1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Kärcher PCL 3-18 Wood Surface Brush Roller Set (Model 2.644-339.0) is designed for effective cleaning of wood surfaces and WPC (Wood Plastic Composite) decking. This set includes two cylindrical brushes that replace the standard brushes of the Kärcher PCL 3-18 patio cleaner, ensuring thorough and deep cleaning results.
Figure 1: Kärcher PCL 3-18 Wood Surface Brush Roller Set. This image shows the two cylindrical brushes included in the set, designed for cleaning wood and WPC surfaces.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
Always observe the safety instructions provided in the main operating manual for your Kärcher PCL 3-18 patio cleaner. The following points are specific to the brush roller set:
- Ensure the PCL 3-18 device is switched off and disconnected from the power supply before installing or removing the brush rollers.
- Do not use damaged brush rollers. Inspect them for wear or damage before each use.
- പ്രവർത്തന സമയത്ത് കൈകളും അയഞ്ഞ വസ്ത്രങ്ങളും കറങ്ങുന്ന ഭാഗങ്ങളിൽ നിന്ന് അകറ്റി നിർത്തുക.
- Store brush rollers in a dry, clean place away from direct sunlight and extreme temperatures.
3. പാക്കേജ് ഉള്ളടക്കം
പായ്ക്ക് അൺപാക്ക് ചെയ്യുമ്പോൾ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- 2 x Cylindrical Brush Rollers for Wood Surfaces
Note: The Kärcher PCL 3-18 patio cleaner is sold separately and is required for the use of these brush rollers.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The brush rollers are designed for easy, tool-free replacement on your Kärcher PCL 3-18 patio cleaner.
- പവർ ഓഫ്: Ensure your Kärcher PCL 3-18 device is switched off and unplugged from the power source.
- പഴയ ബ്രഷുകൾ നീക്കം ചെയ്യുക: Refer to your PCL 3-18 manual for specific instructions on how to release and remove the existing brush rollers. Typically, this involves pressing release buttons or levers.
- പുതിയ ബ്രഷുകൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Align the new wood surface brush rollers with the mounting points on the PCL 3-18. Gently push them into place until they click securely. Ensure both rollers are properly seated and can rotate freely.
- ഇൻസ്റ്റാളേഷൻ പരിശോധിക്കുക: Lightly tug on the installed brushes to confirm they are firmly attached before reconnecting power and operating the device.
Figure 2: Illustrative image of brush roller installation. The image depicts the process of inserting the new brush rollers into the Kärcher PCL 3-18 device until they lock into position.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the wood surface brush rollers are installed, operate your Kärcher PCL 3-18 patio cleaner according to its main operating manual. These brushes are optimized for:
- മരത്തിന്റെ പ്രതലങ്ങൾ: Ideal for cleaning wooden decks, patios, and other outdoor wood structures.
- WPC Decking: Suitable for composite decking materials, providing effective cleaning without damage.
Always test on an inconspicuous area first to ensure compatibility and desired cleaning results, especially on delicate or treated wood surfaces. Maintain a steady, even pace during cleaning to achieve uniform results.
6. പരിപാലനം
Proper maintenance extends the lifespan of your brush rollers and ensures consistent cleaning performance.
- ഉപയോഗത്തിന് ശേഷം വൃത്തിയാക്കൽ: After each use, remove the brush rollers from the PCL 3-18. Rinse them thoroughly with clean water to remove dirt, debris, and cleaning solution residues.
- പരിശോധന: Regularly inspect the bristles for wear, damage, or embedded foreign objects. Remove any tangled debris.
- ഉണക്കൽ: Allow the brush rollers to air dry completely before storing them. Do not store them wet, as this can lead to mildew or damage.
- സംഭരണം: Store the dry brush rollers in a cool, dry place, protected from direct sunlight and frost.
- മാറ്റിസ്ഥാപിക്കൽ: Replace brush rollers when bristles show significant wear, are damaged, or cleaning performance diminishes.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your brush rollers, consider the following:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| മോശം ക്ലീനിംഗ് പ്രകടനം | Worn bristles; incorrect pressure; excessive speed. | Replace brush rollers; adjust pressure and speed according to PCL 3-18 manual. |
| Brushes not rotating freely | Debris caught in brushes; improper installation. | Remove debris; re-install brushes ensuring they click into place. |
| പ്രവർത്തന സമയത്ത് അസാധാരണമായ ശബ്ദം | Damaged brushes; foreign object. | Inspect brushes for damage and replace if necessary; check for and remove foreign objects. |
For further troubleshooting or issues related to the Kärcher PCL 3-18 device itself, refer to its dedicated instruction manual or contact Kärcher customer support.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 2.644-339.0 |
| നിർമ്മാതാവ് | Kärcher |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 13.4 x 10 x 10 സെ.മീ |
| ഭാരം | 530 ഗ്രാം |
| നിറം | കറുപ്പ് |
| ഉദ്ദേശിച്ച ഉപയോഗം | Wood surfaces, WPC decking |
| ഘടകങ്ങൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട് | Two brush rollers |
| പവർ സോഴ്സ് തരം | Manual power (used with PCL 3-18 device) |
| മാതൃരാജ്യം | ചൈന |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information regarding the Kärcher PCL 3-18 Wood Surface Brush Roller Set, please refer to the warranty documentation provided with your Kärcher PCL 3-18 patio cleaner or visit the official Kärcher website. Kärcher provides customer support for product inquiries, technical assistance, and spare parts.
Kärcher ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: www.kaercher.com
Please have your product model number (2.644-339.0) and purchase details ready when contacting support.
