Veise VS01 കീലെസ്സ് എൻട്രി ഇലക്ട്രോണിക് കീപാഡ് ഡെഡ്ബോൾട്ട് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your Veise VS01 Keyless Entry Electronic Keypad Deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

The Veise VS01 offers enhanced security and convenience with features such as multiple user codes, auto-locking, and an anti-peeking password function. It is designed for easy installation on most standard doors.

2. ബോക്സിൽ എന്താണുള്ളത്?

Carefully unpack your Veise VS01 Keyless Entry Electronic Keypad Deadbolt and verify that all components are present:

• 1x Keypad Deadbolt (Exterior Assembly)
• 1x Interior Assembly
• 1x Latch
• 1x Strike Plate
• 1x മൗണ്ടിംഗ് പ്ലേറ്റ്
• സ്ക്രൂകൾ (ഇൻസ്റ്റാളേഷനായി വ്യത്യസ്ത വലുപ്പങ്ങൾ)
• ഇൻസ്റ്റലേഷൻ നിർദ്ദേശ മാനുവൽ
• പ്രോഗ്രാമിംഗ് നിർദ്ദേശങ്ങൾ
• റീസെറ്റ് ടൂൾ

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation of your Veise VS01 Keyless Entry Electronic Keypad Deadbolt. A screwdriver is the only tool required for most installations.

3.1 Measure Door Dimensions

ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുമുമ്പ്, നിങ്ങളുടെ വാതിൽ ഇനിപ്പറയുന്ന സ്പെസിഫിക്കേഷനുകൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക:

• വാതിലിന്റെ കനം: 1-3/8" മുതൽ 2" വരെ (35mm മുതൽ 50mm വരെ)
• Cross bore diameter: 2-1/8" (54mm)
• Backset: Adjustable for 2-3/8" (60mm) or 2-3/4" (70mm)
• Edge bore diameter: 1" (25mm)

Ensure the hole in the door frame for the strike plate is drilled a minimum of 1" (25mm) deep.

Image: Door dimensions and lock compatibility for standard doors.

3.2 ലാച്ചും സ്ട്രൈക്ക് പ്ലേറ്റും ഇൻസ്റ്റാൾ ചെയ്യുക

Install the latch into the edge bore of the door. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure the latch with the provided screws. Install the strike plate on the door frame, aligning it with the latch mechanism, and secure it with screws.

3.3 Mount the Exterior and Interior Assemblies

With the latch fully retracted (in the unlocked position), insert the exterior keypad assembly. Route the cable from the exterior assembly below the latch. Install the mounting plate on the interior side of the door, securing it with screws. Connect the cable connector from the exterior assembly to the socket on the interior assembly, ensuring it is fully attached. Align the axle from the exterior assembly with the hole in the latch. Attach the interior assembly to the mounting plate and tighten the remaining screws.

3.4 Battery Installation and Initial Reset

The lock requires 4 AA batteries (not included). Load 3 AA batteries into the battery compartment. Press and hold the Reset button on the interior assembly using the reset tool. While holding the Reset button, load the 4th battery and continue holding the Reset button for 3 seconds. Release the button and cover the battery compartment. This completes the initial reset and calibration.

Image: Interior assembly with battery compartment and reset button.

3.5 ഇൻസ്റ്റലേഷൻ വീഡിയോ ഗൈഡ്

For a visual guide on the installation process, please refer to the official Veise VS01 Keypad Deadbolt Installation Video:

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Your Veise VS01 Keyless Entry Electronic Keypad Deadbolt offers various convenient and secure operating modes.

4.1 Keyless Entry and User Codes

The lock supports up to 20 individual user codes for family and trusted friends, plus an available one-time code for temporary visitors. This eliminates the need for physical keys.

Image: Keypad illustrating the 21 access code capacity.

4.2 Auto-Lock and One-Touch Lock

• യാന്ത്രിക ലോക്ക്: This feature automatically locks the door after a set period (10-99 seconds) once it's closed. This provides peace of mind, especially when leaving in a hurry.
• വൺ-ടച്ച് ലോക്ക്: To manually lock the door from the outside, simply press and hold any key on the keypad for 2 seconds.

Image: Auto-lock and one-touch locking features.

4.3 Anti-Peeking Password

Enhance your security by entering random digits before or after your actual code. This prevents others from guessing your code by observing your finger movements on the keypad.

Image: Anti-peeking password in use.

4.4 സൈലൻ്റ് മോഡ്

Enable silent mode to disable keypad beeps, which is useful for quiet entry or exit, especially during late hours or when children are sleeping.

Image: Silent mode feature.

4.5 അവധിക്കാല മോഡ്

Activate vacation mode for extended periods away from home. This feature disables all user codes temporarily, providing an extra layer of security when your property is vacant.

Image: Vacation mode feature.

4.6 Programming Video Guide

For detailed instructions on programming user codes, master codes, and other settings, please watch the official Veise VS01 Programming Video:

5. പരിപാലനം

5.1 ബാറ്ററി ലൈഫും മാറ്റിസ്ഥാപിക്കലും

The electronic keypad door lock operates on 4 AA batteries (not included) and can last for approximately 1 year under normal use. The lock features a low battery alert function to notify you when batteries need replacement. It is recommended to use alkaline AA batteries; rechargeable batteries are not recommended.

Image: Low battery alert and emergency power port.

5.2 Emergency Power Port

In case of complete battery depletion, you can temporarily power the lock using an external power bank connected to the emergency power port. This allows you to enter your code and replace the batteries.

5.3 വൃത്തിയാക്കൽ

Clean the keypad and lock exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or electronic components.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Veise VS01 lock, refer to the following common problems and solutions:

• ലോക്ക് പ്രതികരിക്കുന്നില്ല: Check battery levels. If batteries are low or dead, replace them or use the emergency power port. Ensure the cable connection between the exterior and interior assemblies is secure.
• പ്രോഗ്രാമിംഗ് ബുദ്ധിമുട്ടുകൾ: Refer to the programming video or the dedicated programming instructions. Ensure you are following the steps precisely, especially regarding the master code and user code entry sequences. A common issue is incorrect entry of the master code or not pressing '#' after each step.
• Auto-lock engaging prematurely or not at all: Verify the auto-lock duration setting. Ensure the door closes completely and the latch can fully extend into the strike plate without obstruction.
• കീപാഡ് പ്രകാശിക്കുന്നില്ല: Check battery levels. If the batteries are new and correctly installed, contact customer support.
• തെറ്റായ കോഡ് എൻട്രി പരിധി: After 10 invalid code entries, the lock will temporarily disable for 3 minutes to prevent unauthorized access. Wait for the lockout period to expire before attempting to enter the code again.

Image: Wrong code entry limit feature.

7 സ്പെസിഫിക്കേഷനുകൾ

Image: Environmental resistance features.

8. വാറൻ്റിയും പിന്തുണയും

Veise offers a minimum of 1 year product warranty from the date of purchase. For any questions, technical assistance, or warranty claims, please contact Veise customer support. 24/7 email support is available to assist you.

കൂടുതൽ സഹായത്തിന്, ദയവായി സന്ദർശിക്കുക Veise Store on Amazon.