ROBOTIME TG604K 3D Wooden Violin Capriccio Model Kit

1. ആമുഖം

This manual provides detailed instructions for assembling your ROBOTIME TG604K 3D Wooden Violin Capriccio Model Kit. This kit allows you to construct a classic violin model from 62 pre-cut wooden pieces. The assembly process is designed to be engaging and does not require glue. Upon completion, the model measures approximately 5.7 x 2.9 x 5.9 inches.

The kit is suitable for individuals aged 8 years and up, promoting hand-eye coordination, problem-solving skills, and creative thinking.

2 സുരക്ഷാ വിവരങ്ങൾ

• ചെറിയ ഭാഗങ്ങൾ മുന്നറിയിപ്പ്: This kit contains small parts which may pose a choking hazard for young children. Keep out of reach of children under 3 years old.
• മൂർച്ചയുള്ള അഗ്രങ്ങൾ: While pieces are pre-cut, some edges may be sharp. Handle with care during assembly.
• മെറ്റീരിയൽ സുരക്ഷ: The wooden pieces are made from high-quality, recyclable safety materials. Avoid ingestion.
• മുതിർന്നവരുടെ മേൽനോട്ടം: Adult supervision is recommended, especially for younger assemblers.

3. പാക്കേജ് ഉള്ളടക്കം

Your ROBOTIME TG604K kit includes the following components:

• 62 pre-cut wooden pieces
• Detailed instruction manual with diagrams
• Additional accessories (e.g., sandpaper, small tools if applicable, though not explicitly listed, it's common for these kits)

4. സജ്ജീകരണവും തയ്യാറെടുപ്പും

1. അൺപാക്ക്: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
2. പരിശോധിക്കുക: Check all wooden sheets for any damaged or missing pieces. Contact customer support if issues are found.
3. സംഘടിപ്പിക്കുക: Lay out the numbered wooden sheets and the instruction manual on a clean, flat, and well-lit workspace.
4. ഉപകരണങ്ങൾ: No special tools or glue are required for assembly. However, a small piece of sandpaper (often included) can be useful for smoothing edges, and a craft knife or tweezers may assist with delicate parts.
5. Pre-soak (Optional for bendable parts): For any wooden pieces that require bending, it is recommended to soak them in water for a short period to increase flexibility and prevent breakage. Refer to the specific instructions for such pieces.

5. അസംബ്ലി നിർദ്ദേശങ്ങൾ

Follow the step-by-step diagrams and instructions provided in the included manual. Each wooden piece is numbered for easy identification. Assemble the model by carefully detaching pieces from their sheets and interlocking them as indicated.

• Detaching Pieces: Gently push out the pre-cut pieces. If a piece is stubborn, use a craft knife to carefully cut the small connecting points.
• Interlocking: Align the tabs and slots of the pieces and press them together firmly but gently. Do not force pieces, as this may cause breakage.
• അസംബ്ലി ക്രമം: Adhere strictly to the numbered steps in the instruction manual to ensure correct construction.
• No Glue Required: The design utilizes precise interlocking mechanisms, eliminating the need for adhesives.

For a visual guide on assembling ROBOTIME musical instrument models, please refer to the video below:

6. പ്രവർത്തനവും പ്രദർശനവും

The ROBOTIME Violin Capriccio Model is a static display item. Once assembled, it can be placed on any flat surface as a decorative piece. Ensure it is placed in a stable location to prevent accidental falls.

7. പരിപാലനം

• വൃത്തിയാക്കൽ: Dust the model regularly with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as these may damage the wood.
• സംഭരണം: If disassembling for storage, do so carefully to avoid breaking pieces. Store in a dry place away from direct sunlight and extreme temperatures to prevent warping or fading.
• കൈകാര്യം ചെയ്യൽ: Handle the assembled model gently to prevent delicate parts from breaking.

8. പ്രശ്‌നപരിഹാരം

• തകർന്ന കഷണങ്ങൾ: If a piece breaks during assembly, attempt to repair it with wood glue if necessary. If the piece is essential and irreparable, contact customer support for assistance.
• കാണാതായ ഭാഗങ്ങൾ: In the event of missing components, refer to the "After-Sale Service" section for contact information to request replacements.
• Difficulty with Bending: If a piece needs to be bent and feels too rigid, try soaking it in warm water for a few minutes to make it more pliable before attempting to bend it again.
• യോജിക്കാത്ത കഷണങ്ങൾ: Ensure you are using the correct numbered pieces for each step. Do not force pieces; gently sand edges if there is slight resistance, but avoid removing too much material.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

ROBOTIME is committed to customer satisfaction. If you encounter any questions during assembly, or if you find damaged or missing parts in your kit, please do not hesitate to contact our customer service team.

We aim to respond to all inquiries within 24 hours and provide prompt assistance to resolve any issues you may experience.

For support, please refer to the contact information provided on the product packaging or the official ROBOTIME webസൈറ്റ്.