ഓകിൻ മോഡൽ JLDQ-11 & JLDQ.11.156.333 പവർ റെക്ലൈനർ മോട്ടോർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please ensure proper electrical safety when handling and installing the motor. Always disconnect power before servicing. Do not use outdoors or in wet environments. Consult a professional if you are unsure about installation or troubleshooting.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Okin Refined-R Model: JLDQ.11.156.333 is an original Okin JLDQ motor designed for power recliners and electric lift chairs. This actuator motor set includes one motor and two connectors, facilitating both switch hand control and power supply connections.

അനുയോജ്യത

Different actuator/motors are not compatible with every frame. The frame has strict demands for the actuator/motor's minimum install dimension, stroke, and plugs. This motor is suggested to replace OKIN model JLDQ.11.156.333, and can also replace JLDQ.11.156.333A/D/K/P/Z series. While there might be minor differences, these do not affect use. Always check your motor brand and model first to ensure proper fit and function.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. തയ്യാറാക്കൽ: Ensure the recliner chair is unplugged from the power source. Carefully flip the chair over to access the underside mechanism.
2. പഴയ മോട്ടോർ തിരിച്ചറിയുക: Locate the existing actuator motor. Note how it is mounted and connected.
3. വയറിംഗ് വിച്ഛേദിക്കുക: Disconnect the 5-pin round plug for the hand control and the 2-pin square plug for the power supply from the old motor.
4. പഴയ മോട്ടോർ നീക്കം ചെയ്യുക: Unscrew or unbolt the old motor from the chair frame. Keep all hardware for reuse.
5. പുതിയ മോട്ടോർ സ്ഥാപിക്കുക: Position the new Okin JLDQ.11.156.333 motor in the same location as the old one. Secure it to the chair frame using the original bolts or appropriate hardware.
6. വയറിംഗ് ബന്ധിപ്പിക്കുക: Connect the 5-pin round plug for the hand control and the 2-pin square plug for the power supply to the new motor. Ensure connections are secure.
7. ടെസ്റ്റ് പ്രവർത്തനം: Carefully return the chair to its upright position. Plug the chair back into a power source and test the reclining function using the hand control.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Okin JLDQ.11.156.333 motor operates in conjunction with your recliner's existing hand control. Simply press the appropriate buttons on your hand control to extend or retract the footrest and recline the chair. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating and ensure longevity.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Wipe clean with a dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• പതിവ് പരിശോധന: Periodically inspect the motor and its connections for any signs of wear, damage, or loose wiring.
• ദ്രാവകങ്ങൾ ഒഴിവാക്കുക: Keep the motor and electrical components away from liquids to prevent damage and electrical hazards.

ട്രബിൾഷൂട്ടിംഗ്

• മോട്ടോർ ചലിക്കുന്നില്ല: First, troubleshoot the switch and power supply. Ensure all plugs are securely connected and the power source is active.
• Partial Movement: Check for any obstructions in the recliner mechanism. Verify that the motor is correctly installed and not binding.
• അസാധാരണമായ ശബ്ദങ്ങൾ: Inspect the motor and its mounting for any loose parts or signs of friction. Ensure the motor is properly lubricated if applicable (consult manufacturer for specific lubrication guidelines).

സാങ്കേതിക സവിശേഷതകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Ensure you have your model number (JLDQ.11.156.333) and any purchase details available when seeking support.