ആമുഖം
Thank you for choosing the SKS Germany Air X-Plorer 10.0 Floor Pump. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new floor pump. Please read these instructions carefully before first use and retain them for future reference.
ഉൽപ്പന്ന സവിശേഷതകൾ
- പരമാവധി മർദ്ദം: 144 psi / 10 bar, suitable for various tire types.
- വാൽവ് അനുയോജ്യത: Equipped with the new MV EASY head, compatible with Presta, Schrader, and Dunlop valves.
- വായുവിൻ്റെ അളവ്: Delivers 476cc of air pressure per stroke for efficient inflation.
- അളവുകൾ: Height 710mm, Hose Length 1200mm, Gauge 63mm for clear pressure readings.
- നിർമ്മാണം: Features a durable steel tube, stable steel base, and a comfortable soft-touch grip.
- ഉത്ഭവം: Manufactured in Germany, ensuring quality and precision.
ചിത്രം 1: ഫ്രണ്ട് view of the SKS Germany Air X-Plorer 10.0 Floor Pump, showcasing its design and integrated pressure gauge.
സജ്ജമാക്കുക
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the pump from its packaging. Inspect for any signs of damage.
- പ്ലേസ്മെൻ്റ്: Place the pump on a flat, stable surface. Ensure the base is fully supported to prevent tipping during use.
- ഹോസ് മാനേജ്മെന്റ്: The hose is typically stored securely on the pump. Unclip it from its storage position before use.
ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the pump, showing the hose neatly stored and the stable base.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. Preparing the Tire Valve
- പ്രെസ്റ്റ വാൽവ്: ചെറിയ kn അഴിക്കുകurled nut at the top of the valve stem. Press down briefly to release a small amount of air, ensuring the valve is open.
- ഷ്രാഡർ വാൽവ്: No special preparation is needed.
- Dunlop Valve: Ensure the valve cap is removed.
2. Attaching the MV EASY Head
The MV EASY head is designed for universal compatibility. It automatically adapts to Presta, Schrader, and Dunlop valves.
- Push the MV EASY head firmly onto the tire valve.
- Flip the orange lever on the MV EASY head to the locked position (usually perpendicular to the valve stem) to secure it.
ചിത്രം 3: ക്ലോസ് അപ്പ് view of the MV EASY valve head, showing its design for universal valve compatibility.
ചിത്രം 4: വശം view of the MV EASY valve head, highlighting the orange locking lever in its open position.
3. Inflating the Tire
- Place your feet on the pump's base to stabilize it.
- Hold the handle firmly and push it down smoothly and completely.
- Pull the handle back up to its full extension. Repeat this pumping motion.
- Monitor the pressure gauge on the base of the pump. Inflate the tire to the recommended pressure specified by the tire manufacturer (usually found on the tire sidewall).
4. Detaching the MV EASY Head
- Once the desired pressure is reached, flip the orange lever on the MV EASY head back to the unlocked position.
- Carefully pull the head straight off the valve stem.
- For Presta valves, screw the knurled nut back down to seal the valve. Replace any valve caps.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Wipe the pump body and hose with a damp cloth after use to remove dirt and grime. Avoid harsh chemicals.
- Hose and Head Inspection: Periodically check the hose for cracks or damage and the valve head for wear. Replace if necessary to ensure optimal performance.
- സംഭരണം: Store the pump in a dry place, away from direct sunlight and extreme temperatures. Ensure the hose is neatly stored to prevent kinks.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Pump not inflating tire. | Valve head not properly attached or locked. Valve stem not open (Presta). | Ensure the MV EASY head is pushed firmly onto the valve and the orange lever is in the locked position. For Presta valves, ensure the knurled nut is unscrewed and briefly pressed. |
| Air leaks from valve head during pumping. | Improper attachment. Worn valve head seal. | Re-attach the MV EASY head, ensuring a tight seal and locked lever. Inspect the rubber seal inside the valve head for wear and replace if necessary. |
| Pressure gauge not registering. | Valve head not properly attached. Gauge malfunction. | Verify proper valve head attachment. If the issue persists, contact customer support. |
| Pump handle feels loose or sticky. | Internal lubrication needed or internal component wear. | Contact customer support for guidance on internal maintenance or repair. |
സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | എസ്.കെ.എസ് |
| മോഡലിൻ്റെ പേര് | Air-x-plorer 10.0 |
| ഭാഗം നമ്പർ | 11762 |
| മെറ്റീരിയൽ | അലോയ് സ്റ്റീൽ |
| നിറം | കറുപ്പ് |
| ഇനത്തിൻ്റെ ഭാരം | 4.5 പൗണ്ട് (2.04 കി.ഗ്രാം) |
| പരമാവധി മർദ്ദം | 144 PSI / 10 ബാർ |
| Air Volume per Stroke | 476 സി.സി |
| ഉയരം | 710 മി.മീ |
| ഹോസ് നീളം | 1200 മി.മീ |
| ഗേജ് വ്യാസം | 63 മി.മീ |
| വാൽവ് അനുയോജ്യത | Presta, Schrader, Dunlop (MV EASY head) |
| ഓപ്പറേഷൻ മോഡ് | മാനുവൽ |
| നിർമ്മാതാവ് | SKS Germany |
വാറൻ്റിയും പിന്തുണയും
The SKS Germany Air X-Plorer 10.0 Floor Pump comes with a 2-year manufacturer's defect warranty. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും വൈകല്യങ്ങൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു.
For warranty claims, technical support, or inquiries regarding replacement parts, please contact SKS Germany customer service through their official website or your point of purchase. Please have your proof of purchase and the product model name (Air-x-plorer 10.0) available when contacting support.
