Magene H64 ഹാർട്ട് റേറ്റ് മോണിറ്റർ യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the Magene H64 Heart Rate Monitor. The H64 is designed to accurately track your heart rate during various physical activities, helping you optimize your training and monitor your fitness levels. It features advanced hardware and algorithms for reliable performance and supports both ANT+ and Bluetooth protocols for broad compatibility.

Image 1.1: Magene H64 Heart Rate Monitor with chest strap.

2. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1x Magene H64 Heart Rate Sensor
• 1x CR2032 Battery (pre-installed in sensor)
• 1x Adjustable Elastic Chest Strap

Image 2.1: Components included in the Magene H64 package.

3. സജ്ജീകരണം

3.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Before first use, remove the insulating sheet from the pre-installed CR2032 battery. This is typically a small plastic tab.
2. To replace the battery, open the battery compartment on the back of the sensor unit. Insert a new CR2032 battery with the positive (+) side facing up.
3. Close the battery compartment securely to ensure water resistance.

3.2 Wearing the Heart Rate Monitor

1. Attach the heart rate sensor to the elastic chest strap. Ensure the Magene logo on the sensor is oriented correctly (right way up).
2. നെഞ്ച് സ്ട്രാപ്പിന്റെ പിൻഭാഗത്തുള്ള ഇലക്ട്രോഡ് ഭാഗങ്ങൾ വെള്ളമോ ഇലക്ട്രോഡ് ജെല്ലോ ഉപയോഗിച്ച് നനയ്ക്കുക. ഇത് ചാലകത മെച്ചപ്പെടുത്തുകയും കൃത്യമായ ഹൃദയമിടിപ്പ് കണ്ടെത്തൽ ഉറപ്പാക്കുകയും ചെയ്യുന്നു.
3. Position the chest strap directly against your skin, just below your pectoral muscles. Adjust the strap for a snug, comfortable fit. The sensor will not be found by other devices if the electrode areas are not wet or if the strap is not close to your skin.

Image 3.1: Proper placement of the Magene H64 Heart Rate Monitor on the chest.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 ഉപകരണങ്ങളുമായും ആപ്ലിക്കേഷനുകളുമായും ജോടിയാക്കൽ

The Magene H64 supports both ANT+ and Bluetooth protocols, allowing it to connect with a wide range of devices and applications simultaneously.

• ANT+ അനുയോജ്യത: Magene, Wahoo, IGPSPORT, Bryton, Black Bird bike computers, and other ANT+ enabled devices.
• ബ്ലൂടൂത്ത് അനുയോജ്യത: Zwift, Onelap, Strava, Kinomap, Wahoo Fitness, TrainerRoad, Rouvy, Fulgaz, Nike Run Club, Openrider, Elite HRV, Selfloops HRV, and other Bluetooth-enabled fitness applications on iOS/Android smartphones.

4.2 കണക്ഷൻ നടപടിക്രമം

1. Ensure the heart rate monitor is worn correctly and the electrodes are moistened (refer to Section 3.2). The sensor activates automatically when a heart rate signal is detected.
2. For ANT+ Devices: Turn on your ANT+ compatible device (e.g., bike computer, sports watch). Navigate to the sensor pairing menu and search for new sensors. Select the Magene H64 when it appears.
3. For Bluetooth Applications: Open your preferred fitness application on your smartphone or tablet. Go to the sensor or device pairing settings within the application. പ്രധാനപ്പെട്ടത്: Do not attempt to pair the heart rate monitor through your phone's system Bluetooth settings; it must be paired directly within the application. Select the Magene H64 when it is discovered by the app.
4. Once paired, your heart rate data will be displayed on your connected device or application.

5. പരിപാലനം

5.1 നെഞ്ച് സ്ട്രാപ്പ് വൃത്തിയാക്കൽ

After each use, detach the sensor unit from the chest strap. Rinse the elastic strap with clean water and hang it to dry. Do not machine wash or tumble dry the strap, as this may damage the electrodes. The sensor unit itself can be wiped clean with a damp തുണി.

5.2 ബാറ്ററി ലൈഫും മാറ്റിസ്ഥാപിക്കലും

The Magene H64 uses a CR2032 coin cell battery, providing approximately 1000 hours of operation. When the battery is low, your connected device or application may indicate a weak signal or fail to connect. Replace the battery as described in Section 3.1.

Image 5.1: The Magene H64 offers extended battery life for diverse sports.

5.3 ജല പ്രതിരോധം

The Magene H64 Heart Rate Monitor is IP67 dustproof and waterproof. This means it is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use in rain and during sweaty workouts, but not for swimming.

Image 5.2: The Magene H64 is designed with IP67 water resistance.

6. പ്രശ്‌നപരിഹാരം

• Sensor not detected by device/app:
  • Ensure the electrode areas on the chest strap are moistened.
  • Verify the strap is worn directly against your skin and is snug.
  • Check if the insulating sheet has been removed from the battery.
  • Confirm the battery is correctly installed and has sufficient charge.
  • For Bluetooth connections, ensure you are pairing within the fitness application, not through the phone's system Bluetooth settings.
  • Move closer to your device if there is a significant distance.
• കൃത്യമല്ലാത്ത ഹൃദയമിടിപ്പ് വായനകൾ:
  • ഇലക്ട്രോഡുകൾ വീണ്ടും നനയ്ക്കുക.
  • Adjust the strap for a better fit; it should be snug but not uncomfortably tight.
  • Ensure the sensor is positioned correctly on your chest.
  • മറ്റ് ഇലക്ട്രോണിക് ഉപകരണങ്ങളിൽ നിന്നുള്ള ഏതെങ്കിലും തരത്തിലുള്ള ഇടപെടലുകൾക്കായി പരിശോധിക്കുക.
• Sensor automatically enters sleep state:
  • The H64 sensor is designed to automatically enter a sleep state after 30 seconds of inactivity (when the heart rate strap is removed) to conserve power. This is normal operation.
  • To reactivate, simply wear the strap again with moistened electrodes.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

The Magene H64 Heart Rate Monitor comes with a 1 വർഷത്തെ വാറൻ്റി against manufacturing defects. Please note that man-made damage is not covered under this warranty.

Magene is committed to providing a ജീവിതകാലം മുഴുവൻ വിൽപ്പനാനന്തര സേവനം for its products. For technical support, warranty claims, or any inquiries, please contact Magene customer service through their official webഉൽപ്പന്നം വാങ്ങിയ സൈറ്റ് അല്ലെങ്കിൽ റീട്ടെയിലർ.

For more information, visit the official Magene store: Magene Store on Amazon.