സ്മാർട്ട്‌ലൈറ്റ് ഇൻഡിക്കേറ്ററുള്ള ബ്രിട്ട ലാർജ് 10-കപ്പ് വാട്ടർ ഫിൽറ്റർ പിച്ചർ (മോഡൽ OB46/OB03) ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the proper setup, operation, and maintenance of your Brita Large 10-Cup Water Filter Pitcher. Designed to provide cleaner, great-tasting tap water, this pitcher features a SmartLight indicator for convenient filter tracking and is made without BPA.

Image 1.1: Brita Large 10-Cup Water Filter Pitcher with included filter and packaging.

2. സജ്ജീകരണം

1. ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: Remove all parts from the packaging: pitcher, lid, and filter.
2. Wash Pitcher: Hand-wash the pitcher and lid with mild detergent and rinse thoroughly. Do not wash the filter in a dishwasher.
3. ഫിൽറ്റർ തയ്യാറാക്കുക: Submerge the new Brita Standard filter in cold water for 15 seconds to remove loose carbon particles and air bubbles.
4. ഫിൽട്ടർ ചേർക്കുക: Align the groove on the filter with the ridge in the pitcher's reservoir. Press the filter firmly into the reservoir until it clicks into place.
5. പ്രാരംഭ ഫിൽട്രേഷൻ: Fill the reservoir with cold tap water. Discard the first two pitchers of filtered water or use them for plants. This primes the filter.

Image 2.1: Proper insertion of the Brita Standard filter into the pitcher's reservoir.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. കുടം നിറയ്ക്കൽ: Open the easy-fill lid. Place the pitcher under a cold water tap and fill the reservoir. The water will filter through to the main pitcher compartment.
2. Filtering Process: Allow the water to pass through the filter completely before pouring. This ensures optimal filtration.
3. വെള്ളം ഒഴിക്കൽ: Once filtered, simply tilt the pitcher to pour clean water from the spout.

Image 3.1: Demonstrating how to pour filtered water from the pitcher.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

Regular cleaning of your Brita pitcher is recommended. Hand-wash all parts (except the filter) with mild soap and water. Rinse thoroughly. The pitcher is not dishwasher safe.

4.2 ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ

For best results, replace your Brita Standard water filter every 40 gallons or approximately every 2 months. The SmartLight indicator on the lid will help you track filter life.

Image 4.1: A Brita Standard water filter, ready for replacement.

5. SmartLight Indicator

The Brita SmartLight indicator on the lid provides a visual cue for when to change your filter:

• ഗ്രീൻ ലൈറ്റ്: Filter is in good condition.
• മഞ്ഞ വെളിച്ചം: Filter needs to be changed soon. Prepare a new filter.
• ചുവന്ന വെളിച്ചം: Filter needs to be changed. Replace the filter immediately for optimal performance.

To reset the SmartLight indicator after replacing the filter, press and hold the reset button on the lid for 5 seconds until the green light flashes.

Image 5.1: The SmartLight indicator on the Brita pitcher lid.

6. പ്രശ്‌നപരിഹാരം

• സ്ലോ ഫിൽട്രേഷൻ: Ensure the filter is properly seated. If the issue persists, the filter may be clogged and require replacement.
• Water Taste/Odor: If the filtered water still has an undesirable taste or odor, ensure the filter was properly primed (discarding the first two pitchers). If the problem continues, replace the filter.
• SmartLight Indicator Not Working: Check if the battery is depleted. Some models have replaceable batteries. If not, contact customer support.
• വെള്ളം ചോർച്ച: Verify that all components, especially the filter and lid, are correctly assembled and securely in place.

7 സ്പെസിഫിക്കേഷനുകൾ

Image 7.1: Visual representation of the pitcher's dimensions.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the official Brita webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

നിർമ്മാതാവ്: ബ്രിട്ട

ആദ്യം ലഭ്യമായത്: ജൂലൈ 21, 2022