1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Rust-Oleum Varathane One-Step Stain & Polyurethane is a water-based product designed to combine the benefits of a wood stain and a protective polyurethane finish into a single application. This formulation provides a deep, rich color and durable protection for various indoor wood surfaces, eliminating the need for multiple product layers. It is suitable for use on furniture, cabinets, trim, and doors.
This image displays the product can for Varathane One Step Stain + Poly Water Based. The label clearly indicates 'One Step Stain + Poly', 'Water Based', 'Provincial' color, and 'Semi-Gloss' finish. It also highlights features like 'Rich Even Color', 'Superior Scratch Resistance', and 'Complete Project 5x Faster'.
2 സുരക്ഷാ വിവരങ്ങൾ
Always read and follow all instructions and safety precautions on the product label before use. This product is for indoor use only.
- Ensure adequate ventilation during application and drying. Open windows and doors, or use a fan.
- Wear appropriate personal protective equipment, including gloves and eye protection, to prevent skin and eye contact.
- കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Do not ingest. If swallowed, call a poison control center immediately.
- In case of eye contact, flush thoroughly with water for 15 minutes and seek medical attention.
- Dispose of unused product and cleaning materials according to local regulations.
3. Surface Preparation (Setup)
Proper surface preparation is crucial for optimal adhesion and finish quality.
- പുതിയ മരം: Sand the bare wood surface in the direction of the grain until smooth. Begin with 120-grit sandpaper and progress to 220-grit sandpaper. Remove all sanding dust with a vacuum or a tack cloth.
- Previously Finished Wood: Ensure the surface is clean, dry, and free of wax, grease, polish, or other contaminants. Lightly sand the existing finish with 220-grit sandpaper to dull the surface and create a profile for adhesion. Remove all sanding dust. If the existing finish is peeling or severely damaged, it should be removed completely.
- വ്യവസ്ഥ: Ensure the wood is completely dry before application. Avoid applying in high humidity conditions.
4. Application Instructions (Operating)
Follow these steps for best results:
- നന്നായി ഇളക്കുക: Before and during use, stir the product gently but thoroughly. Do not shake, as this can introduce air bubbles.
- ടെസ്റ്റ് ഏരിയ: Always test the product on an inconspicuous area or scrap wood to verify color and adhesion.
- Apply First Coat: Apply a thin, even coat using a high-quality synthetic brush or foam applicator. Apply in the direction of the wood grain. Avoid over-brushing.
- ഉണങ്ങാൻ അനുവദിക്കുക: Allow the first coat to dry completely. Drying time can vary based on temperature and humidity. Refer to the 'Drying and Recoat Times' section.
- Light Sanding (Optional): For a smoother finish, lightly sand with 220-grit sandpaper between coats after the previous coat has dried. Remove all sanding dust with a tack cloth.
- Apply Additional Coats: Apply subsequent coats as needed to achieve desired color depth and protection. Typically, 2-3 coats are recommended.
5. Drying and Recoat Times
Drying times are approximate and can be affected by temperature, humidity, and film thickness.
- Touch Dry: ഏകദേശം 1 മണിക്കൂർ.
- റീകോട്ട് സമയം: ഏകദേശം 2-3 മണിക്കൂർ.
- നേരിയ ഉപയോഗം: Allow 24 hours before light use.
- Full Cure: Allow 3-5 days for the finish to fully cure and achieve maximum durability. Avoid placing heavy objects or covering the surface during this period.
6. Cleanup
Clean tools and spills immediately after use.
- Clean brushes, applicators, and other equipment with soap and warm water.
- Wipe up any spills or drips with a damp cloth before the product dries.
7. Maintenance of Finished Surface
To maintain the beauty and durability of your finished wood surface:
- പതിവായി മൃദുവായ, ഡി ക്ലീനർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp തുണി.
- അബ്രാസീവ് ക്ലീനറുകളോ കഠിനമായ രാസവസ്തുക്കളോ ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
- Protect the surface from excessive moisture and extreme temperature changes.
- Use coasters under beverages and felt pads under furniture to prevent scratches.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Uneven Finish / Streaks | Improper application technique, over-brushing, or uneven surface preparation. | Apply thin, even coats. Work in the direction of the grain. Ensure surface is properly sanded and clean. |
| Bubbles in Finish | Shaking the can, over-brushing, or applying too thickly. | Stir gently, do not shake. Apply thin coats. Use a high-quality applicator. |
| സാവധാനത്തിലുള്ള ഉണക്കൽ സമയം | High humidity, low temperature, or applying too thickly. | Ensure good ventilation. Apply in recommended temperature and humidity ranges. Apply thinner coats. |
| Poor Adhesion | Improper surface preparation (e.g., oily, waxy, or unsanded surface). | Thoroughly clean and sand the surface as per preparation instructions. |
9. ഉൽപ്പന്ന സവിശേഷതകൾ
- ബ്രാൻഡ്: റസ്റ്റ്-ഓലിയം
- മോഡലിൻ്റെ പേര്: One Step Stain & Polyurethane, Water-Based Semi Gloss
- ഇനം മോഡൽ നമ്പർ: 336359
- മെറ്റീരിയൽ: Polyurethane, Water Based
- നിറം: പ്രൊവിൻഷ്യൽ
- പൂർത്തിയാക്കുക: സെമി-ഗ്ലോസ്
- ഉപരിതല ശുപാർശ: Cabinets, Door, Furniture, Wood
- പാക്കേജ് അളവുകൾ: 4.8 x 4.33 x 4.21 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 2.39 പൗണ്ട്
- ASIN: B0B3F5NJ43
- ആദ്യം ലഭ്യമായ തീയതി: ജൂൺ 7, 2022
10. പിന്തുണാ വിവരങ്ങൾ
For further assistance, technical support, or product inquiries, please contact Rust-Oleum customer service. Refer to the product packaging for the most current contact information or visit the official Rust-Oleum webസൈറ്റ്.
നിർമ്മാതാവ്: റസ്റ്റ്-ഓലിയം
Webസൈറ്റ്: www.rustoleum.com (ദയവായി ഔദ്യോഗികമായി പരിശോധിക്കുക) website for specific contact details and regional support.)
