XYZprinting Open Smart Tag ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

The XYZprinting Open Smart Tag is an NFC chip designed to enable compatibility with third-party filaments on select XYZprinting 3D printers. This device allows users to expand their material options beyond proprietary filaments, offering greater versatility and choice for 3D printing projects. It integrates seamlessly to provide a reliable and efficient printing experience with a wider range of materials.

പ്രധാന സവിശേഷതകൾ:

• Third-Party Filament Compatibility: Unlocks the ability to use filaments from various brands.
• ദ്രുത ഇൻസ്റ്റാളേഷൻ: Designed for straightforward setup on your filament spool and registration with the printer.
• Spool Size Versatility: Supports a wide range of filament spool sizes, from 600g to larger capacities.
• Broad Printer Compatibility: Compatible with da Vinci nanoSeries, miniSeries, Jr. Series, and Color Series printers.
• Wide Material Support: Enables use of various filament types including PLA, PETG, ABS, and Carbon-infused materials.

2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Open Smart Tag device (Model: RSFLAXUS00F)
• Mounting hardware (if applicable, typically a screw for attachment)

ചിത്രം 1: മുൻഭാഗം view of the Open Smart Tag device. This image shows the white plastic housing with two curved arms designed to hold a filament spool, and a central rectangular section containing the NFC chip. A small screw is visible on one side.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to install and register your Open Smart Tag:

1. Attach to Filament Spool: Secure the Open Smart Tag to your third-party filament spool. The design typically allows it to clip or screw onto the spool's core. Ensure it is firmly attached and does not interfere with the spool's rotation.
2. ലോഡ് ഫിലമെൻ്റ്: Load the filament spool with the attached Open Smart Tag into your XYZprinting 3D printer according to your printer's standard filament loading procedure.
3. പവർ ഓൺ പ്രിന്റർ: Turn on your 3D printer and ensure it is connected to the internet (if required for registration).
4. Access Printer Interface: Navigate to the filament management or settings section on your printer's control panel or through the associated software.
5. Register Smart Tag:
   • Locate the option to "Register Smart Tag" or "Add New Filament." This may be found by clicking on a question mark icon next to the filament status or a similar prompt.
   • The printer will attempt to read the NFC chip on the Open Smart Tag. ഉറപ്പാക്കുക tag is positioned correctly for the printer's NFC reader.
   • കുറിപ്പ്: Some users have reported that with newer software versions (e.g., 2023 software), you might need to try clicking the registration prompt multiple times or ensure the printer is directly connected via USB/Ethernet for successful registration if experiencing "printer reacted too slow" errors.
6. ഫിലമെന്റ് തരം തിരഞ്ഞെടുക്കുക: Once recognized, you will be prompted to select the type of filament (e.g., PLA, PETG, ABS) and potentially other parameters like diameter and color. Configure these settings to match your third-party filament.
7. സ്ഥിരീകരണം: The printer should confirm successful registration and display the new filament information.

ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the Open Smart Tag, highlighting the label with "OPEN SMART TAG" and "Model No.: RSFLA". This image provides a clearer view of the central NFC module and its identification markings.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the Open Smart Tag is installed and registered, your XYZprinting 3D printer will treat the third-party filament as a recognized material. You can then proceed with your printing tasks as usual.

1. 3D മോഡൽ തയ്യാറാക്കുക: Use your preferred slicing software (e.g., XYZprint, Cura, Simplify3D) to prepare your 3D model for printing.
2. Select Filament Profile: In the slicing software, ensure you select the correct filament profile that matches the third-party material you are using (e.g., PLA, PETG). Adjust print settings (temperature, speed, retraction) as recommended by the filament manufacturer.
3. പ്രിൻ്റ് ആരംഭിക്കുക: Send the sliced G-code to your printer and initiate the print job. The printer will now utilize the third-party filament as enabled by the Open Smart Tag.
4. മോണിറ്റർ പ്രിന്റ്: Observe the initial layers of your print to ensure proper adhesion and extrusion. Adjust settings if necessary.

പ്രധാനപ്പെട്ടത്: Always refer to the specific recommendations of your third-party filament manufacturer for optimal printing temperatures and speeds. The Open Smart Tag facilitates the use of these materials but does not automatically configure all print settings.

5. പരിപാലനം

The Open Smart Tag requires minimal maintenance. To ensure its longevity and proper function:

• വൃത്തിയായി സൂക്ഷിക്കു: Periodically wipe the device with a dry, soft cloth to remove dust or filament debris. Avoid using harsh chemicals or abrasive materials.
• ശാരീരിക നാശം ഒഴിവാക്കുക: Handle the Smart Tag carefully to prevent cracks or damage to the NFC chip.
• ശരിയായ സംഭരണം: When not in use, store the Smart Tag in a dry, cool environment, away from direct sunlight or extreme temperatures.
• കണക്ഷൻ പരിശോധിക്കുക: ഉറപ്പാക്കുക tag remains securely attached to the filament spool during printing to prevent dislodgement.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues while using the Open Smart Tag, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും കാണുക:

• സ്മാർട്ട് Tag Not Recognized:
  • സ്മാർട്ട് ഉറപ്പാക്കുക Tag is correctly and securely attached to the filament spool.
  • Verify that the filament spool with the tag is properly loaded into the printer.
  • Check your printer's software/firmware version. If it's a newer version, you might need to try clicking the "Register Smart Tag" prompt multiple times.
  • Ensure your printer has a stable internet connection or is connected via USB/Ethernet during registration, as connectivity issues can sometimes cause "printer reacted too slow" errors.
  • Restart the printer and attempt the registration process again.
• Filament Not Extruding/Poor Print Quality:
  • This is often related to incorrect print settings for the specific third-party filament. Double-check the recommended nozzle temperature, bed temperature, and print speed from the filament manufacturer.
  • Ensure the filament is loaded correctly and not tangled.
  • Perform a nozzle cleaning or cold pull if you suspect a clog.
• Printer Displays "Proprietary Filament Required" Error:
  • This indicates the Smart Tag was not successfully registered or is no longer recognized. Repeat the registration steps in Section 3.
  • സ്മാർട്ട് ഉറപ്പാക്കുക Tag itself is not damaged.

If problems persist, contact XYZprinting customer support or refer to their official support resources.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please visit the official XYZprinting webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

XYZprinting Official Webസൈറ്റ്: www.xyzprinting.com