HOBBYWING EZRUN 1626SD-3500KV

HOBBYWING EZRUN 1626SD-3500KV Motor Instruction Manual

Model: EZRUN 1626SD-3500KV (Part Numbers: 30402653, 30402654, 30402655)

1. ആമുഖം

This manual provides essential information for the proper installation, operation, and maintenance of your HOBBYWING EZRUN 1626SD-3500KV motor. Please read this manual thoroughly before use to ensure safe and efficient operation.

സുരക്ഷാ മുൻകരുതലുകൾ

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The HOBBYWING EZRUN 1626SD-3500KV motor is designed for high performance in RC applications, offering improved top speed, precise response, and high efficiency with cool operation. Its modular design facilitates easy cleaning and maintenance.

HOBBYWING EZRUN 1626SD-3500KV Motor

Image showing the HOBBYWING EZRUN 1626SD-3500KV motor, highlighting its compact design and connection points.

പ്രധാന സവിശേഷതകൾ:

ബോക്സിൽ എന്താണുള്ളത്:

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

മോട്ടോറിന്റെ പ്രകടനത്തിനും ദീർഘായുസ്സിനും ശരിയായ ഇൻസ്റ്റാളേഷൻ നിർണായകമാണ്.

മോട്ടോർ ഘടിപ്പിക്കൽ:

Securely mount the EZRUN 1626SD motor into your RC vehicle's motor mount. Ensure that the motor is firmly attached to prevent movement during operation, which could lead to damage or performance issues.

വയറിംഗ് കണക്ഷനുകൾ:

Connect the motor to a compatible Electronic Speed Controller (ESC), such as the HOBBYWING EzRun Mini28 ESC. Ensure all connections are secure and correctly polarized. Loose connections can cause intermittent power delivery or complete loss of function.

For optimal performance and to utilize features like timing advance, connect the sensor cable from the motor to the ESC, if applicable to your ESC model.

Pinion Gear Installation:

Install the appropriate pinion gear for your application. Ensure the gear mesh between the pinion and spur gear is correctly set to avoid excessive wear or binding. Never operate the motor at full throttle without a pinion gear installed, as this can cause severe damage due to extremely high RPMs without load.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The EZRUN 1626SD-3500KV motor is designed for smooth and powerful operation when paired with a suitable ESC.

പ്രാരംഭ പവർ-അപ്പ്:

After installation, perform a low-speed test to confirm all connections are correct and the motor operates smoothly. Gradually increase throttle to check for any unusual noises or vibrations.

Timing Advance (with EzRun Mini28 ESC):

When used with the HOBBYWING EzRun Mini28 ESC, the motor supports timing advance. This feature can be configured via the ESC settings to significantly increase top speeds. Refer to your EzRun Mini28 ESC manual for detailed instructions on adjusting timing advance.

പ്രകടന സവിശേഷതകൾ:

5. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ മോട്ടോറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.

വൃത്തിയാക്കൽ:

The modular detachable structure of the EZRUN 1626SD motor allows for convenient daily cleaning. Regularly remove dust, dirt, and debris from the motor's exterior and cooling fins to maintain efficient heat dissipation.

താപനില നിരീക്ഷണം:

Continuously monitor the motor's operating temperature. The motor case should not exceed 100 degrees Celsius (212 degrees Fahrenheit). Prolonged operation above this temperature can cause irreversible damage to the motor's internal magnets.

If the motor consistently runs hot, consider checking your gearing, ESC settings, or vehicle setup for potential issues causing excessive load.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your EZRUN 1626SD motor.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
മോട്ടോർ പ്രവർത്തിക്കുന്നില്ല അല്ലെങ്കിൽ ഇടയ്ക്കിടെ പ്രവർത്തിക്കുന്നുLoose wiring connections; ESC not properly configured; Damaged motor or ESC.Check all wiring for secure connections; Verify ESC settings and calibration; Inspect motor and ESC for visible damage.
Motor overheating (above 100°C / 212°F)Incorrect gearing (too high); Excessive load on the motor; Insufficient cooling; ESC timing too aggressive.Reduce pinion gear size or increase spur gear size; Reduce vehicle weight or resistance; Ensure adequate airflow to the motor; Adjust ESC timing settings.
പ്രവർത്തന സമയത്ത് നിയന്ത്രണം നഷ്ടപ്പെടുന്നുLoose power connections; Radio interference; ESC or receiver malfunction.Inspect all power and signal connections; Check radio system for interference; Test ESC and receiver functionality.
Motor makes unusual noises or vibrates excessivelyImproper gear mesh; Damaged motor bearings; Bent motor shaft; Debris inside motor.Adjust gear mesh; Inspect bearings for wear and replace if necessary; Check motor shaft for straightness; Clean motor interior.

7 സ്പെസിഫിക്കേഷനുകൾ

സ്പെസിഫിക്കേഷൻവിശദാംശങ്ങൾ
മോഡലിൻ്റെ പേര്EZRUN 1626 Sensored Motor
കെവി റേറ്റിംഗ്3500കെ.വി
ധ്രുവങ്ങൾ2-പോൾ
ലിപ്പോ സെല്ലുകൾ2S LiPo
ഇനത്തിൻ്റെ ഭാരം2.46 ഔൺസ് (ഏകദേശം 18 ഗ്രാം)
ഉൽപ്പന്ന അളവുകൾ3.6 x 2.7 x 1.25 ഇഞ്ച്
മെറ്റീരിയൽഅലോയ് സ്റ്റീൽ
നിർമ്മാതാവ്ഹോബിവിംഗ് സാങ്കേതികവിദ്യ
ഇന മോഡൽ നമ്പറുകൾ30402653 / 30402654 / 30402655
യു.പി.സി088718506243

8. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please contact HOBBYWING North America directly or visit their official webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Official HOBBYWING Webസൈറ്റ്: www.hobbywing.com

അനുബന്ധ രേഖകൾ - EZRUN 1626SD-3500KV

പ്രീview HOBBYWING EZRUN MAX8 V3 Brushless ESC User Manual
Comprehensive user manual for the HOBBYWING EZRUN MAX8 V3 Brushless Electronic Speed Controller, covering features, specifications, connections, setup, programming, and troubleshooting for RC vehicles.
പ്രീview ഹോബിവിംഗ് എസ്രൺ 5690SL G2 / 56118SL G2 സെൻസർലെസ്സ് ബ്രഷ്ലെസ്സ് മോട്ടോർ യൂസർ മാനുവൽ
HOBBYWING EZRUN 5690SL G2, 56118SL G2 സെൻസർലെസ് ബ്രഷ്‌ലെസ് മോട്ടോറുകൾക്കായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ. സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, ഇൻസ്റ്റാളേഷൻ, ഗിയറിംഗ്, അസംബ്ലി, പാർട്‌സ് ലിസ്റ്റ് എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview Hobbywing EZRUN Series Splash-Proof Brushless Speed Controller User Manual
User manual for the Hobbywing EZRUN Series Splash-Proof Brushless Speed Controller. Covers features, specifications, setup, programming, protection functions, troubleshooting, and optional accessories for RC vehicles.
പ്രീview ഹോബിവിംഗ് EZRUN G2 സീരീസ് സെൻസർഡ് ബ്രഷ്‌ലെസ് മോട്ടോർ യൂസർ മാനുവൽ
4990SD G2, 5690SD G2, 56118SD G2 എന്നീ മോഡലുകൾ ഉൾപ്പെടെ, ഹോബിവിംഗ് EZRUN G2 സീരീസ് സെൻസേർഡ് ബ്രഷ്‌ലെസ് മോട്ടോറുകൾക്കായുള്ള ഉപയോക്തൃ മാനുവൽ. മുന്നറിയിപ്പുകൾ, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, ഇൻസ്റ്റാളേഷൻ, ഗിയറിംഗ്, അസംബ്ലി/ഡിസ്അസംബ്ലിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview HOBBYWING EZRUN MAX5/MAX6 User Manual: Setup and Operation Guide
Comprehensive user manual for the HOBBYWING EZRUN MAX5 and MAX6 electronic speed controllers. Learn about features, specifications, connections, setup, programming, and troubleshooting for your RC vehicle's ESC.
പ്രീview ഹോബിവിംഗ് EZRUN MAX8 V3 150A ബ്രഷ്‌ലെസ് ESC ഉപയോക്തൃ മാനുവൽ
ഹോബിവിംഗ് EZRUN MAX8 V3 150A ബ്രഷ്‌ലെസ് ESC-യുടെ സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, 1/8-ാം സ്കെയിൽ RC വാഹനങ്ങൾക്കുള്ള ആമുഖം, മുന്നറിയിപ്പുകൾ, സവിശേഷതകൾ, സ്പെസിഫിക്കേഷനുകൾ, കണക്ഷനുകൾ, സജ്ജീകരണം, പാരാമീറ്റർ ക്രമീകരണങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.