നെർഫ് F7266

Nerf 20,000 Gelfire Rounds Refill with 800 Round Hopper Instruction Manual

മോഡൽ: F7266

ആമുഖം

This manual provides essential instructions for the use and care of your Nerf 20,000 Gelfire Rounds Refill with 800 Round Hopper. These soft, super absorbent polymer projectiles are designed for use with Nerf Pro Gelfire blasters (sold separately) and burst on impact, requiring no cleanup. Please read this manual thoroughly before use to ensure proper operation and safety.

Nerf Gelfire 20,000 rounds and 800-round hopper packaging

Image: The Nerf Gelfire 20,000 rounds refill pack, showing five packets of dehydrated rounds and the 800-round hopper filled with hydrated rounds.

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: ചെറിയ ഭാഗങ്ങൾ സൃഷ്ടിക്കപ്പെടാം. 3 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്കുള്ളതല്ല.

  • കണ്ണും മുഖവും ലക്ഷ്യമാക്കരുത്.
  • Use of eyewear is always required for players and people within range.
  • Use only with Nerf Gelfire blasters and as directed.
  • Use only clean tap water to hydrate Gelfire rounds.
  • Do not freeze or modify rounds.
  • Impact from rounds may cause temporary marks on skin.
  • ഇതൊരു കളിപ്പാട്ടമല്ല.
  • 14 വയസും അതിൽ കൂടുതലുമുള്ളവർക്ക് ശുപാർശ ചെയ്‌തിരിക്കുന്നു.
  • Always read Gelfire blaster instructions before use for important safety information.

പാക്കേജ് ഉള്ളടക്കം

Your Nerf Gelfire Refill package includes:

  • 20,000 Dehydrated Nerf Pro Gelfire Rounds (typically in multiple packets)
  • 1 x 800-Round Capacity Hopper
Nerf Gelfire Refill product box

ചിത്രം: മുൻഭാഗം view of the Nerf Pro Gelfire Hopper + 20,000 Rounds Refill packaging.

സജ്ജമാക്കുക

1. Hydrating Gelfire Rounds

Gelfire rounds are supplied in a dehydrated state and must be hydrated before use. This process typically takes a few hours.

  1. Empty one or more packets of dehydrated Gelfire rounds into a large container.
  2. Add a generous amount of clean tap water to the container, ensuring the rounds are fully submerged.
  3. Allow the rounds to soak for at least 3-4 hours, or until they have expanded to their full size (approximately 7-8mm in diameter). They should feel soft and squishy.
  4. Drain any excess water from the container. The rounds are now ready for use.
Instructions for hydrating Nerf Gelfire rounds

Image: Visual guide showing dehydrated Gelfire rounds in packets transforming into hydrated rounds in cups after adding water.

2. Filling the 800-Round Hopper

The included hopper has an 800-round capacity and is designed for quick loading onto compatible Nerf Pro Gelfire blasters.

  1. Ensure the Gelfire rounds are fully hydrated and excess water has been drained.
  2. Unscrew the cap from the bottom of the 800-round hopper.
  3. Carefully pour the hydrated Gelfire rounds into the hopper until it is full. Do not overfill.
  4. Securely screw the cap back onto the hopper.
Back of Nerf Gelfire Refill packaging showing 800 round hopper

Image: Back of the product packaging, highlighting the 800-round capacity hopper filled with Gelfire rounds.

പ്രവർത്തിക്കുന്നു

Once your Gelfire rounds are hydrated and loaded into the hopper, you can attach the hopper to a compatible Nerf Pro Gelfire blaster (sold separately).

  1. Refer to your specific Nerf Pro Gelfire blaster's instruction manual for details on how to attach the hopper. Typically, the hopper will twist or click into place on the blaster.
  2. Ensure the hopper is securely attached before operating the blaster.
  3. Follow the blaster's instructions for firing. The hydrated Gelfire rounds will burst upon impact with a target.

കുറിപ്പ്: Always wear appropriate eye protection when using Nerf Pro Gelfire blasters and rounds.

മെയിൻ്റനൻസ്

  • Storage of Hydrated Rounds: Hydrated Gelfire rounds can be stored in an airtight container for a limited time to prevent them from drying out. If they begin to shrink, re-submerge them in water.
  • Cleaning the Hopper: After use, the hopper can be rinsed with clean water to remove any residue. Ensure it is completely dry before storing.
  • നീക്കം ചെയ്യൽ: Gelfire rounds are biodegradable. Dispose of used or unwanted rounds responsibly according to local guidelines.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Rounds are not firing correctly.Rounds are not fully hydrated or are too dry.Re-hydrate rounds in water for several hours until fully expanded.
Hopper not attaching to blaster.Incorrect alignment or incompatible blaster model.Ensure correct alignment. Verify your blaster is a Nerf Pro Gelfire model. Consult your blaster's manual.
Rounds are too small or too hard.Insufficient hydration time.Allow rounds to soak for a longer period (up to 4 hours or more) until they reach the correct size and consistency.

സ്പെസിഫിക്കേഷനുകൾ

  • ഉൽപ്പന്ന അളവുകൾ: 2.5 x 4 x 7 ഇഞ്ച്
  • ഇനത്തിൻ്റെ ഭാരം: 5.6 ഔൺസ്
  • മോഡൽ നമ്പർ: F7266
  • നിർമ്മാതാവ് ശുപാർശ ചെയ്യുന്ന പ്രായം: 14 വർഷവും അതിൽ കൂടുതലും
  • റിലീസ് തീയതി: സെപ്റ്റംബർ 1, 2022
  • നിർമ്മാതാവ്: ഹസ്ബ്രോ
  • Rounds Quantity: 20,000 dehydrated rounds
  • ഹോപ്പർ ശേഷി: 800 റൗണ്ടുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or product support, please contact Hasbro customer service directly. Refer to the product packaging or the official Nerf webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.

ഓൺലൈൻ പിന്തുണ: www.hasbro.com

അനുബന്ധ രേഖകൾ - F7266

പ്രീview Nerf Pro Gelfire Legion Blaster: Instructions, Safety, and Operation
Comprehensive guide to the Nerf Pro Gelfire Legion Blaster, covering setup, hydration of Gelfire rounds, firing modes, safety precautions, and storage. Includes official Hasbro product information.
പ്രീview നെർഫ് അൾട്രാ വൺ ബ്ലാസ്റ്റർ: അസംബ്ലി, ലോഡിംഗ്, ഫയറിംഗ് നിർദ്ദേശങ്ങൾ
നെർഫ് അൾട്രാ വൺ മോട്ടോറൈസ്ഡ് ബ്ലാസ്റ്റർ കൂട്ടിച്ചേർക്കുന്നതിനും ലോഡുചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഗൈഡ്, പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങളും ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകളും ഉൾപ്പെടെ.
പ്രീview നെർഫ് ഹൈപ്പർ മാച്ച്-100 ബ്ലാസ്റ്റർ: പ്രവർത്തന, സുരക്ഷാ നിർദ്ദേശങ്ങൾ
നെർഫ് ഹൈപ്പർ മാച്ച്-100 ബ്ലാസ്റ്ററിനായുള്ള സമഗ്രമായ ഗൈഡ്, ലോഡ് ചെയ്യുന്നതെങ്ങനെ, തീയിടാം, ജാമുകൾ നീക്കം ചെയ്യാമോ, ബ്ലാസ്റ്റർ സൂക്ഷിക്കാമോ, പ്രധാനപ്പെട്ട സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവ വിശദമാക്കുന്നു. ബാറ്ററി വിവരങ്ങളും ഉൽപ്പന്ന അനുയോജ്യതയും ഉൾപ്പെടുന്നു.
പ്രീview Ultimate Nerf Stryfe Mod: DIY Speed Control and LED Upgrade Guide
A comprehensive guide to modifying your Nerf Stryfe blaster, enabling custom motor speed control, adding LED indicators, and enhancing its overall performance. This DIY project details disassembly, alteration, painting, electronics integration, and reassembly.
പ്രീview Nerf Pro Stryfe X Dart Blaster: User Manual and Safety Instructions
Comprehensive guide to operating the Nerf Pro Stryfe X Dart Blaster, including charging, loading, firing, safety warnings, and storage. Features detailed instructions for safe play and regulatory information.
പ്രീview നെർഫ് ഡിനോസ്ക്വാഡ് റെക്സ്-ആർampഏജ് ബ്ലാസ്റ്റർ നിർദ്ദേശങ്ങൾ
നെർഫ് ഡിനോസ്ക്വാഡ് റെക്സ്-ആർ പ്രവർത്തിപ്പിക്കുന്നതിനുള്ള നിർദ്ദേശങ്ങൾampലോഡിംഗ്, ഫയറിംഗ്, ജാമുകൾ വൃത്തിയാക്കൽ, ബാറ്ററി വിവരങ്ങൾ എന്നിവയുൾപ്പെടെയുള്ള ഏജ് ബ്ലാസ്റ്റർ.