Prity K1 Wood Stove 9.5 kW User Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Prity K1 Wood Stove. The Prity K1 is an economical and efficient solid fuel stove, designed to provide comfortable heating for your home. It is characterized by its robust construction, aesthetic design, and high thermal efficiency.

Key features include a reinforced combustion chamber with refractory bricks for heat accumulation, a heat-resistant ceramic glass door, a durable cast iron grate, and manual dampers for precise control over combustion. The stove also features an integrated compartment for wood storage.

ചിത്രം 1.1: ഫ്രണ്ട് view of the Prity K1 Wood Stove with a visible fire in the combustion chamber. The stove is black with a top flue connection and a lower storage compartment.

The Prity K1 Wood Stove has a nominal heat output of 9.5 kW and an efficiency of 77.8%, capable of heating an area of approximately 52 m². It operates using wood or coal as fuel.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read all safety instructions carefully before installing or operating the stove. Failure to follow these instructions may result in property damage, personal injury, or death.

• പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: Installation must be performed by a qualified professional and comply with all local and national building and fire safety codes.
• കത്തുന്ന വസ്തുക്കൾ: Maintain minimum clearances to combustible materials.

ചിത്രം 2.1: Diagram illustrating the required safety distances from combustible materials for the Prity K1 Wood Stove. The distances are specified as 40 cm to the rear, 40 cm to the sides, and 80 cm to the front.

• ഇന്ധനം: Only use recommended solid fuels (dry wood with moisture content ≤ 20%, or coal). Never use flammable liquids, trash, or treated wood.
• വെൻ്റിലേഷൻ: Ensure adequate ventilation in the room where the stove is installed to prevent carbon monoxide buildup.
• മേൽനോട്ടം: Never leave the stove unattended while in operation. Keep children and pets away from the hot surfaces.
• ചൂടുള്ള പ്രതലങ്ങൾ: The stove surfaces become very hot during operation. Use protective gloves when handling the stove or adding fuel.
• ചിമ്മിനി: Ensure the chimney is clean and in good condition. Regular chimney sweeping is crucial to prevent creosote buildup and chimney fires.
• ചാരം നീക്കം ചെയ്യൽ: Dispose of ashes in a metal container with a tight-fitting lid, away from combustible materials.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Prity K1 Wood Stove requires assembly. It is strongly recommended that installation be carried out by a certified professional to ensure compliance with all safety standards and optimal performance.

3.1 അൺപാക്കിംഗും പരിശോധനയും

• Carefully unpack the stove and all components.
• Inspect for any damage that may have occurred during transit. Contact your supplier immediately if any damage is found.
• പാക്കിംഗ് ലിസ്റ്റിൽ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഭാഗങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.

3.2 പ്ലേസ്മെൻ്റ്

• Place the stove on a non-combustible floor protector if the floor is combustible.
• Adhere strictly to the minimum clearances to combustible materials as specified in Section 2 (Rear: 40 cm, Sides: 40 cm, Front: 80 cm).

3.3 ഫ്ലൂ കണക്ഷൻ

• The stove is designed for a top flue connection.
• The flue pipe diameter required is 130 mm.
• Ensure all flue pipe connections are sealed properly to prevent smoke leakage.
• The chimney system must be suitable for solid fuel appliances and meet local regulations.

ചിത്രം 3.1: വശം view of the Prity K1 Wood Stove with overall dimensions labeled. The height is 76 cm, width is 38 cm, and depth is 45 cm.

4. ഓപ്പറേഷൻ

Operating your Prity K1 Wood Stove effectively involves proper fuel selection, ignition, and air control.

4.1 ഇന്ധനം

• The Prity K1 is designed to burn dry wood (moisture content ≤ 20%) and coal.
• Using dry, seasoned wood ensures optimal heat output and minimizes creosote buildup.
• Avoid burning wet wood, treated wood, plastics, or household waste, as these can damage the stove, create excessive smoke, and pose health risks.

4.2 ജ്വലനം

• മുൻവശത്തെ എയർ സപ്ലൈ രണ്ടും തുറക്കുക dampഎർ, പുക ഡിampപൂർണ്ണമായും.
• കാസ്റ്റ് ഇരുമ്പ് ഗ്രേറ്റിൽ ചുരുണ്ട കടലാസ് അല്ലെങ്കിൽ പ്രകൃതിദത്ത ഫയർലൈറ്ററുകൾ വയ്ക്കുക.
• Stack small pieces of kindling wood on top of the firelighters.
• Light the firelighters and close the combustion chamber door once the kindling is burning steadily.
• Gradually add larger pieces of wood as the fire establishes.

4.3 എയർ കൺട്രോൾ

സ്റ്റൗവിൽ രണ്ട് മാനുവൽ ഡിampers for regulating combustion:

• Front Air Supply Damper: Controls the primary air intake, which feeds oxygen to the base of the fire. Open for faster burning and higher heat, close partially for slower burning.
• സ്മോക്ക് ഡിamper: Regulates the intensity of the flames and the draft through the chimney. Adjust to achieve optimal burning and prevent excessive heat loss up the chimney.

ഡി ക്രമീകരിക്കുകampers to achieve a steady, bright flame. Too much air will cause the fuel to burn too quickly, while too little air will result in a smoldering fire, increased smoke, and creosote buildup.

5. പരിപാലനം

Regular maintenance ensures the longevity and safe operation of your Prity K1 Wood Stove.

5.1 ആഷ് നീക്കം

• Remove ashes regularly from the ash pan beneath the grate. Do not allow ash to build up and touch the bottom of the grate, as this can restrict airflow and damage the grate.
• Always ensure the stove is completely cool before removing ashes.
• Dispose of ashes in a non-combustible metal container with a lid, and store away from any flammable materials.

5.2 Cleaning the Combustion Chamber and Glass

• Periodically clean the interior of the combustion chamber to remove any soot or creosote buildup.
• The ceramic glass door can be cleaned with a specialized stove glass cleaner when the stove is cold. Avoid abrasive cleaners that could scratch the glass.

5.3 ചിമ്മിനി വൃത്തിയാക്കൽ

• The chimney and flue pipe should be inspected and cleaned at least once a year, or more frequently depending on usage and fuel type.
• This task should be performed by a certified chimney sweep to ensure safety and compliance.

5.4 Seals and Components

• Regularly inspect the door seals for wear and tear. Worn seals can lead to air leaks, reducing efficiency and potentially allowing smoke into the room. Replace seals as needed.
• Check the condition of the refractory bricks inside the combustion chamber. Replace any cracked or broken bricks to maintain efficiency and protect the stove body.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your Prity K1 Wood Stove.

7 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the Prity K1 Wood Stove.

ചിത്രം 7.1: English table detailing product information for the Prity K1, including fuel type, energy efficiency, heat output, flue gas temperature, and dimensions.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, spare parts, or technical support, please contact the manufacturer directly.

• നിർമ്മാതാവ്: പ്രിറ്റി
• Webസൈറ്റ്: www.prity-bg.com
• ഇമെയിൽ: prity95@live.com
• ഫോൺ: +359 884 941 948
• സ്പെയർ പാർട്സ് ലഭ്യത: വിവരങ്ങൾ ലഭ്യമല്ല.