Jubilee 3-Tier Utility Service Cart (37.5" x 31.5") Instruction Manual

1. ആമുഖം

Thank you for choosing the Jubilee 3-Tier Utility Service Cart. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new utility cart. Please read these instructions thoroughly before assembly and retain them for future reference.

Image 1.1: Fully assembled Jubilee 3-Tier Utility Service Cart.

2 സുരക്ഷാ വിവരങ്ങൾ

Observe the following safety precautions to prevent injury or damage to the cart:

• പരമാവധി ഭാര ശേഷി 250 പൗണ്ട് (113 കിലോഗ്രാം) കവിയരുത്.
• ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും സുരക്ഷിതമായി കൂട്ടിച്ചേർക്കപ്പെട്ടിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• ഷെൽഫുകളിലുടനീളം ഭാരം തുല്യമായി വിതരണം ചെയ്യുക.
• Engage locking casters when the cart needs to remain stationary.
• Avoid pushing the cart over uneven surfaces or obstacles that could cause it to tip.
• Keep hands and feet clear of moving parts, especially during assembly and when moving the cart.

3. പാക്കേജ് ഉള്ളടക്കം

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, contact Jubilee customer support.

• 3 x Shelf Panels (Black plastic)
• 4 x Upright Posts (Brushed aluminum)
• 2 x Handles (Black plastic)
• 2 x Swivel Casters (Non-marking, 4-inch)
• 2 x Locking Swivel Casters (Non-marking, 4-inch)

4. അസംബ്ലി നിർദ്ദേശങ്ങൾ

ആവശ്യമായ ഉപകരണങ്ങൾ: Rubber Mallet (not included)

കണക്കാക്കിയ അസംബ്ലി സമയം: 15-30 മിനിറ്റ്

1. താഴെയുള്ള ഷെൽഫിൽ കാസ്റ്ററുകൾ ഘടിപ്പിക്കുക: Turn one shelf panel upside down. Insert the stems of the two regular swivel casters into two corner holes on one short side of the shelf. Insert the stems of the two locking swivel casters into the remaining two corner holes on the opposite short side. Use a rubber mallet to firmly tap the casters into place until they are fully seated. Ensure the locking casters are on the same side for proper functionality.
2. Install Upright Posts: Insert the four aluminum upright posts into the corner sockets of the bottom shelf. Ensure the posts are oriented correctly, with the wider end facing upwards. Use a rubber mallet to tap them firmly into place.
3. Add Middle Shelf: Slide the second shelf panel down over the four upright posts. Align the corner sockets of the shelf with the posts. Ensure the shelf's lip orientation is consistent with the bottom shelf (e.g., all lips facing inwards or outwards). Use the rubber mallet to tap the shelf down until it is securely seated and level.
4. Add Top Shelf: Repeat the process from step 3 for the third shelf panel.
5. ഹാൻഡിലുകൾ അറ്റാച്ചുചെയ്യുക: Place the two handles onto the top ends of the upright posts. The handles are designed to fit snugly. Use the rubber mallet to tap them down firmly until they are fully seated and secure.

Image 4.1: Detail of shelf lip (1-inch front/side, 1/4-inch back) and 4-inch casters (swivel and locking).

Important Note: Some force may be required to fully seat the posts and shelves. A rubber mallet is essential for proper assembly. Ensure all parts are fully engaged to prevent instability.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 കാർട്ട് നീക്കൽ

To move the cart, grasp the ergonomic handles located at each end. Push or pull the cart to your desired location. The 4-inch non-marking swivel casters allow for smooth maneuverability.

Image 5.1: Ergonomic handle for comfortable grip and control.

5.2 Locking the Wheels

To prevent the cart from moving, engage the brakes on the two locking casters. Press down on the lever located on each locking caster until it clicks into place. To release the brake, lift the lever upwards.

5.3 കാർട്ട് ലോഡ് ചെയ്യുന്നു

Place items on the shelves, distributing weight as evenly as possible. The cart is designed for various uses, including transporting janitorial supplies, tools, housekeeping items, and office supplies.

Image 5.2: The utility cart is suitable for diverse environments such as libraries, restaurants, and warehouses.

6. പരിപാലനം

6.1 വൃത്തിയാക്കൽ

The smooth glossy finish plastic shelves are easy to clean. Wipe down the cart with a damp cloth and mild detergent as needed. Avoid abrasive cleaners that could damage the surface.

6.2 പരിശോധന

Periodically inspect the cart for any signs of wear or damage. Check that all casters are functioning correctly and that the shelves and posts remain securely connected. Tighten or replace components as necessary.

7. പ്രശ്‌നപരിഹാരം

• അസംബ്ലിക്ക് ശേഷം വണ്ടി ഇളകുന്നു: Ensure all upright posts and shelves are fully seated and tapped down with a rubber mallet. Disassemble and reassemble any loose sections, applying more force if necessary.
• കാസ്റ്ററുകൾ സുഗമമായി ഉരുളുന്നില്ല: Check for debris (hair, lint) wrapped around the caster wheels. Clean as needed. Ensure the caster stems are fully inserted into the bottom shelf.
• Brakes not holding: Verify that the locking casters are fully engaged. If the issue persists, inspect the brake mechanism for damage.

8 സ്പെസിഫിക്കേഷനുകൾ

Image 8.1: Detailed dimensions of the utility cart.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the product packaging or contact Jubilee customer service through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.