FLIPSKY FSESC75100 FOC 75V 100A Single ESC Instruction Manual

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങളും മുന്നറിയിപ്പുകളും

Please read and understand all safety information before operating the FLIPSKY FSESC75100. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• ഫേംവെയർ പതിപ്പ്: It is recommended to maintain firmware version 5.2 as shipped from the factory. Upgrading to newer firmware versions may potentially damage the ESC.
• കേവല പരമാവധി കറന്റ്: Ensure the Absolute Maximum Current setting in the configuration software is limited to below 250A.
• Phase Filtering (Firmware 5.3+): If using firmware version 5.3 or above (VESC_TOOL 3.01), the phase filter function വേണം be turned off by selecting "false" in VESC_tool. Operating without disabling the phase filter will result in ESC damage.
• Configuration Wizard: When using the VESC_tool wizard interface, do not restore default parameters if you have made specific adjustments, especially regarding phase filtering.
• Electrical Sensitivity: This controller is highly sensitive to electrical spikes, incorrect wiring, reverse polarity, and ground faults. Exercise extreme caution during installation and connection to prevent damage.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The FLIPSKY FSESC75100 is a robust Electronic Speed Controller (ESC) designed for high-power applications in electric skateboards, scooters, and ebikes. It features an aluminum PCB for superior heat management and supports advanced control modes.

പ്രധാന സവിശേഷതകൾ

• Supports BLDC square wave mode control and FOC sine wave mode.
• Programmable via VESC_tool, offering overheat and overcurrent protection.
• Compatible with various sensors: ABI, HALL, AS5047, AS5048A.
• വൈഡ് വോളിയംtage input: 14-84V (4-20S).
• High current capability: 100A continuous, 120A burst.
• Maximum ERPM: 150000.
• Control Interface Ports: USB, CAN, UART.
• Input Set Support: PPM, ADC, NRF, UART.
• Features regenerative braking capability.

ഉൽപ്പന്ന ഘടകങ്ങൾ

ചിത്രം: മുൻഭാഗം view of the FLIPSKY FSESC75100, showcasing its compact design and main connections.

ചിത്രം: മുന്നിലും പിന്നിലും views of the FSESC75100, highlighting the aluminum casing and connection points for power and motor phases.

സ്പെസിഫിക്കേഷനുകൾ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

ഭൗതിക അളവുകൾ

Consider the following dimensions for proper mounting and integration into your electric vehicle.

Image: Physical dimensions of the FSESC75100, indicating length (103mm), width (58mm), and height (18.5mm) for installation planning.

വയറിംഗ് കണക്ഷനുകൾ

Carefully connect the ESC to your motor, battery, and control interfaces. Refer to the detailed wiring diagram below for correct pin assignments and connection points.

Image: Detailed wiring diagram for the FSESC75100, showing connections for motor, battery, USB, PPM, CAN, SWD, COMM, UART2, and HALL sensors, along with external display integration.

പോർട്ട് വിവരണങ്ങൾ

ചിത്രം: ക്ലോസ്-അപ്പ് view of the FSESC75100 ports, labeling each connector for various functions like USB, Servo, Hall sensors, and communication interfaces.

• USB പോർട്ട്: For connecting to a computer for configuration and firmware updates via VESC_tool.
• PPM Port: Used for Pulse Position Modulation input, typically from a remote control receiver.
• CAN Port: Enables Controller Area Network communication, allowing multiple ESCs or other compatible devices to communicate.
• UART പോർട്ടുകൾ: Universal Asynchronous Receiver-Transmitter for serial communication with external modules such as Bluetooth adapters or displays.
• HALL Sensor Ports: For connecting Hall effect sensors from the motor, providing precise motor position feedback for sensored operation.
• താപനില സെൻസർ പോർട്ട്: For connecting an external temperature sensor to monitor ESC or motor temperature.
• LED സൂചകങ്ങൾ: Blue and Red/Green LEDs provide visual status feedback during operation and configuration.

Important Connection Notes

• Always ensure all connections are firm and correctly seated to prevent intermittent operation or damage.
• When disconnecting wires, always press the release tab on the connector (if present) to avoid pulling directly on wires, which can cause damage.
• Strictly observe correct polarity for battery connections. Reverse polarity will cause immediate and irreversible damage to the ESC.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Initial Configuration with VESC_tool

The FSESC75100 is highly configurable using the VESC_tool software. This tool allows you to set up motor parameters, current limits, and other operational settings.

1. സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാളേഷൻ: Download and install the latest VESC_tool software from the official VESC project website or FLIPSKY support resources.
2. Connect ESC: Connect the FSESC75100 to your computer using a USB-C cable.
3. Launch VESC_tool: Open the VESC_tool application and establish a connection to the ESC.
4. Motor Setup Wizard: Follow the guided motor setup wizard within VESC_tool to automatically detect and configure your motor's parameters.
5. Critical Firmware Setting (Firmware 5.3+): If your ESC is running firmware version 5.3 or newer (corresponding to VESC_TOOL 3.01 or later), navigate to the motor settings and disable the phase filter function by selecting "false". This step is crucial to prevent ESC damage.
6. Absolute Maximum Current Limit: In the VESC_tool settings, ensure that the "Absolute Maximum Current" parameter is set to a value below 250A to protect the ESC.
7. കോൺഫിഗറേഷൻ സംരക്ഷിക്കുക: After making all necessary adjustments, save the configuration to the ESC.

നിയന്ത്രണ മോഡുകൾ

The ESC supports two primary motor control modes:

• BLDC Square Wave Mode: A traditional control method, generally simpler but can be less efficient and produce more motor noise.
• FOC Sine Wave Mode: Field-Oriented Control offers smoother, quieter, and more efficient motor operation. It is generally recommended for most applications.

Select your preferred control mode within the VESC_tool software based on your motor type and application requirements.

Internal Design and Heat Management

The FSESC75100 is engineered with an aluminum PCB and a robust metal casing to effectively manage heat generated during operation, ensuring reliability and longevity.

Image: Illustration of the heat dissipation mechanism within the FSESC75100, showing the aluminum PCB and metal case working together to transfer heat away from critical components.

The design incorporates 2mm nickel-copper strips to enhance overcurrent capacity and further improve heat dissipation. High-quality MOSFETs are utilized for efficient power handling.

ചിത്രം: ക്ലോസ്-അപ്പ് view of the 6pcs HYG015N10NS1TA high-quality MOSFETs used in the FSESC75100, critical for power switching and motor control.

മെയിൻ്റനൻസ്

Proper maintenance ensures the longevity and reliable performance of your FSESC75100.

• വൃത്തിയാക്കൽ: Periodically inspect the ESC for dust, dirt, or debris accumulation. Gently clean with a soft brush or compressed air. Avoid using liquids directly on the ESC.
• തണുപ്പിക്കൽ: Ensure the ESC is mounted in a location with adequate airflow to facilitate heat dissipation. Do not obstruct the casing, as it acts as a heatsink.
• കണക്ഷൻ പരിശോധനകൾ: Regularly check all electrical connections (motor, battery, sensors, control signals) for any signs of looseness, corrosion, or damage. Secure any loose connections immediately.
• പരിസ്ഥിതി സംരക്ഷണം: Protect the ESC from direct exposure to water, excessive humidity, and extreme temperatures (both high and low) beyond its operating range.

ട്രബിൾഷൂട്ടിംഗ്

ഈ വിഭാഗം പൊതുവായ പ്രശ്നങ്ങൾ അഭിസംബോധന ചെയ്യുകയും അവ പരിഹരിക്കുന്നതിനുള്ള മാർഗ്ഗനിർദ്ദേശം നൽകുകയും ചെയ്യുന്നു.

• ESC Damage After Firmware Upgrade: If the ESC malfunctions after a firmware update, it is likely due to incompatibility or incorrect settings. It is strongly advised to stick to the factory firmware (version 5.2) unless specific instructions for a safe upgrade are provided by FLIPSKY.
• ESC Damage Due to Phase Filtering: If your ESC stops working or behaves erratically after a firmware update to version 5.3 or higher, verify that the phase filter function is explicitly set to "false" in VESC_tool. This is a critical setting.
• Unexpected Shutdowns or Overheating:
  • Check for proper ventilation around the ESC.
  • Verify that motor and battery parameters configured in VESC_tool are within the ESC's specified limits (e.g., current, voltagഒപ്പം).
  • Ensure the motor is not drawing excessive current due to mechanical binding or incorrect gearing.
• Motor Stuttering or Irregular Operation:
  • Review the ERPM limit and current limits in VESC_tool.
  • If using sensored mode, check all Hall sensor connections for proper seating and continuity.
  • Perform a motor detection in VESC_tool to re-calibrate motor parameters.
• അധികാരമില്ല അല്ലെങ്കിൽ പ്രതികരണമില്ല:
  • Confirm the battery is charged and properly connected with correct polarity.
  • Check all power and signal wires for breaks or loose connections.
  • Verify the power switch (if any) is in the ON position.

പിന്തുണ

For any technical questions, assistance with setup, or troubleshooting that cannot be resolved using this manual, please contact FLIPSKY customer support.

FLIPSKY is committed to providing support and aims to respond to inquiries within 24 hours.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Please refer to the official FLIPSKY webഏറ്റവും പുതിയ പിന്തുണാ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്ക് സൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷൻ.