SCULPFUN S10 ലേസർ എൻഗ്രേവർ ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the safe and effective operation of your SCULPFUN S10 Laser Engraver. The SCULPFUN S10 is a versatile laser engraving and cutting machine designed for precision work on a variety of materials, including wood, metal, and acrylic. It features a powerful 10W diode laser and an integrated air assist system for enhanced performance.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Laser Class IV. Avoid direct exposure to the laser beam. Always wear appropriate laser safety goggles when operating the machine. Never leave the machine unattended during operation.

• Ensure proper ventilation in the work area to dissipate fumes and smoke.
• കത്തുന്ന വസ്തുക്കൾ ലേസർ എൻഗ്രേവറിൽ നിന്ന് അകറ്റി നിർത്തുക.
• ഏതെങ്കിലും ഘടകങ്ങൾക്ക് കേടുപാടുകൾ സംഭവിച്ചാലോ നഷ്ടപ്പെട്ടാലോ മെഷീൻ പ്രവർത്തിപ്പിക്കരുത്.
• ഓപ്പറേഷൻ ഏരിയയിൽ നിന്ന് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
• അടിയന്തര ഷട്ട്ഡൗൺ നടപടിക്രമങ്ങൾ സ്വയം പരിചയപ്പെടുത്തുക.

3. പാക്കേജ് ഉള്ളടക്കം

Verify that all components are present in your SCULPFUN S10 package:

• SCULPFUN S10 Laser Engraver Frame
• 10W Diode Laser Module
• Air Assist Nozzle and Hose
• Laser Honeycomb Pad
• Power Adapter (100-240V AC, 50/60Hz input; 12V 5A output)
• യുഎസ്ബി കണക്ഷൻ കേബിൾ
• Fixed Focus Column
• സുരക്ഷാ കണ്ണടകൾ
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• അസംബ്ലി ഉപകരണങ്ങളും സ്ക്രൂകളും

Figure 3.1: SCULPFUN S10 Laser Engraver with included Air Assist and Honeycomb Pad.

4. സജ്ജീകരണം

4.1 അസംബ്ലി

Follow the detailed assembly instructions provided in the separate assembly guide or video. Ensure all screws are tightened securely and cables are properly connected. The industrial-grade X-axis linear slide ensures high precision and stability.

Figure 4.1: Key features of the SCULPFUN S10, including the 10W laser and linear rail slide.

4.2 Air Assist Connection

The SCULPFUN S10 features a high-speed air assist nozzle. Connect an external air compressor (recommended: 30L/min, 0.03Mpa with 8mm outer diameter air outlet interface) to the auxiliary air hose (inner diameter: 7.5mm/0.29"). This significantly improves cutting performance and reduces residue.

Figure 4.2: Dimensions of the recommended SCULPFUN Air Pump for optimal air assist.

Figure 4.3: Proper connection and adjustment of the air assist system.

4.3 സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റലേഷൻ

The SCULPFUN S10 supports various operating software, including LaserGRBL and LightBurn, compatible with Windows and MAC systems. Install the necessary drivers and software as per the instructions provided with your chosen software. Data transfer is primarily via USB connection.

5. Operating the Laser Engraver

5.1 മെറ്റീരിയൽ അനുയോജ്യത

The SCULPFUN S10 is capable of engraving and cutting a wide range of materials:

• കൊത്തുപണി സാമഗ്രികൾ: All kinds of wood (including walnut, cherry, and other high-density wood), MDF, bamboo, cardboard, plastic, leather, PCB board, alumina, 304 stainless steel, ceramic, dark stone.
• കട്ടിംഗ് മെറ്റീരിയലുകൾ: All kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo, leather, some plastic boards, PCB boards.

പിന്തുണച്ചു file formats include NC, BMP, JPG, PNG, DXF, and other image formats.

5.2 Focusing Method

The S10 uses a fixed focus column with a sliding device for precise focusing. Refer to your software's guide for optimal focus settings for different materials and thicknesses.

5.3 Enhancing Performance with Air Assist

The air assist system significantly improves cutting speed and cleanliness by accelerating residue removal. This results in cleaner cuts with less charring, especially on thicker materials.

5.4 Using the Honeycomb Pad

The included laser honeycomb pad protects your work surface and improves cutting results by allowing smoke and debris to pass through, minimizing back-reflection and charring on the underside of the material.

Figure 5.1: The SCULPFUN Honeycomb Pad, measuring 400x400mm (15.75x15.75 inches), designed to protect your desktop and improve cutting quality.

Figure 5.2: The laser engraver positioned over the honeycomb pad, which is placed on a desktop protection board to prevent laser damage to the table.

6. പരിപാലനം

• Regularly clean the laser lens and nozzle to ensure optimal performance and prevent residue buildup.
• Inspect the X-axis linear slide and belts for any debris or wear. Keep the rails clean and lubricated if necessary.
• എല്ലാ വൈദ്യുത കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും കേടുപാടുകൾ കൂടാതെയാണെന്നും ഉറപ്പാക്കുക.
• Store the laser engraver in a clean, dry environment when not in use.

7. പ്രശ്‌നപരിഹാരം

• ലേസർ വെടിവയ്ക്കുന്നില്ല: Check power connection, USB connection, and ensure the laser module is properly seated. Verify software settings for laser power and mode.
• മോശം കൊത്തുപണി/മുറിക്കൽ നിലവാരം: Adjust laser focus, power, and speed settings in your software. Ensure the material is flat and properly secured. Clean the laser lens and nozzle. Verify air assist is functioning correctly.
• യന്ത്രം ചലിക്കുന്നില്ല: Check power and USB connections. Ensure the software is connected to the machine and sending commands. Inspect belts for tension and proper alignment.
• സോഫ്റ്റ്‌വെയർ കണക്ഷൻ പ്രശ്നങ്ങൾ: Reinstall drivers or software. Try a different USB port or cable.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

SCULPFUN products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact SCULPFUN customer service through their official website or the retailer where you purchased the product. Please have your product model (S10) and purchase details ready when contacting support.