MZHOU MZHOU M 2

MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier User Manual

Model: MZHOU M 2

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier expansion card. This product is designed to expand your PC's storage capabilities by converting an M.2 (A+E Key) slot into two standard SATA 6G interfaces, allowing for the connection of additional SSDs or mechanical hard drives.

Utilizing PCIe 3.0 bandwidth, this expansion card offers significantly faster data transmission speeds compared to PCIe 2.0, ensuring high performance and reliability for your storage solutions.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier is a compact and efficient solution for expanding SATA connectivity. It features two standard SATA ports, enabling simultaneous connection of two SATA-interface SSDs or HDDs. The card is built around the JMB582 chip, known for its stable performance and high-speed data handling.

Close-up diagram illustrating the M.2(A+E KEY) connector and the two SATAIII ports on the MZHOU expansion card.

Figure 2.1: M.2(A+E Key) Connector and SATAIII Ports

The card's compact design, measuring approximately 30mm x 23mm, allows for easy integration into various systems.

Diagram showing the MZHOU M.2 SATA card's dimensions (30mm x 23mm) and highlighting its PCIe 3.0 bus bandwidth.

Figure 2.2: Card Dimensions and PCIe 3.0 Bandwidth

3. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

  • 1 x M.2(A+E Key) to 2-port SATA Card
  • 2 x SATA കേബിളുകൾ
  • 1 x M.2 സ്ക്രൂ
Image displaying the package contents: one M.2(A+E Key) to 2-port SATA card, two SATA cables, and one M.2 screw.

ചിത്രം 3.1: ഉൾപ്പെടുത്തിയ പാക്കേജ് ഉള്ളടക്കങ്ങൾ

4. സിസ്റ്റം ആവശ്യകതകൾ

The MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier is compatible with the following operating systems:

  • Windows 7 (X86 / X64)
  • Windows 8 / 8.x / 10 (X86 / X64) (Windows built-in driver)
  • Linux based operating system
Image detailing system requirements for the MZHOU M.2 SATA card, including Windows 7, 8, 10, and Linux operating systems.

Figure 4.1: Compatible Operating Systems

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install the MZHOU M.2 SATA expansion card into your system:

  1. പവർ ഓഫ് സിസ്റ്റം: Ensure your computer is completely powered off and unplugged from the power source before beginning installation.
  2. കമ്പ്യൂട്ടർ കേസ് തുറക്കുക: Carefully open your computer's case to access the motherboard.
  3. Locate M.2 (A+E Key) Slot: Identify an available M.2 (A+E Key) slot on your motherboard. Refer to your motherboard's manual if you are unsure of the location.
  4. SATA കേബിളുകൾ ബന്ധിപ്പിക്കുക: It is recommended to connect the SATA data cables to the expansion card മുമ്പ് mounting the card to the motherboard. This can prevent potential damage due to the card's flexible nature.
  5. Insert Expansion Card: Gently insert the M.2(A+E Key) expansion card into the M.2 slot at a slight angle. Once seated, push down the card and secure it with the provided M.2 screw.
  6. ഡ്രൈവുകൾ ബന്ധിപ്പിക്കുക: Connect the other end of the SATA data cables to your SSDs or mechanical hard drives. Ensure your drives also have power connected from your power supply unit.
  7. കെയ്‌സ് അടച്ച് പവർ ഓണാക്കുക: Close your computer case, plug in the power cord, and power on your system.
MZHOU M.2 SATA card installed in a motherboard's M.2 slot with two red SATA data cables connected.

Figure 5.1: Card Installed with SATA Cables

The card is designed to be driver-free for most modern operating systems, utilizing built-in drivers for seamless integration.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed, the MZHOU M.2 SATA expansion card will function as an extension of your motherboard's SATA capabilities. Connected drives should be detected automatically by your operating system.

  • Drive Detection: After booting your system, verify that the newly connected drives are recognized in your operating system's Disk Management (Windows) or Disk Utility (Linux) tools.
  • Formatting/Partitioning: If you are using new drives, you may need to initialize, format, and partition them before they can be used for storage.
  • ഡാറ്റ കൈമാറ്റം: You can now transfer data to and from the connected drives at high speeds, leveraging the PCIe 3.0 bandwidth.

7. പരിപാലനം

The MZHOU M.2 SATA expansion card requires minimal maintenance. To ensure optimal performance and longevity:

  • വൃത്തിയായി സൂക്ഷിക്കു: Periodically inspect your computer's interior for dust accumulation, especially around expansion cards and cooling components. Use compressed air to gently remove dust.
  • ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക: When handling the card, avoid touching the gold contacts or electronic components directly. Always hold it by the edges.
  • സുരക്ഷിത ഇൻസ്റ്റാളേഷൻ: Ensure the card remains securely fastened in its M.2 slot to prevent accidental disconnections or damage.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your MZHOU M.2 SATA expansion card, consider the following troubleshooting steps:

  • കാർഡ് കണ്ടെത്തിയില്ല:
    • Ensure the card is fully seated in the M.2 (A+E Key) slot.
    • Verify that your motherboard's M.2 slot supports A+E Key type.
    • Check your motherboard's BIOS/UEFI settings to ensure the M.2 slot is enabled and configured correctly.
  • കണ്ടെത്തിയിട്ടില്ലാത്ത ഡ്രൈവുകൾ:
    • Confirm that the SATA data cables are securely connected to both the expansion card and the drives.
    • Ensure the drives are receiving adequate power from your power supply.
    • Check Disk Management (Windows) or Disk Utility (Linux) to see if the drives appear as uninitialized or unformatted.
  • POST Issues / System Instability:
    • Some users have reported POST issues after reboot or shutdown. Check the manufacturer's website for potential firmware updates for the JMB582 chip. Updating firmware may require temporarily disabling driver signature enforcement on Windows.
    • Ensure your motherboard's BIOS is up to date.
  • Drives Appear as Removable Storage:
    • This is a known characteristic for some M.2 to SATA adapters and typically does not affect functionality. It can usually be ignored.

9 സ്പെസിഫിക്കേഷനുകൾ

പരാമീറ്റർ മൂല്യം
മോഡൽ നമ്പർ MZHOU M 2
ഹാർഡ്‌വെയർ ഇന്റർഫേസ് PCI Express (M.2 A+E Key)
ഔട്ട്പുട്ട് പോർട്ടുകൾ 2 x SATA 3.0 (6Gbps)
ചിപ്സെറ്റ് JMB582
അനുയോജ്യമായ ഉപകരണങ്ങൾ പേഴ്സണൽ കമ്പ്യൂട്ടർ
ഇനത്തിൻ്റെ ഭാരം 0.01 കിലോഗ്രാം (0.35 ഔൺസ്)
പാക്കേജ് അളവുകൾ 4.96 x 2.83 x 1.38 ഇഞ്ച്

10. അപേക്ഷയുടെ വ്യാപ്തി

This M.2 SATA expansion card is versatile and can be widely used in various computing environments:

  • പിസി കമ്പ്യൂട്ടറുകൾ
  • സെർവറുകൾ
  • വ്യാവസായിക കമ്പ്യൂട്ടറുകൾ
  • Consumer Electronic Equipment
  • സംഭരണ ​​ഉപകരണങ്ങൾ
  • NVR/DVR Systems
Diagram showing the MZHOU M.2 SATA card's application in PC computers, servers, industrial computers, consumer electronics, and storage systems.

ചിത്രം 10.1: വൈവിധ്യമാർന്ന ആപ്ലിക്കേഷനുകൾ

11. പിന്തുണാ വിവരങ്ങൾ

For technical support or inquiries, please contact the manufacturer:

  • നിർമ്മാതാവ്: Meizhou Technology (Shenzhen) Co., Ltd
  • വിലാസം: Room1002, Shangmei Times Plaza Building No.57 LongGuang East Road, Guangdong Shenzhen 518109
  • ഇമെയിൽ: qiujinz@outlook.com

For European customers, the EC/REP contact is:

  • കമ്പനി: Zhou's Jade Star UG
  • വിലാസം: Brunnenallee11A, 14478 Potsdam, Germany
  • ഇമെയിൽ: jadestar.eu@gmail.com
Product information label for MZHOU M.2 SATA Adapter, showing product name, model, brand, manufacturer, production batch, and EC/REP details.

Figure 11.1: Product Information Label

അനുബന്ധ രേഖകൾ - MZHOU M 2

പ്രീview MZHOU PCI-E to USB Card Instruction Manual - Model Mzhou-k3
Instruction manual for the MZHOU PCI-E to USB Card (Model Mzhou-k3), detailing product parameters, packing list, description, environmental use, and warm tips for installation and operation.
പ്രീview MZHOU-7 Ports PCIe to USB 3.0 Expansion Card - Instruction Manual
Comprehensive guide for the MZHOU-7 Ports PCIe to USB 3.0 Expansion Card, detailing product specifications, packing contents, compatibility, environmental usage, and important safety tips. Features 7 USB 3.0 ports, 5Gbps transfer speeds, and PCI-E interface.
പ്രീview MZHOU M.2 SSD NVME PCIe 3.0 x1 അഡാപ്റ്റർ കാർഡ് - നിർദ്ദേശ മാനുവൽ
MZHOU M.2 SSD M-Key NVME PCIe 3.0 x1 അഡാപ്റ്റർ കാർഡിനായുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ, ഉൽപ്പന്ന പാരാമീറ്ററുകൾ, ഉപയോഗം, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview MZHOU PCI-E M.2/NGFF കാർഡ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ - ഡെസ്ക്ടോപ്പ് വൈഫൈ മെച്ചപ്പെടുത്തുക
MZHOU PCI-E M.2/NGFF കാർഡിനായുള്ള സമഗ്രമായ നിർദ്ദേശ മാനുവൽ, ഉൽപ്പന്ന പാരാമീറ്ററുകൾ, പാക്കിംഗ് ലിസ്റ്റ്, വിവരണം, പരിസ്ഥിതി ഉപയോഗം, ഇൻസ്റ്റാളേഷനും പ്രവർത്തനത്തിനുമുള്ള പ്രധാന നുറുങ്ങുകൾ എന്നിവ വിശദീകരിക്കുന്നു. ഇന്റൽ, എഎംഡി റൈസൺ സിസ്റ്റങ്ങളുമായി പൊരുത്തപ്പെടുന്നു.
പ്രീview MZHOU U.2 PCIe എക്സ്പാൻഷൻ കാർഡ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ - നിങ്ങളുടെ സംഭരണം മെച്ചപ്പെടുത്തുക
MZHOU U.2 PCIe എക്സ്പാൻഷൻ കാർഡിനായുള്ള വിശദമായ നിർദ്ദേശ മാനുവൽ. ഇൻസ്റ്റാളേഷൻ, ഉൽപ്പന്ന പാരാമീറ്ററുകൾ, NVMe, SATA SSD-കളുമായുള്ള അനുയോജ്യത, ഒപ്റ്റിമൽ പ്രകടനത്തിനുള്ള പരിസ്ഥിതി മാർഗ്ഗനിർദ്ദേശങ്ങൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview MZHOU DC/DC 48V 15A പരമാവധി വോളിയംtagഇ കൺവെർട്ടർ - ഇൻസ്ട്രക്ഷൻ മാനുവൽ
MZHOU DC/DC 48V 15A MAX വോളിയത്തിനായുള്ള വിശദമായ നിർദ്ദേശ മാനുവൽtagഇ കൺവെർട്ടർ. ഈ 720W സ്റ്റെപ്പ്-അപ്പ് ട്രാൻസ്ഫോർമറിന്റെ ഉൽപ്പന്ന പാരാമീറ്ററുകൾ, സ്പെസിഫിക്കേഷനുകൾ, ഉപയോഗം, സുരക്ഷാ മുന്നറിയിപ്പുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.