ആമുഖം
This manual provides instructions for the Marvel Legends Series Drax 6-inch collectible action figure, inspired by Marvel Studios' Guardians of the Galaxy Vol. 3. Please read this manual carefully to ensure proper handling and enjoyment of your figure.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: ചെറിയ ഭാഗങ്ങൾ സൃഷ്ടിക്കപ്പെട്ടേക്കാം. 3 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്ക് വേണ്ട.
ബോക്സിൽ എന്താണുള്ളത്
- Drax Action Figure
- Two (2) Knife Accessories
- One (1) Build-A-Figure Part (Cosmo's Leg)
Image: Contents of the Marvel Legends Drax package, including the figure, two knives, and a Build-A-Figure leg.
സജ്ജമാക്കുക
- അൺബോക്സിംഗ്: Carefully remove the Drax figure and all accessories from the packaging. Retain packaging for future reference if desired.
- Attaching Knife Accessories: The two knife accessories can be held in the figure's hands. Gently slide the handle of each knife into the figure's grip. The knives can also be stored in the sheaths located on the figure's boots.
- Build-A-Figure Part: The included Build-A-Figure part is Cosmo's leg. Collect other figures in the series to complete the full Cosmo figure.
Image: Drax figure demonstrating the knife storage in his boot sheaths.
Operating (Posing the Figure)
The Drax action figure features multiple points of articulation for dynamic posing and display. Exercise care when adjusting joints to prevent damage.
- തല: The head can rotate and tilt for expressive poses.
- ആയുധങ്ങൾ: Shoulders, biceps, elbows (double-jointed), and wrists allow for a wide range of arm movements.
- ശരീരം: Features an abdominal crunch and waist swivel for upper body articulation.
- കാലുകൾ: Hips, thighs, knees (double-jointed), and ankles provide flexibility for various stances.
Image: Drax figure posed dynamically with his knives, showcasing articulation.
Image: Drax figure in a lunging action pose, demonstrating range of motion.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: To clean the figure, gently wipe with a soft, dry cloth. For stubborn dirt, a slightly damp തുണി ഉപയോഗിക്കാം, തുടർന്ന് ഉടനടി ഉണക്കാം. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളോ ഉള്ള വസ്തുക്കൾ ഒഴിവാക്കുക.
- സംഭരണം: Store the figure and its accessories in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
ട്രബിൾഷൂട്ടിംഗ്
- കടുപ്പമുള്ള സന്ധികൾ: If a joint is stiff, gently apply a small amount of heat (e.g., from a hairdryer on a low setting, held at a safe distance) to the joint area for a few seconds. Then, carefully attempt to move the joint. Do not force stiff joints.
- അയഞ്ഞ സന്ധികൾ: For excessively loose joints, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the joint and allowed to dry.
- നഷ്ടപ്പെട്ട ആക്സസറികൾ: Keep all small accessories in a secure location when not in use to prevent loss. Replacement parts are generally not available from the manufacturer.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 2.38 x 5.5 x 10 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 3.77 ഔൺസ് |
| ഇനം മോഡൽ നമ്പർ | F6603 |
| നിർമ്മാതാവ് ശുപാർശ ചെയ്യുന്ന പ്രായം | 4 വർഷവും അതിൽ കൂടുതലും |
| റിലീസ് തീയതി | ഏപ്രിൽ 1, 2023 |
| നിർമ്മാതാവ് | ഹസ്ബ്രോ |
ഉൽപ്പന്നം കഴിഞ്ഞുview (360 Degree View)
Observe the Marvel Legends Series Drax figure from all angles to appreciate its detailed sculpt and design.
വീഡിയോ: ഒരു 360-ഡിഗ്രി view of the Marvel Legends Drax action figure, showcasing its design and articulation from all sides.
അധിക ചിത്രങ്ങൾ
Image: Front of the product packaging.
Image: Back of the product packaging, highlighting the Build-A-Figure component.
ചിത്രം: വിശദമായത് view of Drax's face sculpt and markings.
Image: Drax figure in a dynamic running pose.
