MOLAER 2QJTD-US

MOLAER LED Headlamp റീചാർജ് ചെയ്യാവുന്ന ഫ്ലാഷ്ലൈറ്റ് ഉപയോക്തൃ മാനുവൽ

Brand: MOLAER | Model: 2QJTD-US

ആമുഖം

Thank you for choosing the MOLAER LED Headlamp. This rechargeable flashlight is designed for versatility and comfort, offering a 230-degree wide beam illumination, multiple light modes, and motion sensor functionality. Its lightweight and weatherproof design makes it ideal for various outdoor activities such as camping, hiking, running, and general outdoor use. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your headlamp.

എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

Your MOLAER LED Headlamp പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉൾപ്പെടുന്നു:

Two MOLAER LED headlamps, two USB-C charging cables, and two black storage bags.

Image: Contents of the MOLAER LED Headlamp 2-pack, including headlamps, charging cables, and storage bags.

ഉൽപ്പന്ന സവിശേഷതകൾ

Diagram showing the components of the MOLAER headlamp: ON/OFF button, Sensor switch, Sensor reception, XPE LED, Elastic headband, Adjustable buckle, Sensor emission, Power display, and COB LED.

Image: Labeled diagram of the headlamp's key components.

Image illustrating the motion sensor feature of the headlamp, showing a hand waving in front of the sensor. Also displays icons for 350LM brightness and 8 hours max time on low.

Image: Motion sensor functionality and battery life indication.

MOLAER headlamp being splashed with water, demonstrating its IPX5 waterproof rating.

ചിത്രം: ദി ഹെഡ്ൽamp's IPX5 waterproof capability.

സജ്ജമാക്കുക

  1. അൺപാക്ക്: Carefully remove the headlamp പാക്കേജിംഗിൽ നിന്നുള്ള ആക്സസറികളും.
  2. പ്രാരംഭ ചാർജ്: ആദ്യ ഉപയോഗത്തിന് മുമ്പ്, ഹെഡ്‌ലെറ്റ് പൂർണ്ണമായും ചാർജ് ചെയ്യുകamp. Refer to the "Charging" section for detailed instructions.
  3. ഹെഡ്‌ബാൻഡ് ക്രമീകരിക്കുക: തലയിടുകamp on your head. Use the adjustable buckle on the elastic headband to achieve a snug yet comfortable fit. Ensure the light source is positioned correctly for your intended use.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The MOLAER headlamp features intuitive controls for easy operation.

  1. പവർ ഓൺ/ഓഫ്: Press the ON/OFF button once to turn the headlamp on. Press it again to cycle through the light modes. If the light has been on for more than 10 seconds, a single press will turn it off.
  2. സൈക്കിൾ ലൈറ്റ് മോഡുകൾ:
    • Press the ON/OFF button repeatedly to cycle through: XPE LED High > XPE LED Low > COB Light High > COB Light Low.
  3. Activate Flash Light Mode: In any light mode, press and hold the ON/OFF button for 2 seconds to activate the Flash Light mode. Press again to return to the previous mode or turn off.
  4. മോഷൻ സെൻസർ സജീവമാക്കൽ:
    • Once you have selected your desired light mode, press the dedicated Motion Sensor switch (usually indicated by a wave icon).
    • When the motion sensor is active, you can turn the headlamp on or off by waving your hand approximately 2-4 inches in front of the sensor reception area.
    • To deactivate the motion sensor, press the Motion Sensor switch again.

ചാർജിംഗ്

The MOLAER headlamp is equipped with a built-in rechargeable battery for convenience.

  1. ബന്ധിപ്പിക്കുക: Locate the Type-C USB input port on the headlamp. Insert the provided Type-C USB cable into the port.
  2. ഊർജ്ജ സ്രോതസ്സ്: Connect the other end of the USB cable to a compatible power source such as a computer USB port, a wall charger (not included), a car charger, or a power bank.
  3. ചാർജിംഗ് സൂചകം:
    • A ചുവന്ന വെളിച്ചം will flash to indicate that the battery is low.
    • During charging, the indicator light will turn ചുവപ്പ്.
    • When the battery is fully charged, the indicator light will turn പച്ച.
  4. ചാർജിംഗ് സമയം: Charging time may vary depending on the power source. Ensure the headlamp is fully charged for optimal performance.
Close-up of the Type-C charging port on the headlamp, with illustrations of various charging methods: power bank, wall charger, laptop, and car charger.

Image: Type-C charging port and compatible charging methods.

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഹെഡ്amp ഓണാക്കുന്നില്ല.ബാറ്ററി തീർന്നു.തലക്കെട്ട് ചാർജ് ചെയ്യുകamp നൽകിയിരിക്കുന്ന USB-C കേബിൾ പൂർണ്ണമായും ഉപയോഗിക്കുന്നു.
പ്രകാശ ഔട്ട്പുട്ട് മങ്ങിയതാണ്.കുറഞ്ഞ ബാറ്ററി അല്ലെങ്കിൽ തെറ്റായ മോഡ്.Recharge the battery. Cycle through light modes to ensure you are in a high brightness setting.
മോഷൻ സെൻസർ പ്രതികരിക്കുന്നില്ല.Sensor not activated or obstruction.Ensure the motion sensor mode is activated (press the sensor switch). Clear any obstructions in front of the sensor. Ensure hand wave is within 2-4 inches.
ഹെഡ്amp ചാര്ജ്ജ് ആകുന്നില്ല.കേബിളിലോ പവർ സ്രോതസ്സിലോ പ്രശ്നം.Ensure the USB-C cable is fully inserted. Try a different USB port or power adapter. Verify the charging indicator light is red.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ്മോളെർ
മോഡൽ2QJTD-യുഎസ്
പ്രകാശ സ്രോതസ്സ് തരംLED (XPE and COB)
തെളിച്ചം350 Lumens വരെ
ബീം ആംഗിൾ230 ഡിഗ്രി
ബാറ്ററി1500mAh ലിഥിയം അയൺ (ഉൾപ്പെടുത്തിയത്)
ചാർജിംഗ് പോർട്ട്USB-C
ജല പ്രതിരോധംIPX5 കാലാവസ്ഥ പ്രതിരോധം
മെറ്റീരിയൽസിലിക്കൺ റബ്ബർ
ഇനത്തിൻ്റെ ഭാരം2.6 Ounces (per headlamp)
ഉൽപ്പന്ന അളവുകൾ4.7"D x 3.1"W x 2.1"H
വാല്യംtage3.7 വോൾട്ട്
ലൈറ്റ് പാത്ത് ദൂരം150 അടി
വർണ്ണ താപനില5000 കെൽവിൻ

വാറൻ്റിയും പിന്തുണയും

MOLAER stands behind the quality of its products. Your LED Headlamp കൂടെ വരുന്നു:

For further assistance or to contact customer support, please visit the official MOLAER store: MOLAER Store on Amazon.

Documents - MOLAER – 2QJTD-US

പ്രസക്തമായ രേഖകളൊന്നുമില്ല.