, contact customer support.
സ്ലേറ്റുകൾ വീഴുന്നു.Slats not properly seated in plastic caps; caps damaged.Ensure each slat is fully inserted into its plastic cap. Check caps for damage and replace if necessary.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർസ്പെസിഫിക്കേഷൻ
ഉൽപ്പന്ന തരംപ്ലാറ്റ്ഫോം ബെഡ് ഫ്രെയിം
വലിപ്പംരാജ്ഞി
നിറംകറുപ്പ്
മെറ്റീരിയൽFaux Leather Upholstery, Metal, Wood
ഉൽപ്പന്ന അളവുകൾ (L x W x H)88.6" x 65.7" x 26.6"
പരമാവധി ഭാരം ശുപാർശ500 പൗണ്ട്
ശുപാർശ ചെയ്യുന്ന മെത്തയുടെ കനം6" - 8"
LED ലൈറ്റ് സവിശേഷതകൾ16 Colors, 4 Automatic Modes, Remote Control
പ്രത്യേക സവിശേഷതകൾHydraulic Storage System, LED Light Headboard
ASINB09YTVGSJ8
യു.പി.സി766640879245

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact GODEER customer service. Have your product model number (B09YTVGSJ8) and purchase date ready when contacting support. You can typically find contact information on the packaging or the retailer's webനിങ്ങൾ ഉൽപ്പന്നം വാങ്ങിയ സൈറ്റ്.

അനുബന്ധ രേഖകൾ - B09YTVGSJ8

പ്രീview GODEER 748F മേലാപ്പ് ബെഡ് ഫ്രെയിം അസംബ്ലി നിർദ്ദേശങ്ങൾ
Comprehensive assembly instructions for the GODEER 748F canopy bed frame. This guide includes a detailed parts list, step-by-step assembly procedures with textual descriptions of diagrams, warranty information, and important notes for safe and correct installation.
പ്രീview GODEER BF-035D-LXLWH വൈറ്റ് ട്വിൻ ഓവർ ട്വിൻ ബങ്ക് ബെഡ് അസംബ്ലി നിർദ്ദേശങ്ങൾ
സുരക്ഷിതവും ശരിയായതുമായ സജ്ജീകരണത്തിനായുള്ള ഭാഗങ്ങളുടെ പട്ടികയും ഘട്ടം ഘട്ടമായുള്ള മാർഗ്ഗനിർദ്ദേശവും ഉൾപ്പെടെ, GODEER BF-035D-LXLWH വൈറ്റ് ട്വിൻ ഓവർ ട്വിൻ ബങ്ക് ബെഡിനായുള്ള വിശദമായ അസംബ്ലി നിർദ്ദേശങ്ങൾ.
പ്രീview ഗോഡീർ ബ്ലാക്ക് ഹെവി ഡ്യൂട്ടി ട്വിൻ ഓവർ ഫുൾ മെറ്റൽ ബങ്ക് ബെഡ് അസംബ്ലി നിർദ്ദേശങ്ങൾ
ഫുൾ മെറ്റൽ ബങ്ക് ബെഡിന് മുകളിലുള്ള GODEER ബ്ലാക്ക് ഹെവി ഡ്യൂട്ടി ട്വിനിനുള്ള അസംബ്ലി നിർദ്ദേശങ്ങൾ, ഭാഗങ്ങളുടെ പട്ടിക, ഹാർഡ്‌വെയർ, ഘട്ടം ഘട്ടമായുള്ള മാർഗ്ഗനിർദ്ദേശം എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview GODEER 748E മേലാപ്പ് ബെഡ് അസംബ്ലി നിർദ്ദേശങ്ങൾ
GODEER 748E കനോപ്പി ബെഡിനായുള്ള വിശദമായ അസംബ്ലി നിർദ്ദേശങ്ങൾ, ഭാഗങ്ങളുടെ പട്ടിക, ഘട്ടം ഘട്ടമായുള്ള മാർഗ്ഗനിർദ്ദേശം, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു. ഉറപ്പുള്ളതും സുരക്ഷിതവുമായ ഒരു കനോപ്പി ബെഡിനായി ശരിയായ അസംബ്ലി ഉറപ്പാക്കുക.
പ്രീview WF290264 ഫുൾ സൈസ് മെറ്റൽ പ്ലാറ്റ്‌ഫോം ബെഡ് ഫ്രെയിം അസംബ്ലി നിർദ്ദേശങ്ങൾ
WF290264 ഫുൾ സൈസ് മെറ്റൽ പ്ലാറ്റ്‌ഫോം ബെഡ് ഫ്രെയിമിനായുള്ള സമഗ്രമായ അസംബ്ലി നിർദ്ദേശങ്ങൾ ഈ പ്രമാണം നൽകുന്നു. ശരിയായ നിർമ്മാണം സുഗമമാക്കുന്നതിന് വിശദമായ പാർട്‌സ് ലിസ്റ്റ്, ഹാർഡ്‌വെയർ ലിസ്റ്റ്, ഘട്ടം ഘട്ടമായുള്ള വിഷ്വൽ ഗൈഡുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview Assembly Instructions: Full Bed WF192974
Detailed assembly guide for the Full Bed model WF192974, including a comprehensive parts list, hardware list, and step-by-step instructions with textual descriptions of diagrams. Ensure correct assembly for optimal use and safety.