ആമുഖം
Welcome to the MEEPO Voyager X Electric Longboard Skateboard user manual. This guide provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new electric longboard. Please read this manual thoroughly before your first ride to ensure a safe and enjoyable experience.
സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ
Riding an electric skateboard carries inherent risks. Always prioritize safety. Failure to follow these guidelines may result in serious injury or death.
- Always wear a helmet and appropriate protective gear (knee pads, elbow pads, wrist guards).
- Do not ride in traffic, on wet surfaces, or in low visibility conditions.
- Understand local laws and regulations regarding electric skateboards.
- Perform a pre-ride inspection: check brakes, wheels, trucks, and battery level.
- Start with the lowest speed mode and gradually increase as you gain experience.
- കാൽനടയാത്രക്കാരിൽ നിന്നും മറ്റ് വാഹനങ്ങളിൽ നിന്നും സുരക്ഷിതമായ അകലം പാലിക്കുക.
- Do not attempt stunts or extreme maneuvers beyond your skill level.
- Keep fingers, hair, and clothing away from moving parts.
- Do not modify the skateboard in any way.
ഉൽപ്പന്ന ഘടകങ്ങൾ
The MEEPO Voyager X is designed for performance and comfort. Key components include:
- ഡെക്ക്: Made from durable Maple Wood, providing a stable platform.
- ചക്രങ്ങൾ: Equipped with 110mm Rubber Cyclone Cruising Wheels for superior shock absorption and versatility on various terrains (sand, gravel, mud, grass, concrete).
- മോട്ടോറുകൾ: Dual 6358 BLDC motors for powerful propulsion.
- ബാറ്ററി: 12S3P Molicel P42A, 544 Wh capacity.
- ഇഎസ്സി: LYFOC 55B ESC for smart and precise control of acceleration and brakes.
- ട്രക്കുകൾ: Designed for smooth carving and stability.

ചിത്രം: കഴിഞ്ഞുview of the MEEPO Voyager X Electric Longboard, showing the top deck with grip tape, the side profile revealing the battery enclosure and motors, and the bottom view displaying the motor covers and truck assembly. This image highlights the overall design and key components of the skateboard.

Image: Close-up of the MEEPO Cyclone 110mm Rubber Wheels, showcasing their unique tread pattern and core design. Also visible are the drive pulleys and belts, which are essential for transmitting power from the motors to the wheels. These wheels are designed for superior comfort and grip on diverse terrains.
സജ്ജീകരണവും ആദ്യ ഉപയോഗവും
അൺബോക്സിംഗും പരിശോധനയും
- പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
- Inspect the skateboard for any visible damage from shipping. Contact customer support immediately if damage is found.
- Ensure all accessories are present: remote control, charger, tools, and user manual.
ബാറ്ററി ചാർജ് ചെയ്യുന്നു
Before first use, fully charge the skateboard's battery.
- Connect the charger to the charging port on the skateboard.
- ഒരു സാധാരണ മതിൽ ഔട്ട്ലെറ്റിലേക്ക് ചാർജർ പ്ലഗ് ചെയ്യുക.
- The charging indicator light on the charger will change (e.g., red to green) when fully charged.
- ചാർജിംഗ് സമയം ഏകദേശം 2.7 മണിക്കൂറാണ്.
- ബാറ്ററി അമിതമായി ചാർജ് ചെയ്യരുത്. പൂർണ്ണമായും ചാർജ് ചെയ്തുകഴിഞ്ഞാൽ വിച്ഛേദിക്കുക.
റിമോട്ട് കൺട്രോൾ ജോടിയാക്കൽ
Your remote control should be pre-paired. If not, follow these steps:
- Turn on the skateboard.
- വിദൂര നിയന്ത്രണം ഓണാക്കുക.
- Press and hold the pairing button on the skateboard (refer to specific model diagram if available) until the indicator light flashes.
- Press and hold the pairing button on the remote control until it vibrates or indicates successful pairing.
- Test throttle and brake response before riding.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
റൈഡിംഗ് മോഡുകൾ
The MEEPO Voyager X features 4 riding modes, from Beginner to Pro, allowing riders to choose a speed and acceleration profile suitable for their skill level.
- തുടക്കക്കാരന്റെ മോഡ്: Gentle acceleration and limited top speed, ideal for new riders.
- ഇക്കോ മോഡ്: Balanced performance for extended range.
- സ്പോർട്സ് മോഡ്: Increased acceleration and higher top speed for experienced riders.
- പ്രോ മോഡ്: Maximum power and speed, for advanced riders only.
Refer to your remote control's manual for instructions on how to switch between modes.
ആരംഭിക്കുന്നതും നിർത്തുന്നതും
- To start, gently push off with one foot as you would on a traditional skateboard, then slowly engage the throttle on the remote.
- To slow down or stop, gently pull back on the brake lever/trigger on the remote. Avoid sudden braking, especially at high speeds.
Carving and Turning
The Voyager X is designed for smooth carving. Lean into turns and use subtle foot pressure to steer. Practice in an open, safe area.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and safe operation of your MEEPO Voyager X.
- വൃത്തിയാക്കൽ: Wipe down the deck and components with a damp തുണി. അമിതമായ വെള്ളമോ കഠിനമായ രാസവസ്തുക്കളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- വീൽ പരിശോധന: Regularly check wheels for wear, cracks, or embedded debris. The 110mm Rubber Cyclone wheels are durable but should be inspected.
- വഹിക്കുന്ന പരിപാലനം: Clean and lubricate bearings periodically to ensure smooth wheel rotation.
- Truck Tightness: Check and adjust truck tightness to your preference for stability and turning.
- Belt Inspection (if applicable): If your model uses belts, check them for wear, tension, and damage.
- ബാറ്ററി കെയർ: Store the skateboard with a partial charge (around 50-60%) if not used for extended periods. Avoid fully discharging the battery.
- സംഭരണം: നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും അങ്ങേയറ്റത്തെ താപനിലയിൽ നിന്നും അകലെ തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Skateboard not turning on | ബാറ്ററി ചാർജ് കുറവാണ്; പവർ ബട്ടൺ ശരിയായി അമർത്തിയിട്ടില്ല. | Charge the battery; Press and hold the power button firmly. |
| റിമോട്ട് കണക്റ്റ് ചെയ്യുന്നില്ല | Remote battery low; Not paired; Interference | Charge remote; Re-pair remote (see Setup section); Move away from strong signal interference. |
| ഓട്ടത്തിനിടയിൽ വൈദ്യുതി നഷ്ടപ്പെടുന്നു | Battery depleted; Overheating | Charge battery; Allow motors/ESC to cool down before resuming. |
| Unusual noises from wheels/motors | Debris in wheels/bearings; Loose components; Worn belts (if applicable) | Inspect and clean wheels/bearings; Tighten all visible screws; Replace worn belts. |
If you encounter issues not listed here, or if solutions do not resolve the problem, please contact MEEPO customer support.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | Meepo |
| മോഡൽ | MEEPO Voyager X with 110mm Rubber Cyclone wheels |
| ഡെക്ക് ദൈർഘ്യം | 980 മില്ലിമീറ്റർ |
| ഡെക്ക് വീതി | 298 മില്ലിമീറ്റർ |
| ഇനത്തിൻ്റെ ഭാരം | 10.8 കിലോഗ്രാം |
| മെറ്റീരിയൽ | Maple Wood (Deck), Rubber (Wheels) |
| ചക്രത്തിൻ്റെ വലിപ്പം | 110 Millimeters (Cyclone Wheels) |
| ചാർജിംഗ് സമയം | 2.7 മണിക്കൂർ |
| നൈപുണ്യ നില | Beginner to Advanced (with 4 riding modes) |
| ബാറ്ററി | 12S3P Molicel P42A, 544 Wh |
| മോട്ടോറുകൾ | Dual 6358 BLDC motors |
| ഇഎസ്സി | LYFOC 55B ESC |
വാറൻ്റിയും പിന്തുണയും
MEEPO offers a limited warranty on its products. Please refer to the official MEEPO website or the warranty card included with your purchase for detailed terms and conditions.
For technical support, spare parts, or warranty claims, please contact MEEPO customer service through their official webസൈറ്റ്: www.meepoboard.com/contact-us.
You can also visit the official Meepo Store on Amazon for more information: Meepo Amazon Store.





