ആമുഖവും അവസാനിച്ചുview
This manual provides detailed instructions for the safe and efficient use of your Rockler 1250 CFM Dust Collector Filter Canister. This filter is designed to enhance the air quality in your workspace by capturing fine dust particles down to 1 micron. Proper installation, operation, and maintenance are crucial for optimal performance and longevity of the unit.
The Rockler 1250 CFM Dust Collector Filter Canister is an upgrade component for the Rockler 1250 CFM Wall Mount Dust Collector (sold separately, #54352).
ഘടകങ്ങൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് താഴെ പട്ടികപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:
- (1) 30" Canister Filter for Rockler Wall-Mount Dust Collector, 1250 CFM
- (1) മൗണ്ടിംഗ് ബ്രാക്കറ്റ്
- (1) 14-gallon Plastic Dust Bag
- സ്ട്രാപ്പ് clamp (pre-installed or separate)
- Rubber gaskets (for a tight seal)

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This canister filter is designed as an upgrade for the Rockler 1250 CFM Wall Mount Dust Collector (#54352). Ensure your dust collector is unplugged and powered off before proceeding with installation.
- Remove Existing Filter: Carefully detach and remove the existing filter bag from your Rockler 1250 CFM Wall Mount Dust Collector. Dispose of any collected dust properly.
- മൗണ്ടിംഗ് ബ്രാക്കറ്റ് ഘടിപ്പിക്കുക: Secure the provided mounting bracket to the dust collector's housing where the filter attaches. Ensure a tight and stable connection.
- Install Canister Filter: Position the new 1-micron canister filter onto the dust collector. Ensure the rubber gaskets are properly seated to create an airtight seal between the filter and the collector housing.
- Secure Canister: Use the strap clamp to firmly secure the canister filter to the dust collector. Verify that the filter is stable and does not wobble.
- പൊടി ബാഗ് ഘടിപ്പിക്കുക: Connect the 14-gallon plastic dust bag to the bottom of the canister filter. Ensure the bag is securely fastened to prevent dust leakage.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the canister filter is properly installed, you can operate your dust collector as usual. The 1-micron filter will significantly improve the filtration efficiency.
- പവർ ഓൺ: Plug in your Rockler 1250 CFM Wall Mount Dust Collector and turn it on.
- ഹോസുകൾ ബന്ധിപ്പിക്കുക: Ensure all dust collection hoses are securely connected to your woodworking machinery.
- പ്രകടനം നിരീക്ഷിക്കുക: Observe the dust collection performance. The improved filtration will result in cleaner air in your workshop.
മെയിൻ്റനൻസ്
Regular maintenance of the canister filter is essential to maintain optimal filtration efficiency and prolong the life of your dust collector.
കാനിസ്റ്റർ ഫിൽട്ടർ വൃത്തിയാക്കുന്നു
The canister filter features a crank-style cleaner to easily dislodge dust from the pleated fabric.
- Turn Off Dust Collector: Always ensure the dust collector is turned off and unplugged before performing any maintenance.
- Rotate Crank Handle: Locate the large crank handle on top of the canister filter. Turn the handle clockwise and counter-clockwise several times. This action rotates an internal agitator that shakes dust off the pleats, allowing it to fall into the collection bag.
- ആവൃത്തി: Clean the filter regularly, especially after significant use or when you notice a decrease in suction power.

ഡസ്റ്റ് ബാഗ് ശൂന്യമാക്കുന്നു
The included 14-gallon plastic dust bag collects the dislodged dust for easy disposal.
- Turn Off Dust Collector: Ensure the dust collector is turned off and unplugged.
- Detach Dust Bag: Carefully unfasten the strap clamp or other securing mechanism holding the plastic dust bag to the bottom of the canister filter.
- Dispose of Dust: Remove the full dust bag and dispose of its contents according to local regulations.
- ബാഗ് വീണ്ടും ഘടിപ്പിക്കുക: Securely attach a new 14-gallon plastic dust bag (or the emptied one, if reusable and clean) to the canister filter, ensuring a tight seal.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your Rockler 1250 CFM Dust Collector Filter Canister.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കുറഞ്ഞ സക്ഷൻ പവർ | Clogged filter pleats, full dust bag, loose hose connections. | Clean the canister filter using the crank handle. Empty the dust bag. Check and tighten all hose connections. |
| Dust Leaking from Canister | Improperly seated gaskets, loose strap clamp, damaged dust bag. | Ensure rubber gaskets are correctly positioned. Tighten the strap clamp. Inspect the plastic dust bag for tears and replace if necessary. |
| Crank Handle is Stiff | Excessive dust buildup on agitator, internal obstruction. | Ensure the dust collector is off. Gently try to free the agitator. If persistent, inspect for obstructions. |
സ്പെസിഫിക്കേഷനുകൾ
- Filtration Rating: 1 മൈക്രോൺ
- ബാഗ് കപ്പാസിറ്റി: 14 gallons (1.87 cubic feet)
- Top Diameter: 15"
- ഇൻലെറ്റ് വ്യാസം: 5"
- Bottom Diameter: 15-1/4"
- Canister Height: 30" (without plastic bag)
- അനുയോജ്യമായ ഉപകരണം: Rockler 1250 CFM Dust Collector
- മെറ്റീരിയൽ: Durable Steel Frame (supports fabric pleats)
- ഇനത്തിൻ്റെ ഭാരം: 23.3 പൗണ്ട്
- പാക്കേജ് അളവുകൾ: 36.4 x 18 x 17 ഇഞ്ച്
- പുനരുപയോഗം: Reusable (filter and bag if cleaned)
- കഷണങ്ങളുടെ എണ്ണം: 1 (canister filter unit)
- UPC: 733175548182
വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the documentation provided with your original Rockler 1250 CFM Wall Mount Dust Collector or visit the official Rockler website. For technical support, replacement parts, or further assistance, please contact Rockler customer service.
Rockler Customer Service:
- Webസൈറ്റ്: www.rockler.com
- ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: റഫർ ചെയ്യുക website for current phone numbers and email support.





