Sharp Original Replacement HEPA Filter FZ-J20HFE User Manual

1. ആമുഖം

This manual provides essential information for the proper installation, maintenance, and understanding of your Sharp Original Replacement HEPA Filter FZ-J20HFE. This filter is designed to maintain the optimal performance of your compatible Sharp Air Purifier by effectively capturing airborne particles.

Using genuine Sharp replacement parts ensures the continued efficiency and longevity of your appliance. Please read these instructions carefully before replacing the filter.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview ഒപ്പം അനുയോജ്യത

The Sharp FZ-J20HFE is a high-efficiency particulate air (HEPA) filter, crucial for trapping microscopic particles such as dust, pollen, pet dander, and mold spores from the air. It is an integral component of your air purification system.

ചിത്രം 2.1: മുൻഭാഗം view of the Sharp FZ-J20HFE HEPA filter, highlighting its pleated structure.

2.1 Compatible Air Purifier Models

This FZ-J20HFE HEPA filter is specifically designed for use with the following Sharp Air Purifier models:

• Sharp DW-J20FA-W
• Sharp FPJ30MB
• Sharp KCF30EW

Ensure your air purifier model is listed above to guarantee proper fit and performance.

3. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

Follow these steps carefully to replace the HEPA filter in your Sharp Air Purifier. Always ensure the appliance is unplugged before performing any maintenance.

1. പവർ ഓഫ്, അൺപ്ലഗ്: Before beginning, turn off your Sharp Air Purifier and unplug it from the power outlet to prevent electric shock.
2. ഫിൽട്ടർ കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക: Refer to your air purifier's specific user manual to locate and open the filter compartment. This is typically on the back or front panel of the unit.
3. പഴയ ഫിൽറ്റർ നീക്കം ചെയ്യുക: Carefully remove the used HEPA filter. It may be dusty, so handle it with care to avoid spreading trapped particles.
4. പുതിയ ഫിൽറ്റർ തയ്യാറാക്കുക: Unpack the new Sharp FZ-J20HFE HEPA filter from its protective packaging.
5. Orient the Filter: Observe the markings on the filter. The filter is designed to be installed in a specific direction. Look for indicators such as "INSIDE" or "OUTSIDE" or arrows indicating airflow direction. Ensure the filter is inserted correctly.

Figure 3.1: Filter orientation markings (e.g., INSIDE/OUTSIDE).
6. പുതിയ ഫിൽറ്റർ ചേർക്കുക: Gently slide the new HEPA filter into the designated slot in the air purifier's filter compartment. Ensure it fits snugly and securely.
7. കമ്പാർട്ട്മെന്റ് അടയ്ക്കുക: ഫിൽട്ടർ കമ്പാർട്ട്മെന്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
8. പവർ പുന ore സ്ഥാപിക്കുക: എയർ പ്യൂരിഫയർ വീണ്ടും പവർ ഔട്ട്‌ലെറ്റിലേക്ക് പ്ലഗ് ചെയ്ത് ഓണാക്കുക.
9. Reset Filter Indicator (if applicable): Some models have a filter replacement indicator light. Consult your air purifier's manual for instructions on how to reset this indicator after replacing the filter. This often involves pressing and holding a specific button for a few seconds.

4. Maintenance and Replacement Schedule

The HEPA filter is not washable and cannot be cleaned for reuse. Attempting to wash the filter will damage its delicate structure and compromise its filtration capabilities.

Figure 4.1: Important warning: DO NOT WASH the HEPA filter.

4.1 Filter Lifespan

The lifespan of the FZ-J20HFE HEPA filter varies depending on usage frequency, air quality, and environmental conditions. As a general guideline, it is recommended to replace the HEPA filter approximately every 1 to 2 years. Your air purifier's filter indicator light (if equipped) will also signal when a replacement is due.

4.2 നിർമാർജനം

Dispose of the old filter according to your local waste disposal regulations. Since the filter traps airborne particles, it is advisable to place the used filter in a sealed plastic bag before discarding it to prevent the release of trapped pollutants.

5 സ്പെസിഫിക്കേഷനുകൾ

Key specifications for the Sharp Original Replacement HEPA Filter FZ-J20HFE:

Figure 5.1: Packaging of the Sharp FZ-J20HFE HEPA filter.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues after replacing your HEPA filter, consider the following common scenarios:

• ഫിൽട്ടർ ഇൻഡിക്കേറ്റർ ലൈറ്റ് ഓണായി തുടരുന്നു:

  After replacing the filter, you may need to manually reset the filter indicator light on your air purifier. Refer to your air purifier's specific user manual for instructions on how to perform a filter reset. This usually involves pressing and holding a designated button for several seconds.
• Reduced Airflow or Poor Air Quality:

  Ensure the new filter is installed correctly and securely. Check that the filter compartment cover is fully closed. Verify that the filter is oriented correctly (e.g., "INSIDE" facing the correct direction as per your air purifier's manual). If the issue persists, ensure no other filters (like a pre-filter or deodorizing filter) also need replacement or cleaning.

• അസാധാരണമായ ശബ്ദങ്ങൾ:

  Check that the filter is seated properly and not obstructing any moving parts or fans within the air purifier. A loose or improperly installed filter can cause vibrations or rattling noises.

If problems persist after following these steps, please contact Sharp customer support.

7. വാറൻ്റിയും പിന്തുണയും

This Sharp Original Replacement HEPA Filter FZ-J20HFE is manufactured to high-quality standards. For information regarding the warranty of your air purifier or the replacement filter, please refer to the documentation provided with your air purifier or visit the official Sharp webസൈറ്റ്.

7.1 എക്സ്റ്റൻഡഡ് വാറന്റി ഓപ്ഷനുകൾ

Extended warranty plans may be available for your Sharp Air Purifier, which can cover parts and service beyond the standard manufacturer's warranty. Options observed include:

• 1 വർഷത്തെ വിപുലീകൃത വാറന്റി
• 2 വർഷത്തെ വിപുലീകൃത വാറന്റി

Please check with your retailer or Sharp's official channels for details on purchasing extended warranty plans.

7.2 ഉപഭോക്തൃ പിന്തുണ

For further assistance, technical support, or to purchase additional genuine Sharp replacement parts, please visit the official Sharp Store or contact their customer service:

Visit the Official SHARP Store on Amazon.in