One For All Samsung TV Replacement Remote Control

മോഡൽ: URC4810

ആമുഖം

The One For All URC4810 is a dedicated replacement remote control designed specifically for Samsung televisions. This remote offers 100% compatibility with all Samsung TV models, providing a seamless and intuitive user experience. It features a quick setup process called SimpleSet and a learning function to transfer commands from your original remote, ensuring you retain all necessary functionalities.

സുരക്ഷാ വിവരങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

One For All URC4810 remote control in its retail packaging.

Image: The One For All URC4810 remote control displayed within its retail packaging, showing the product name and key features.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The URC4810 remote control requires 2x AAA batteries (not included). Follow these steps to install them:

  1. വിദൂര നിയന്ത്രണത്തിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
  2. രണ്ട് AAA ബാറ്ററികൾ ഇടുക, പോസിറ്റീവ് (+) ഉം നെഗറ്റീവ് (-) ടെർമിനലുകളും കമ്പാർട്ടുമെന്റിനുള്ളിലെ അടയാളപ്പെടുത്തലുകളുമായി വിന്യസിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
  3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
വശം view of the One For All URC4810 remote control, showing its slim profile.

ചിത്രം: ഒരു സൈഡ് പ്രോfile view of the One For All URC4810 remote control, illustrating its ergonomic design and the location of the battery compartment seam.

2. SimpleSet Setup

The URC4810 remote features SimpleSet, allowing for quick setup in under 30 seconds. No codes are needed.

  1. Ensure your Samsung TV is turned on.
  2. Point the One For All remote at your Samsung TV.
  3. അമർത്തിപ്പിടിക്കുക ശക്തി button on the One For All remote until your TV turns off. This may take a few seconds.
  4. Once the TV turns off, release the ശക്തി button immediately. The remote is now set up.
  5. Test other functions like Volume Up/Down and Channel Up/Down to confirm full functionality.
ഫ്രണ്ട് view of the One For All URC4810 remote control, showing all buttons.

ചിത്രം: ഒരു നേർരേഖ view of the One For All URC4810 remote control, showcasing its full button layout, including the power button at the top.

3. Learning Feature (Optional)

The learning feature allows you to copy functions from your original Samsung TV remote to the URC4810. This is useful for any specific buttons not covered by the default setup.

  1. Place the One For All remote and your original Samsung remote on a flat surface, facing each other, about 1-2 inches apart.
  2. വൺ ഫോർ ഓൾ റിമോട്ടിൽ, അമർത്തിപ്പിടിക്കുക സജ്ജമാക്കുക button (if available, otherwise refer to the specific manual for learning mode entry, typically a combination of buttons like SHIFT + പഠിക്കുക or similar) until the LED blinks twice and then stays lit.
  3. Press the button on the One For All remote that you wish to program (e.g., a specific app button). The LED will blink rapidly.
  4. On your original Samsung remote, press the corresponding button you want to copy. The LED on the One For All remote will blink twice to confirm successful learning.
  5. Repeat steps 3 and 4 for any other buttons you wish to learn.
  6. ലേണിംഗ് മോഡിൽ നിന്ന് പുറത്തുകടക്കാൻ, സജ്ജമാക്കുക button again (or the button used to enter learning mode). The LED will turn off.
കോണാകൃതിയിലുള്ളത് view of the One For All URC4810 remote control, highlighting its ergonomic design.

ചിത്രം: ഒരു ആംഗിൾ view of the One For All URC4810 remote control, showcasing its comfortable grip and button placement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once set up, the URC4810 remote functions like your original Samsung TV remote. Here are some common button functions:

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the remote.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

If the remote control's range decreases or buttons become unresponsive, it may be time to replace the batteries. Follow the "Battery Installation" steps in the Setup section to replace the old batteries with new AAA alkaline batteries.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
Remote does not work after setup. Incorrect setup or dead batteries. Ensure batteries are correctly inserted and charged. Repeat the SimpleSet process carefully.
ചില ബട്ടണുകൾ പ്രവർത്തിക്കുന്നില്ല. Button not recognized by SimpleSet or not learned. Use the Learning Feature to copy the function from your original remote. Ensure the remote is pointed directly at the TV.
വിദൂര ദൂരം മോശമാണ്. Low batteries or obstruction. Replace batteries. Ensure there are no obstructions between the remote and the TV's IR receiver.
റിമോട്ടിലെ LED പ്രകാശിക്കുന്നില്ല. No batteries or incorrect battery insertion. Check battery orientation and ensure they are new and correctly inserted.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ് എല്ലാവർക്കും വേണ്ടി ഒന്ന്
മോഡൽ നമ്പർ URC4810
അനുയോജ്യമായ ഉപകരണങ്ങൾ Samsung Televisions
പവർ ഉറവിടം ബാറ്ററി പവർ (2x AAA, ഉൾപ്പെടുത്തിയിട്ടില്ല)
നിറം White (Note: Product images show black, but specification states white. Please refer to product packaging for exact color.)
ഇനത്തിൻ്റെ ഭാരം 3.52 ഔൺസ് (ഏകദേശം 100 ഗ്രാം)
ഉൽപ്പന്ന അളവുകൾ (L x W x H) Approx. 4"D x 3"W x 1"H (Note: Dimensions may refer to packaging or a specific part. Actual remote dimensions are typically longer and narrower.)
യു.പി.സി 810209030940

വാറൻ്റിയും പിന്തുണയും

One For All products are designed and manufactured to the highest standards. For information regarding warranty, technical support, or frequently asked questions, please visit the official One For All webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

For the most up-to-date support information, please refer to the manufacturer's official channels:

">

One For All Samsung TV Replacement Remote Control

മോഡൽ: URC4810

ആമുഖം

The One For All URC4810 is a dedicated replacement remote control designed specifically for Samsung televisions. This remote offers 100% compatibility with all Samsung TV models, providing a seamless and intuitive user experience. It features a quick setup process called SimpleSet and a learning function to transfer commands from your original remote, ensuring you retain all necessary functionalities.

സുരക്ഷാ വിവരങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

One For All URC4810 remote control in its retail packaging.

Image: The One For All URC4810 remote control displayed within its retail packaging, showing the product name and key features.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The URC4810 remote control requires 2x AAA batteries (not included). Follow these steps to install them:

  1. വിദൂര നിയന്ത്രണത്തിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
  2. രണ്ട് AAA ബാറ്ററികൾ ഇടുക, പോസിറ്റീവ് (+) ഉം നെഗറ്റീവ് (-) ടെർമിനലുകളും കമ്പാർട്ടുമെന്റിനുള്ളിലെ അടയാളപ്പെടുത്തലുകളുമായി വിന്യസിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
  3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
വശം view of the One For All URC4810 remote control, showing its slim profile.

ചിത്രം: ഒരു സൈഡ് പ്രോfile view of the One For All URC4810 remote control, illustrating its ergonomic design and the location of the battery compartment seam.

2. SimpleSet Setup

The URC4810 remote features SimpleSet, allowing for quick setup in under 30 seconds. No codes are needed.

  1. Ensure your Samsung TV is turned on.
  2. Point the One For All remote at your Samsung TV.
  3. അമർത്തിപ്പിടിക്കുക ശക്തി button on the One For All remote until your TV turns off. This may take a few seconds.
  4. Once the TV turns off, release the ശക്തി button immediately. The remote is now set up.
  5. Test other functions like Volume Up/Down and Channel Up/Down to confirm full functionality.
ഫ്രണ്ട് view of the One For All URC4810 remote control, showing all buttons.

ചിത്രം: ഒരു നേർരേഖ view of the One For All URC4810 remote control, showcasing its full button layout, including the power button at the top.

3. Learning Feature (Optional)

The learning feature allows you to copy functions from your original Samsung TV remote to the URC4810. This is useful for any specific buttons not covered by the default setup.

  1. Place the One For All remote and your original Samsung remote on a flat surface, facing each other, about 1-2 inches apart.
  2. വൺ ഫോർ ഓൾ റിമോട്ടിൽ, അമർത്തിപ്പിടിക്കുക സജ്ജമാക്കുക button (if available, otherwise refer to the specific manual for learning mode entry, typically a combination of buttons like SHIFT + പഠിക്കുക or similar) until the LED blinks twice and then stays lit.
  3. Press the button on the One For All remote that you wish to program (e.g., a specific app button). The LED will blink rapidly.
  4. On your original Samsung remote, press the corresponding button you want to copy. The LED on the One For All remote will blink twice to confirm successful learning.
  5. Repeat steps 3 and 4 for any other buttons you wish to learn.
  6. ലേണിംഗ് മോഡിൽ നിന്ന് പുറത്തുകടക്കാൻ, സജ്ജമാക്കുക button again (or the button used to enter learning mode). The LED will turn off.
കോണാകൃതിയിലുള്ളത് view of the One For All URC4810 remote control, highlighting its ergonomic design.

ചിത്രം: ഒരു ആംഗിൾ view of the One For All URC4810 remote control, showcasing its comfortable grip and button placement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once set up, the URC4810 remote functions like your original Samsung TV remote. Here are some common button functions:

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the remote.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

If the remote control's range decreases or buttons become unresponsive, it may be time to replace the batteries. Follow the "Battery Installation" steps in the Setup section to replace the old batteries with new AAA alkaline batteries.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
Remote does not work after setup. Incorrect setup or dead batteries. Ensure batteries are correctly inserted and charged. Repeat the SimpleSet process carefully.
ചില ബട്ടണുകൾ പ്രവർത്തിക്കുന്നില്ല. Button not recognized by SimpleSet or not learned. Use the Learning Feature to copy the function from your original remote. Ensure the remote is pointed directly at the TV.
വിദൂര ദൂരം മോശമാണ്. Low batteries or obstruction. Replace batteries. Ensure there are no obstructions between the remote and the TV's IR receiver.
റിമോട്ടിലെ LED പ്രകാശിക്കുന്നില്ല. No batteries or incorrect battery insertion. Check battery orientation and ensure they are new and correctly inserted.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ് എല്ലാവർക്കും വേണ്ടി ഒന്ന്
മോഡൽ നമ്പർ URC4810
അനുയോജ്യമായ ഉപകരണങ്ങൾ Samsung Televisions
പവർ ഉറവിടം ബാറ്ററി പവർ (2x AAA, ഉൾപ്പെടുത്തിയിട്ടില്ല)
നിറം White (Note: Product images show black, but specification states white. Please refer to product packaging for exact color.)
ഇനത്തിൻ്റെ ഭാരം 3.52 ഔൺസ് (ഏകദേശം 100 ഗ്രാം)
ഉൽപ്പന്ന അളവുകൾ (L x W x H) Approx. 4"D x 3"W x 1"H (Note: Dimensions may refer to packaging or a specific part. Actual remote dimensions are typically longer and narrower.)
യു.പി.സി 810209030940

വാറൻ്റിയും പിന്തുണയും

One For All products are designed and manufactured to the highest standards. For information regarding warranty, technical support, or frequently asked questions, please visit the official One For All webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

For the most up-to-date support information, please refer to the manufacturer's official channels:

" />

One For All Samsung TV Replacement Remote Control

മോഡൽ: URC4810

ആമുഖം

The One For All URC4810 is a dedicated replacement remote control designed specifically for Samsung televisions. This remote offers 100% compatibility with all Samsung TV models, providing a seamless and intuitive user experience. It features a quick setup process called SimpleSet and a learning function to transfer commands from your original remote, ensuring you retain all necessary functionalities.

സുരക്ഷാ വിവരങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

One For All URC4810 remote control in its retail packaging.

Image: The One For All URC4810 remote control displayed within its retail packaging, showing the product name and key features.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The URC4810 remote control requires 2x AAA batteries (not included). Follow these steps to install them:

  1. വിദൂര നിയന്ത്രണത്തിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
  2. രണ്ട് AAA ബാറ്ററികൾ ഇടുക, പോസിറ്റീവ് (+) ഉം നെഗറ്റീവ് (-) ടെർമിനലുകളും കമ്പാർട്ടുമെന്റിനുള്ളിലെ അടയാളപ്പെടുത്തലുകളുമായി വിന്യസിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
  3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
വശം view of the One For All URC4810 remote control, showing its slim profile.

ചിത്രം: ഒരു സൈഡ് പ്രോfile view of the One For All URC4810 remote control, illustrating its ergonomic design and the location of the battery compartment seam.

2. SimpleSet Setup

The URC4810 remote features SimpleSet, allowing for quick setup in under 30 seconds. No codes are needed.

  1. Ensure your Samsung TV is turned on.
  2. Point the One For All remote at your Samsung TV.
  3. അമർത്തിപ്പിടിക്കുക ശക്തി button on the One For All remote until your TV turns off. This may take a few seconds.
  4. Once the TV turns off, release the ശക്തി button immediately. The remote is now set up.
  5. Test other functions like Volume Up/Down and Channel Up/Down to confirm full functionality.
ഫ്രണ്ട് view of the One For All URC4810 remote control, showing all buttons.

ചിത്രം: ഒരു നേർരേഖ view of the One For All URC4810 remote control, showcasing its full button layout, including the power button at the top.

3. Learning Feature (Optional)

The learning feature allows you to copy functions from your original Samsung TV remote to the URC4810. This is useful for any specific buttons not covered by the default setup.

  1. Place the One For All remote and your original Samsung remote on a flat surface, facing each other, about 1-2 inches apart.
  2. വൺ ഫോർ ഓൾ റിമോട്ടിൽ, അമർത്തിപ്പിടിക്കുക സജ്ജമാക്കുക button (if available, otherwise refer to the specific manual for learning mode entry, typically a combination of buttons like SHIFT + പഠിക്കുക or similar) until the LED blinks twice and then stays lit.
  3. Press the button on the One For All remote that you wish to program (e.g., a specific app button). The LED will blink rapidly.
  4. On your original Samsung remote, press the corresponding button you want to copy. The LED on the One For All remote will blink twice to confirm successful learning.
  5. Repeat steps 3 and 4 for any other buttons you wish to learn.
  6. ലേണിംഗ് മോഡിൽ നിന്ന് പുറത്തുകടക്കാൻ, സജ്ജമാക്കുക button again (or the button used to enter learning mode). The LED will turn off.
കോണാകൃതിയിലുള്ളത് view of the One For All URC4810 remote control, highlighting its ergonomic design.

ചിത്രം: ഒരു ആംഗിൾ view of the One For All URC4810 remote control, showcasing its comfortable grip and button placement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once set up, the URC4810 remote functions like your original Samsung TV remote. Here are some common button functions:

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the remote.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

If the remote control's range decreases or buttons become unresponsive, it may be time to replace the batteries. Follow the "Battery Installation" steps in the Setup section to replace the old batteries with new AAA alkaline batteries.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
Remote does not work after setup. Incorrect setup or dead batteries. Ensure batteries are correctly inserted and charged. Repeat the SimpleSet process carefully.
ചില ബട്ടണുകൾ പ്രവർത്തിക്കുന്നില്ല. Button not recognized by SimpleSet or not learned. Use the Learning Feature to copy the function from your original remote. Ensure the remote is pointed directly at the TV.
വിദൂര ദൂരം മോശമാണ്. Low batteries or obstruction. Replace batteries. Ensure there are no obstructions between the remote and the TV's IR receiver.
റിമോട്ടിലെ LED പ്രകാശിക്കുന്നില്ല. No batteries or incorrect battery insertion. Check battery orientation and ensure they are new and correctly inserted.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ് എല്ലാവർക്കും വേണ്ടി ഒന്ന്
മോഡൽ നമ്പർ URC4810
അനുയോജ്യമായ ഉപകരണങ്ങൾ Samsung Televisions
പവർ ഉറവിടം ബാറ്ററി പവർ (2x AAA, ഉൾപ്പെടുത്തിയിട്ടില്ല)
നിറം White (Note: Product images show black, but specification states white. Please refer to product packaging for exact color.)
ഇനത്തിൻ്റെ ഭാരം 3.52 ഔൺസ് (ഏകദേശം 100 ഗ്രാം)
ഉൽപ്പന്ന അളവുകൾ (L x W x H) Approx. 4"D x 3"W x 1"H (Note: Dimensions may refer to packaging or a specific part. Actual remote dimensions are typically longer and narrower.)
യു.പി.സി 810209030940

വാറൻ്റിയും പിന്തുണയും

One For All products are designed and manufactured to the highest standards. For information regarding warranty, technical support, or frequently asked questions, please visit the official One For All webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

For the most up-to-date support information, please refer to the manufacturer's official channels:

" />

എല്ലാവർക്കുമായി ഒന്ന് URC4810

One For All Samsung TV Replacement Remote Control

മോഡൽ: URC4810

ആമുഖം

The One For All URC4810 is a dedicated replacement remote control designed specifically for Samsung televisions. This remote offers 100% compatibility with all Samsung TV models, providing a seamless and intuitive user experience. It features a quick setup process called SimpleSet and a learning function to transfer commands from your original remote, ensuring you retain all necessary functionalities.

സുരക്ഷാ വിവരങ്ങൾ

  • ബാറ്ററികൾ കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
  • പഴയതും പുതിയതുമായ ബാറ്ററികളോ വ്യത്യസ്ത തരം ബാറ്ററികളോ മിക്സ് ചെയ്യരുത്.
  • Remove batteries if the remote control is not used for an extended period.
  • Avoid exposing the remote control to direct sunlight, heat sources, or excessive moisture.
  • റിമോട്ട് കൺട്രോൾ ഡിസ്അസംബ്ലിംഗ് ചെയ്യാനോ പരിഷ്ക്കരിക്കാനോ ശ്രമിക്കരുത്.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

  • One For All Samsung TV Replacement Remote Control (URC4810)
One For All URC4810 remote control in its retail packaging.

Image: The One For All URC4810 remote control displayed within its retail packaging, showing the product name and key features.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The URC4810 remote control requires 2x AAA batteries (not included). Follow these steps to install them:

  1. വിദൂര നിയന്ത്രണത്തിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
  2. രണ്ട് AAA ബാറ്ററികൾ ഇടുക, പോസിറ്റീവ് (+) ഉം നെഗറ്റീവ് (-) ടെർമിനലുകളും കമ്പാർട്ടുമെന്റിനുള്ളിലെ അടയാളപ്പെടുത്തലുകളുമായി വിന്യസിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
  3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
വശം view of the One For All URC4810 remote control, showing its slim profile.

ചിത്രം: ഒരു സൈഡ് പ്രോfile view of the One For All URC4810 remote control, illustrating its ergonomic design and the location of the battery compartment seam.

2. SimpleSet Setup

The URC4810 remote features SimpleSet, allowing for quick setup in under 30 seconds. No codes are needed.

  1. Ensure your Samsung TV is turned on.
  2. Point the One For All remote at your Samsung TV.
  3. അമർത്തിപ്പിടിക്കുക ശക്തി button on the One For All remote until your TV turns off. This may take a few seconds.
  4. Once the TV turns off, release the ശക്തി button immediately. The remote is now set up.
  5. Test other functions like Volume Up/Down and Channel Up/Down to confirm full functionality.
ഫ്രണ്ട് view of the One For All URC4810 remote control, showing all buttons.

ചിത്രം: ഒരു നേർരേഖ view of the One For All URC4810 remote control, showcasing its full button layout, including the power button at the top.

3. Learning Feature (Optional)

The learning feature allows you to copy functions from your original Samsung TV remote to the URC4810. This is useful for any specific buttons not covered by the default setup.

  1. Place the One For All remote and your original Samsung remote on a flat surface, facing each other, about 1-2 inches apart.
  2. വൺ ഫോർ ഓൾ റിമോട്ടിൽ, അമർത്തിപ്പിടിക്കുക സജ്ജമാക്കുക button (if available, otherwise refer to the specific manual for learning mode entry, typically a combination of buttons like SHIFT + പഠിക്കുക or similar) until the LED blinks twice and then stays lit.
  3. Press the button on the One For All remote that you wish to program (e.g., a specific app button). The LED will blink rapidly.
  4. On your original Samsung remote, press the corresponding button you want to copy. The LED on the One For All remote will blink twice to confirm successful learning.
  5. Repeat steps 3 and 4 for any other buttons you wish to learn.
  6. ലേണിംഗ് മോഡിൽ നിന്ന് പുറത്തുകടക്കാൻ, സജ്ജമാക്കുക button again (or the button used to enter learning mode). The LED will turn off.
കോണാകൃതിയിലുള്ളത് view of the One For All URC4810 remote control, highlighting its ergonomic design.

ചിത്രം: ഒരു ആംഗിൾ view of the One For All URC4810 remote control, showcasing its comfortable grip and button placement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once set up, the URC4810 remote functions like your original Samsung TV remote. Here are some common button functions:

  • പവർ (ചുവപ്പ് ബട്ടൺ): ടിവി ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുന്നു.
  • നമ്പർ ബട്ടണുകൾ (0-9): നേരിട്ടുള്ള ചാനൽ തിരഞ്ഞെടുക്കൽ.
  • വോളിയം കൂട്ടുക/താഴ്ത്തുക (+/-): ടിവി വോളിയം ക്രമീകരിക്കുന്നു.
  • ചാനൽ മുകളിലേക്കും/താഴേക്കും (CH +/-): ടിവി ചാനലുകൾ മാറ്റുന്നു.
  • നിശബ്ദമാക്കുക: ടിവി ശബ്‌ദം മ്യൂട്ട് ചെയ്യുകയോ അൺമ്യൂട്ട് ചെയ്യുകയോ ചെയ്യുന്നു.
  • മെനു: ടിവിയുടെ പ്രധാന മെനു ആക്‌സസ് ചെയ്യുന്നു.
  • Navigation (Arrow Buttons): മെനുകളിലൂടെയും ഓപ്ഷനുകളിലൂടെയും നാവിഗേറ്റ് ചെയ്യുന്നു.
  • ശരി/നൽകുക: തിരഞ്ഞെടുക്കലുകൾ സ്ഥിരീകരിക്കുന്നു.
  • മടങ്ങുക/മടങ്ങുക: മുമ്പത്തെ സ്ക്രീനിലേക്കോ മെനുവിലേക്കോ തിരികെ പോകുന്നു.
  • പുറത്ത്: നിലവിലുള്ള മെനുവിൽ നിന്നോ ആപ്ലിക്കേഷനിൽ നിന്നോ പുറത്തുകടക്കുന്നു.
  • നിറമുള്ള ബട്ടണുകൾ (ചുവപ്പ്, പച്ച, മഞ്ഞ, നീല): ടിവി മോഡലും ആപ്ലിക്കേഷനും അനുസരിച്ച് പ്രവർത്തനക്ഷമത വ്യത്യാസപ്പെടുന്നു.
  • സ്മാർട്ട് ഹബ്/ഹോം: Accesses the TV's Smart Hub or Home screen.

മെയിൻ്റനൻസ്

വൃത്തിയാക്കൽ

To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the remote.

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

If the remote control's range decreases or buttons become unresponsive, it may be time to replace the batteries. Follow the "Battery Installation" steps in the Setup section to replace the old batteries with new AAA alkaline batteries.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നം സാധ്യമായ കാരണം പരിഹാരം
Remote does not work after setup. Incorrect setup or dead batteries. Ensure batteries are correctly inserted and charged. Repeat the SimpleSet process carefully.
ചില ബട്ടണുകൾ പ്രവർത്തിക്കുന്നില്ല. Button not recognized by SimpleSet or not learned. Use the Learning Feature to copy the function from your original remote. Ensure the remote is pointed directly at the TV.
വിദൂര ദൂരം മോശമാണ്. Low batteries or obstruction. Replace batteries. Ensure there are no obstructions between the remote and the TV's IR receiver.
റിമോട്ടിലെ LED പ്രകാശിക്കുന്നില്ല. No batteries or incorrect battery insertion. Check battery orientation and ensure they are new and correctly inserted.

സ്പെസിഫിക്കേഷനുകൾ

ബ്രാൻഡ് എല്ലാവർക്കും വേണ്ടി ഒന്ന്
മോഡൽ നമ്പർ URC4810
അനുയോജ്യമായ ഉപകരണങ്ങൾ Samsung Televisions
പവർ ഉറവിടം ബാറ്ററി പവർ (2x AAA, ഉൾപ്പെടുത്തിയിട്ടില്ല)
നിറം White (Note: Product images show black, but specification states white. Please refer to product packaging for exact color.)
ഇനത്തിൻ്റെ ഭാരം 3.52 ഔൺസ് (ഏകദേശം 100 ഗ്രാം)
ഉൽപ്പന്ന അളവുകൾ (L x W x H) Approx. 4"D x 3"W x 1"H (Note: Dimensions may refer to packaging or a specific part. Actual remote dimensions are typically longer and narrower.)
യു.പി.സി 810209030940

വാറൻ്റിയും പിന്തുണയും

One For All products are designed and manufactured to the highest standards. For information regarding warranty, technical support, or frequently asked questions, please visit the official One For All webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

For the most up-to-date support information, please refer to the manufacturer's official channels:

  • എല്ലാവർക്കും വേണ്ടി ഒന്ന് Webസൈറ്റ്: www.oneforall.com
  • കസ്റ്റമർ സർവീസ്: റഫർ ചെയ്യുക webപ്രാദേശിക കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.

അനുബന്ധ രേഖകൾ - URC4810

പ്രീview എല്ലാവർക്കും ഒന്ന് URC 1823 വിസിയോ യൂണിവേഴ്സൽ റീപ്ലേസ്‌മെന്റ് റിമോട്ട് യൂസർ ഗൈഡ്
വിസിയോ ടിവികൾക്കായുള്ള വൺ ഫോർ ഓൾ യുആർസി 1823 യൂണിവേഴ്സൽ റീപ്ലേസ്‌മെന്റ് റിമോട്ടിനായുള്ള ഉപയോക്തൃ ഗൈഡ്, സജ്ജീകരണം, ട്രബിൾഷൂട്ടിംഗ്, പഠന പ്രവർത്തനങ്ങൾ എന്നിവയുൾപ്പെടെ.
പ്രീview എല്ലാവർക്കും വേണ്ടിയുള്ള ഒന്ന് URC 1916 ഹിസെൻസ് യൂണിവേഴ്സൽ റീപ്ലേസ്‌മെന്റ് റിമോട്ട് ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
ഹിസെൻസ് ടിവികൾക്കായി നിങ്ങളുടെ വൺ ഫോർ ഓൾ യുആർസി 1916 യൂണിവേഴ്‌സൽ റീപ്ലേസ്‌മെന്റ് റിമോട്ട് എങ്ങനെ സജ്ജീകരിക്കാമെന്നും ഉപയോഗിക്കാമെന്നും അറിയുക. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ, ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ, പഠന പ്രവർത്തനങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview One For All URC 3110 Universal Remote Control Setup and Programming Guide
User manual for the One For All URC 3110 universal replacement remote control. Learn how to install batteries, set up and program your remote for TVs, VCRs, DVD players, cable boxes, and satellite receivers. Includes troubleshooting and a comprehensive list of manufacturer codes.
പ്രീview എല്ലാവർക്കും ഒന്ന് URC 4110 യൂണിവേഴ്സൽ റീപ്ലേസ്‌മെന്റ് റിമോട്ട് കൺട്രോൾ യൂസർ മാനുവൽ
വൺ ഫോർ ഓൾ യുആർസി 4110 യൂണിവേഴ്സൽ റീപ്ലേസ്‌മെന്റ് റിമോട്ട് കൺട്രോളിനായുള്ള ഉപയോക്തൃ മാനുവൽ, വിവിധ ഹോം എന്റർടൈൻമെന്റ് ഉപകരണങ്ങൾക്കായുള്ള സജ്ജീകരണം, സവിശേഷതകൾ, പ്രോഗ്രാമിംഗ്, ട്രബിൾഷൂട്ടിംഗ്, വാറന്റി വിവരങ്ങൾ, നിർമ്മാതാവിന്റെ കോഡുകൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview One For All URC 4812 Universal Replacement Remote for Sony TVs - User Manual
User manual for the One For All URC 4812 universal replacement remote control, designed for Sony TVs. This guide provides detailed instructions on setup, programming, troubleshooting, and controlling audio devices, along with warranty information.
പ്രീview One For All URC 4811 Universal Replacement Remote for LG TVs - Setup and User Guide
Comprehensive guide for the One For All URC 4811 universal replacement remote, designed for LG TVs. Learn how to set up, program, and troubleshoot your remote, including controlling audio devices and learning new functions.