വാൻഗാർഡ് വീഒ 3 264APS ക്യാമറ ട്രൈപോഡ് ഉപയോക്തൃ മാനുവൽ

ആമുഖം

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Vanguard Veo 3 264APS Camera Tripod. Designed for stability and versatility, this aluminum tripod features a VEO PH-38S 2-way and 3-way panoramic ball joint, a monopod conversion option, and robust construction for various photographic and videographic applications.

സുരക്ഷിതവും ഒപ്റ്റിമൽ പ്രകടനവും ഉറപ്പാക്കാൻ ഉൽപ്പന്നം ഉപയോഗിക്കുന്നതിന് മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിക്കുക.

പാക്കേജ് ഉള്ളടക്കം

അൺപാക്ക് ചെയ്യുമ്പോൾ, താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Vanguard Veo 3 264APS Tripod
• VEO PH-38S Ball Joint (pre-attached)
• QS-74 Quick Release Shoe
• പ്രീമിയം വഹിക്കുന്ന കേസ്
• Low Angle Adapter

Image: The Vanguard Veo 3 264APS tripod fully assembled, showcasing its robust aluminum legs and the VEO PH-38S ball joint.

സജ്ജമാക്കുക

1. ട്രൈപോഡ് കാലുകൾ നീട്ടുന്നു

   Release the leg locks on each section of the tripod legs. Extend the legs to the desired height. Ensure all leg locks are securely fastened after adjustment. The tripod features four sections with improved 26mm legs for stability.

   

   ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the leg lock mechanism on the Vanguard Veo 3 264APS tripod, designed for secure and easy adjustment.

2. ലെഗ് ആംഗിളുകൾ ക്രമീകരിക്കുന്നു

   Each leg can be independently adjusted to three different angles. Press the angle adjustment tab at the top of each leg to select the desired spread. This allows for stable positioning on uneven terrain or for achieving low-angle shots.

3. Leveling the Tripod

   Utilize the integrated bubble level located on the tripod canopy to ensure the tripod base is perfectly level before mounting your camera. The VEO PH-38S ball joint also includes an additional bubble level for fine-tuning.

   

   ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the bubble level integrated into the tripod's canopy, essential for ensuring a perfectly level setup.

4. ക്യാമറ ഘടിപ്പിക്കുന്നു

   The VEO PH-38S ball joint comes with an Arca-compatible QS-74 quick release shoe. Attach the QS-74 shoe to the base of your camera or lens collar. Then, slide the shoe into the clamp on the ball joint and secure it by tightening the locking knob. Ensure the safety pin engages for added security.

Operating the Tripod

1. Using the VEO PH-38S Ball Joint

   The VEO PH-38S is a 2-way and 3-way panoramic ball joint. It features two levers for independent movement control:

   • തിരശ്ചീന പാൻ: Loosen the lower lever to rotate the head horizontally for panoramic shots. The numbered base assists in precise adjustments.
   • ലംബ ചെരിവ്: Loosen the upper lever to tilt the camera vertically.
   • Combined Movement: When both levers are loosened, the head allows for full 3-way movement. Tighten both levers to lock the position securely.

   The upper handle grip can be rotated in 90° segments to position the levers comfortably for both right-handed and left-handed users, and to adjust for unstable terrain.

2. Monopod Conversion

   One of the tripod legs can be quickly converted into a monopod. To do this:

   1. Unscrew the designated leg (usually marked) from the tripod canopy.
   2. Remove the center column with the ball joint attached from the tripod canopy.
   3. Attach the center column (with ball joint) to the top of the detached leg.

   This provides a stable monopod for quick action shots or situations where a full tripod is not feasible.

3. Low Angle Photography

   For extremely low-angle shots, you can use the included low angle adapter. Alternatively, the center column can be reversed and inserted upside down into the tripod canopy, allowing the camera to be positioned very close to the ground.

4. ആക്സസറി അറ്റാച്ച്മെന്റ്

   The tripod canopy features two 3/8" threads. These threads allow for the attachment of support arms or other accessories, expanding the versatility of your setup.

   

   Image: The Vanguard Veo 3 264APS tripod supporting a camera and an additional accessory arm, demonstrating its versatility for multiple attachments.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Regularly clean the tripod, especially the leg locks, to prevent dirt and debris from affecting their operation. Use a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by thorough drying.
• ലൂബ്രിക്കേഷൻ: The leg closures are designed for easy cleaning and maintenance. Avoid applying excessive lubricants unless specifically recommended by the manufacturer, as this can attract dirt.
• സംഭരണം: Store the tripod in its premium carrying case in a dry, cool environment when not in use to protect it from dust and moisture.
• പരിശോധന: Periodically inspect all screws, joints, and moving parts for tightness and wear. Tighten any loose screws carefully.

ട്രബിൾഷൂട്ടിംഗ്

• കാലുകൾ സുഗമമായി നീട്ടാത്തതോ പിൻവാങ്ങാത്തതോ: Check for dirt or sand in the leg locks. Clean thoroughly as described in the Maintenance section. Ensure locks are fully disengaged.
• Ball joint movement is stiff or loose: Ensure all locking levers are properly engaged or disengaged. If stiff, check for debris. If consistently loose, ensure the camera is within the specified load capacity.
• ട്രൈപോഡ് അസ്ഥിരത: Ensure all leg sections are fully extended and locked, and leg angles are set appropriately for the terrain. Verify the camera is securely mounted on the quick release shoe.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Vanguard products are manufactured to high-quality standards. For specific warranty information regarding your Veo 3 264APS tripod, please refer to the warranty card included with your purchase or visit the official Vanguard webസൈറ്റ്.

For technical support, spare parts, or service inquiries, please contact Vanguard customer service through their official channels. Keep your purchase receipt and product model number handy for faster assistance.