MOUNTUP MU2005 Gas Spring Single Monitor Wall Mount

1. ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of your MOUNTUP MU2005 Gas Spring Single Monitor Wall Mount. This mount is designed to securely hold computer screens and televisions, offering adjustable positioning for an ergonomic viewing experience. Please read these instructions carefully before installation to ensure safe and correct usage.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Improper installation may result in serious personal injury and property damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install on drywall alone. This mount is designed for installation on wood studs, solid concrete walls, or brick walls.
• മൗണ്ടിംഗ് ഉപരിതലത്തിന് മൗണ്ടിന്റെയും ഡിസ്പ്ലേയുടെയും സംയുക്ത ഭാരം സുരക്ഷിതമായി താങ്ങാൻ കഴിയുമെന്ന് ഉറപ്പാക്കുക.
• പരമാവധി ഭാര ശേഷി 26.5 പൗണ്ട് (12 കിലോഗ്രാം) കവിയരുത്.
• Use only the provided hardware. If any parts are missing or defective, contact MOUNTUP customer service.
• ഇൻസ്റ്റാളേഷൻ സമയത്ത് കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും അകറ്റി നിർത്തുക.
• മൌണ്ട് സുരക്ഷിതമാണെന്നും എല്ലാ ഫാസ്റ്റനറുകളും ഇറുകിയതാണെന്നും ഇടയ്ക്കിടെ പരിശോധിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.

• Monitor Wall Mount Arm (MU2005)
• വെസ പ്ലേറ്റ്
• VESA Extension Kit (for larger VESA patterns)
• Mounting Hardware (screws, anchors, washers)
• Hex Keys for Adjustment
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Image: Main components of the MOUNTUP MU2005 monitor wall mount, including the gas spring arm, VESA mounting plate, and VESA extension brackets.

4 സ്പെസിഫിക്കേഷനുകൾ

Image: Detailed diagram illustrating the mount's dimensions, VESA compatibility (75x75, 100x100, 100x200, 200x100, 200x200), weight capacity (4.4-26.5 lbs), and supported screen sizes (22-35 inches).

5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before beginning, ensure you have all necessary tools and that your wall type is compatible. This mount is suitable for wood studs, concrete walls, and brick walls. It is NOT for drywall alone.

5.1 അനുയോജ്യതാ പരിശോധന

Confirm your monitor meets the following criteria:

1. മോണിറ്റർ വലുപ്പം: 22-35 ഇഞ്ച്
2. ഭാരം നിരീക്ഷിക്കുക: 4.4-26.5 പൗണ്ട്
3. VESA പാറ്റേൺ: 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm
4. ചുമർ തരം: Wood Stud, Brick Wall, or Concrete Wall

Image: A visual guide to checking monitor compatibility with the mount, covering screen size, weight, VESA pattern, and suitable wall types.

5.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. Install the Arm to the Wall: Securely attach the wall plate of the monitor arm to a wood stud, concrete wall, or brick wall using the appropriate hardware. Ensure it is level and firmly anchored.


Image: Illustration of mounting the arm's wall plate to the wall.

2. Attach VESA Plate to Monitor Back: Fasten the VESA plate to the back of your monitor using the screws that fit your monitor's VESA holes. Use the VESA extension kit if your monitor requires a larger VESA pattern.


Image: Illustration of attaching the VESA plate to the monitor's rear.

3. Attach Monitor onto the Arm: Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place securely.


Image: Illustration of sliding the monitor onto the arm's VESA head.

4. Adjust Gas Spring to Proper Tension: This is crucial for the arm to hold your monitor at the desired height. Refer to the 'Operating' section for detailed adjustment instructions.


Image: Illustration of adjusting the gas spring tension on the arm.

5.3 കേബിൾ മാനേജ്മെന്റ്

Route your cables through the integrated cable management channels on the arm to maintain a clean and organized workspace.

Image: The monitor arm demonstrating its full range of motion, including 360° rotation, 90°/-90° swivel, 90°/-45° tilt, and 11 inches of adjustable height.

6. Operating the Monitor Arm

The MOUNTUP MU2005 offers extensive adjustability to achieve optimal viewആംഗിളുകളും എർഗണോമിക് പൊസിഷനിംഗും.

6.1 Gas Spring Adjustment (Monitor Height)

The gas spring allows for effortless height adjustment. If your monitor does not stay at the desired height, adjust the tension:

• Monitor raises up (too light): Turn the screw clockwise ("-" direction) to reduce tension.
• Monitor drops down (too heavy): Turn the screw counter-clockwise ("+" direction) to increase tension.

കുറിപ്പ്: Hold the arm in a horizontal position during adjustment. Refer to the table below for approximate turns based on monitor weight.

Image: Comprehensive guide for adjusting gas spring tension and tilt angle, including a table correlating monitor weight with the number of turns for adjustment.

6.2 Tilt Angle Adjustment

If your monitor faces down or up unintentionally, adjust the tilt tension:

1. Loosen the tilting bolt (Turn to "-" direction).
2. നിങ്ങൾക്ക് ആവശ്യമുള്ള ആംഗിളിലേക്ക് മോണിറ്റർ ക്രമീകരിക്കുക.
3. Retighten the tilting bolt (Turn to "+" direction).

Image: Visual instructions for adjusting the gas spring tension and the monitor's tilt angle using a hex key.

6.3 Swivel and Rotation

• The arm can swivel 180° at the wall plate and 360° at the arm joint.
• The VESA plate allows for 180° swivel and 360° rotation, enabling easy switching between portrait and landscape orientations.

Image: The monitor arm demonstrating its full range of motion, including 360° rotation, 90°/-90° swivel, 90°/-45° tilt, and 11 inches of adjustable height.

7. പരിപാലനം

Regular maintenance ensures the longevity and safe operation of your monitor mount.

• വൃത്തിയാക്കൽ: മൗണ്ട് ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് തുടയ്ക്കുക.amp തുണി. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഒഴിവാക്കുക.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• Gas Spring Function: If the gas spring's performance changes over time, re-adjust the tension as described in the 'Operating' section.

8. പ്രശ്‌നപരിഹാരം

If you encounter issues with your MOUNTUP monitor arm, refer to the following common problems and solutions:

8.1 Arm Does Not Stay at Desired Height

• പ്രശ്നം: Monitor arm falls down.
• പരിഹാരം: The gas spring tension is too low for the monitor's weight. Increase tension by turning the adjustment screw counter-clockwise ("+" direction).
• പ്രശ്നം: Monitor arm rises up.
• പരിഹാരം: The gas spring tension is too high for the monitor's weight. Decrease tension by turning the adjustment screw clockwise ("-" direction).

Refer to the 'Gas Spring Adjustment' section for detailed instructions and the weight-to-turns table.

8.2 Monitor Tilts Down Unintentionally

• പ്രശ്നം: The monitor head cannot maintain its tilt angle.
• പരിഹാരം: The tilting bolt is loose. Loosen the tilting bolt, adjust the monitor to the desired angle, and then retighten the tilting bolt firmly.

9. വാറൻ്റിയും പിന്തുണയും

MOUNTUP provides a 3-year support for this product. If you have any questions regarding pre-purchase compatibility, installation, or require assistance with any issues, please do not hesitate to contact MOUNTUP customer service. Our team is available to provide friendly and helpful support.