1. ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP MU2007 Gas Spring Monitor Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and safe use. Retain this manual for future reference.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഭാരം ശേഷി: Do not exceed the maximum weight capacity of 17.6 lbs (8 kg). Exceeding this limit may result in serious injury or product damage.
- സ്ക്രീൻ വലിപ്പം: 17 മുതൽ 32 ഇഞ്ച് വരെ നീളമുള്ള മോണിറ്ററുകൾക്കായി ഈ മൗണ്ട് രൂപകൽപ്പന ചെയ്തിരിക്കുന്നു.
- ചുമർ തരം: This mount is designed for installation on wood studs, concrete walls, or brick walls. ഡ്രൈവാളിൽ ഒറ്റയ്ക്ക് മൌണ്ട് ചെയ്യരുത്. Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- VESA അനുയോജ്യത: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm. If your monitor has a different VESA pattern, a VESA adapter (not included) may be required.
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: ഇൻസ്റ്റാളേഷൻ പ്രക്രിയയെക്കുറിച്ചോ നിങ്ങളുടെ മതിലിന്റെ അനുയോജ്യതയെക്കുറിച്ചോ നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്രൊഫഷണലിനെ സമീപിക്കുക.
- ചലിക്കുന്ന ഭാഗങ്ങൾ: The gas spring arm contains moving parts. Exercise caution during adjustment to avoid pinching or injury.
3. പാക്കേജ് ഉള്ളടക്കം
Please verify that all components are present and undamaged before beginning installation. Refer to the included hardware bag for specific part identification.
ചിത്രം: പൊട്ടിത്തെറിച്ചു view of the monitor mount components, including the gas spring arm, wall plate, VESA plate, and various covers and fasteners.
4 സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ | MU2007 |
| ബ്രാൻഡ് | മൗണ്ട്അപ്പ് |
| സ്ക്രീൻ വലിപ്പം അനുയോജ്യത | 17 - 32 ഇഞ്ച് |
| ഭാരം ശേഷി | 4.4 - 17.6 പൗണ്ട് (2 - 8 കി.ഗ്രാം) |
| VESA അനുയോജ്യത | 75x75mm, 100x100mm |
| ചലന തരം | ടിൽറ്റ്, റൊട്ടേറ്റ്, സ്വിവൽ, ഉയരം ക്രമീകരിക്കൽ, പൂർണ്ണ ചലനം |
| ടിൽറ്റ് ആംഗിൾ | +90° / -45° |
| ഭ്രമണം | 360° (Landscape/Portrait) |
| സ്വിവൽ | 180° at wall plate, 270° at arm joint |
| ഉയരം ക്രമീകരിക്കൽ | 10.6 ഇഞ്ച് |
| Max Extension from Wall | 21 ഇഞ്ച് |
| Min Retraction to Wall | 3 ഇഞ്ച് |
| മെറ്റീരിയൽ | അലുമിനിയം, ലോഹം |
| നിറം | കറുപ്പ് |
5. അനുയോജ്യതാ പരിശോധന
Before installation, confirm your monitor and wall meet the following criteria:
- മോണിറ്റർ വലുപ്പം: Your monitor screen size should be between 17 and 32 inches.
- ഭാരം നിരീക്ഷിക്കുക: Your monitor must weigh between 4.4 lbs (2 kg) and 17.6 lbs (8 kg).
- VESA പാറ്റേൺ: Check the back of your monitor for a 75x75mm or 100x100mm square hole pattern.
- ചുമർ തരം: The mount must be installed on a solid wood stud, concrete wall, or brick wall. Drywall alone is not sufficient.
ചിത്രം: Visual guide for checking monitor size (17"-32"), load capacity (4.4-17.6 lbs), and VESA pattern (75x75mm/100x100mm).
ചിത്രം: Illustration of compatible wall types: wood stud, concrete wall, and brick wall. A warning indicates not to use anchors on drywall or wood, implying direct mounting to studs or using appropriate anchors for masonry.
6. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps carefully for a secure installation.
6.1 Attaching the VESA Plate to Your Monitor
- Carefully place your monitor face down on a soft, clean surface to prevent scratches.
- Align the VESA plate with the mounting holes on the back of your monitor.
- Secure the VESA plate using the appropriate screws and washers provided in the hardware kit. Do not overtighten.
ചിത്രം: The VESA mounting plate being secured to the back of a monitor with screws, indicating the initial step of preparing the monitor for attachment to the arm.
6.2 വാൾ പ്ലേറ്റ് മൌണ്ട് ചെയ്യൽ
പ്രധാനപ്പെട്ടത്: Use a stud finder to locate a wood stud, or ensure you have the correct masonry anchors for concrete/brick walls. A built-in level on the wall plate assists with alignment.
- Determine the desired height and position for your monitor.
- Hold the wall plate against the wall at the chosen location. Use the integrated bubble level to ensure it is perfectly horizontal.
- വാൾ പ്ലേറ്റിലെ ദ്വാരങ്ങളിലൂടെ ഡ്രില്ലിംഗ് പോയിന്റുകൾ അടയാളപ്പെടുത്തുക.
- Drill pilot holes according to the instructions for your specific wall type (wood stud, concrete, or brick).
- Attach the wall plate securely to the wall using the provided lag bolts for wood studs or appropriate anchors and bolts for masonry.
ചിത്രം: ഒരു ക്ലോസപ്പ് view of the wall mounting plate, highlighting the integrated bubble level for accurate horizontal alignment during installation.
6.3 Attaching the Monitor Arm to the Wall Plate
- Slide the monitor arm assembly onto the wall plate.
- Secure the arm to the wall plate using the designated fasteners.
6.4 Attaching the Monitor to the Arm
- With assistance, carefully lift the monitor (with the VESA plate attached) and slide it onto the VESA head of the arm.
- Secure the monitor to the arm using the thumb screw or other locking mechanism.
7. പ്രവർത്തന നിർദ്ദേശങ്ങൾ (ക്രമീകരണങ്ങൾ)
The MOUNTUP MU2007 offers a full range of motion for optimal viewആശ്വാസം.
7.1 Gas Spring Adjustment (Monitor Weight)
The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement and stable positioning. If the monitor rises too easily or drops, adjust the tension.
- Monitor Raises Up (too light): Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- Monitor Drops Down (too heavy): Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
കുറിപ്പ്: When adjusting gas spring tension, hold the arm in a horizontal position. The number of turns depends on the display's weight; it may take up to 17 turns to find the correct tension.
7.2 Tilt Angle Adjustment
Adjust the monitor's vertical angle for optimal viewing.
- Loosen the tilting bolt (turn to "-" direction).
- Adjust the monitor to your desired angle (+90° / -45°).
- Retighten the tilting bolt (turn to "+" direction) to secure the position.
ചിത്രം: Detailed instructions for adjusting the gas spring tension (clockwise for lighter monitors, counter-clockwise for heavier monitors) and the tilt angle (loosen, adjust, retighten bolt).
7.3 Rotation (Landscape/Portrait)
The monitor can be rotated 360° to switch between landscape and portrait orientations.
ചിത്രം: A monitor shown rotating 360 degrees, illustrating the ability to switch between landscape and portrait orientations.
7.4 Swivel and Extension
The arm allows for 180° swivel at the wall plate and 270° at the arm joint, providing flexible positioning. It can extend up to 21 inches from the wall and retract to a minimum of 3 inches when not in use, maximizing desktop space.
ചിത്രം: A monitor arm swiveling and folding towards the wall, demonstrating how it can control desktop space by retracting to a minimum of 3 inches and extending up to 21 inches.
7.5 ഉയരം ക്രമീകരിക്കൽ
The gas spring mechanism allows for a smooth 10.6-inch vertical height adjustment, enabling ergonomic positioning for both seated and standing work.
ചിത്രം: ഒരു സുതാര്യമായ view of the monitor arm highlighting the internal gas spring and demonstrating a 10.6-inch height adjustment range for smooth movement.
7.6 കേബിൾ മാനേജ്മെന്റ്
Route your cables through the integrated cable management channels on the arm to maintain a clean and organized workspace.
ചിത്രം: A monitor arm with blue cables neatly routed along its underside, illustrating the integrated cable management feature designed to keep the workspace tidy.
8. പരിപാലനം
- വൃത്തിയാക്കൽ: മൗണ്ട് ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് തുടയ്ക്കുക.amp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
- ആനുകാലിക പരിശോധനകൾ: Periodically check all screws and bolts to ensure they remain tight and secure. Re-tighten if necessary.
- ഗ്യാസ് സ്പ്രിംഗ്: The gas spring is designed for long-term use and generally requires no maintenance. If movement becomes stiff or loose, refer to the gas spring adjustment section.
9. പ്രശ്നപരിഹാരം
- Monitor does not stay in position (drifts up or down): This indicates incorrect gas spring tension. Refer to Section 7.1 "Gas Spring Adjustment" and adjust the tension screw until the monitor holds its position smoothly. Remember to hold the arm horizontally during adjustment.
- Monitor is difficult to move: The gas spring tension may be too high for your monitor's weight, or the pivot points might be too tight. Loosen the gas spring tension slightly (turn clockwise) or check for any overtightened bolts at the arm joints.
- Monitor wobbles: Ensure all mounting bolts (wall plate, arm to wall plate, VESA plate to monitor, and monitor to arm) are securely tightened. Check that the wall mount is firmly attached to a suitable wall structure.
- Monitor cannot tilt: Ensure the tilt angle adjustment bolt (refer to Section 7.2) is sufficiently loosened before attempting to tilt the monitor.
10. വാറൻ്റിയും പിന്തുണയും
This MOUNTUP product is backed by a 3-year support period. If you encounter any issues during installation or use, or have any questions, please contact MOUNTUP customer service for assistance. Refer to your purchase documentation for contact details.
