FLIPSKY Dual Electric Speed Controller FSESC6.7 User Manual

1. ആമുഖം

This manual provides essential information for the proper installation, operation, and maintenance of your FLIPSKY Dual Electric Speed Controller FSESC6.7. This controller is designed for electric skateboards, e-bikes, scooters, robots, and similar applications, offering precise motor control and robust protection features. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• ഒന്നിലധികം നിയന്ത്രണ മോഡുകൾ: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
• വിപുലമായ ഫേംവെയർ: Utilizes the latest firmware version, offering rich control interface and sensor support.
• Balancing Car Functionality: Supports balancing car applications by connecting an IMU module via the IIC interface. Compatible IMU modules include MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
• Robust Power Handling: Features a continuous current of 140A and an instantaneous current of 400A.
• വൈഡ് വോളിയംtagഇ ശ്രേണി: Operates within a voltage range of 14V-60V (4-13S cells), safely supporting 4S to 12S battery configurations. Note: Voltage spikes must not exceed 60V.
• കോംപാക്റ്റ് ഡിസൈൻ: Dimensions of 79.8mm x 66.8mm x 17.8mm make it suitable for various installations.

3 സ്പെസിഫിക്കേഷനുകൾ

Note: It is recommended to keep firmware 5.2 from factory shipment. New firmware upgrades may potentially damage the ESC.

4. സജ്ജീകരണവും വയറിംഗും

Proper wiring is crucial for the safe and effective operation of the FLIPSKY Dual Electric Speed Controller. Refer to the diagrams below for connection details.

ചിത്രം 4.1: മുകളിൽ view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, showing the main board, capacitors, and connected motor and power wires. This image provides a general overview of the component layout.

ചിത്രം 4.2: താഴെ view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, illustrating the integrated aluminum anodized heat sink designed for efficient thermal management.

ചിത്രം 4.3: Physical dimensions of the FLIPSKY Dual Electric Speed Controller FSESC6.7, indicating a length of 79.8mm, a width of 66.8mm, and a height of 17.8mm. These measurements are important for installation planning.

4.1. കണക്ഷൻ കഴിഞ്ഞുview

The controller features various ports for power, motor connections, and communication with external devices. Ensure all connections are secure and correctly oriented.

ചിത്രം 4.4: Comprehensive wiring diagram illustrating the connection points for the battery, two motors, and a receiver. Numbered labels correspond to specific ports on the ESC.

ചിത്രം 4.5: Detailed pinout diagram for the various communication and sensor ports on the FSESC6.7. This includes pin assignments for SWD (1, 6), COMM (2, 7), CAN (3, 8), USB (4, 9), and SENSE (5, 10) interfaces.

4.2. Connection Points

• ബാറ്ററി കണക്ഷൻ: Connect your battery pack (4-13S, 14V-60V) to the main power cables (14AWG with XT90 connector). Ensure correct polarity.
• മോട്ടോർ കണക്ഷനുകൾ: Connect the two motors to the designated motor wire outputs (12AWG).
• റിസീവർ കണക്ഷൻ: Connect your PPM receiver to the appropriate input port for control signals.
• USB പോർട്ട്: Use the USB port for configuration and firmware updates (if applicable).
• CAN ബസ്: For multi-ESC setups or communication with other CAN-enabled devices.
• UART, SPI, IIC: These ports support various sensors and communication protocols, including IMU modules for balancing applications.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The FLIPSKY FSESC6.7 offers flexible control options and is programmable to suit various motor types and application requirements.

5.1. നിയന്ത്രണ മോഡുകൾ

The controller supports four primary control modes:

• നിലവിലെ നിയന്ത്രണം: Regulates the motor current.
• Dutycycle Control: Controls the motor speed based on the PWM duty cycle.
• വേഗത നിയന്ത്രണം: Maintains a desired motor RPM.
• സ്ഥാന നിയന്ത്രണം: Controls the motor to a specific angular position.

5.2. ഫേംവെയറും കോൺഫിഗറേഷനും

The ESC is programmable, allowing for customization of parameters. It is strongly recommended to maintain the factory-shipped firmware version 5.2. Upgrading to newer firmware versions carries a risk of damaging the ESC. Consult official FLIPSKY resources for any firmware-related guidance.

6. പരിപാലനം

To ensure the longevity and reliable performance of your FLIPSKY Dual Electric Speed Controller, follow these general maintenance guidelines:

• വൃത്തിയായും ഉണങ്ങിയും സൂക്ഷിക്കുക: Regularly inspect the ESC for dust, dirt, or moisture. Clean with a soft, dry brush or compressed air. Avoid exposure to water or high humidity.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Periodically check all wiring connections for looseness, corrosion, or damage. Secure any loose connections.
• തെർമൽ മാനേജ്മെൻ്റ്: Ensure adequate airflow around the heat sink, especially during operation. Avoid obstructing the heat sink.
• ശാരീരിക നാശം ഒഴിവാക്കുക: Protect the ESC from impacts or excessive vibrations.

7. പ്രശ്‌നപരിഹാരം

The FLIPSKY FSESC6.7 incorporates several protection functions to safeguard the unit and connected components. Understanding these can help in diagnosing issues.

7.1. സംരക്ഷണ പ്രവർത്തനങ്ങൾ

• കുറഞ്ഞ വോളിയംtagഇ സംരക്ഷണം: Activates if the battery voltage drops below a safe threshold, preventing over-discharge.
• ഉയർന്ന വോളിയംtagഇ സംരക്ഷണം: Engages if the input voltage exceeds the maximum limit (60V), protecting against over-voltage.
• ഓവർ-കറന്റ് പരിരക്ഷ: Limits current flow to prevent damage from excessive load.
• Temperature Abnormality Protection: Monitors internal temperature and reduces power or shuts down if temperatures become critical.
• MOSFETs Over-Temperature Protection: Specifically protects the MOSFETs from overheating.

7.2. General Troubleshooting Steps

• ശക്തിയില്ല: Check battery connections, battery charge level, and main power switch.
• മോട്ടോർ പ്രതികരിക്കുന്നില്ല: Verify motor connections, sensor connections (if applicable), and receiver signal. Check ESC configuration for correct motor type and control mode.
• ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം: Inspect all wiring for loose connections or damage. Check for signs of overheating.
• Error Codes/LED Indicators: Refer to the FLIPSKY software documentation for specific error codes or LED blink patterns, if available.

8. വാറൻ്റി വിവരങ്ങൾ

The FLIPSKY Dual Electric Speed Controller FSESC6.7 comes with a warranty period of 2 months or more. Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects but may not cover damage resulting from improper installation, misuse, unauthorized modifications, or firmware upgrades not explicitly recommended by the manufacturer.

9. പിന്തുണ

For technical assistance, product inquiries, or warranty support, please contact FLIPSKY customer service. Our support team is available to help resolve any issues you may encounter with your product.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Please refer to the official FLIPSKY webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്ക് സൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷൻ.