Cecotec FreeGo Wash Electric Mop 40W User Manual

1. ആമുഖം

Thank you for choosing the Cecotec FreeGo Wash Electric Mop. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• വൈദ്യുതി വിതരണം വോളിയം ഉറപ്പാക്കുകtage ഉപകരണത്തിന്റെ ആവശ്യകതകളുമായി പൊരുത്തപ്പെടുന്നു.
• പ്രധാന യൂണിറ്റ് വെള്ളത്തിലോ മറ്റ് ദ്രാവകങ്ങളിലോ മുക്കരുത്.
• കുട്ടികളിൽ നിന്നും വളർത്തുമൃഗങ്ങളിൽ നിന്നും ഉപകരണം അകറ്റി നിർത്തുക.
• Use only the original charger and accessories provided by Cecotec.
• Do not use the device to clean flammable or combustible liquids.
• വൃത്തിയാക്കുന്നതിനോ അറ്റകുറ്റപ്പണി നടത്തുന്നതിനോ മുമ്പായി എപ്പോഴും ഉപകരണം അൺപ്ലഗ് ചെയ്യുക.
• Avoid using foaming detergents, as they can damage the device.

2. ഉൽപ്പന്ന ഘടകങ്ങൾ

Familiarize yourself with the parts of your Cecotec FreeGo Wash Electric Mop:

• Main Unit (Handle, Motor Housing, Battery)
• Jalisco Wet Roller
• Clean Water Tank (420 ml)
• Dirty Water Tank (150 ml)
• Self-Cleaning Base
• പവർ അഡാപ്റ്റർ/ചാർജർ

Figure 2.1: The Cecotec FreeGo Wash Electric Mop, shown with its self-cleaning base and a close-up of the Jalisco wet roller, highlighting its design for efficient floor cleaning.

3. സജ്ജീകരണം

3.1 അൺപാക്കിംഗും അസംബ്ലിയും

1. പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
2. Attach the handle to the main unit until it clicks into place.
3. Ensure the Jalisco wet roller is correctly installed in the mop head.

3.2 പ്രാരംഭ ചാർജിംഗ്

Before first use, fully charge the electric mop.

1. Place the mop on its self-cleaning base.
2. Connect the power adapter to the charging port on the base and then to a power outlet.
3. The charging indicator will illuminate. Allow approximately 3-4 hours for a full charge.
4. A full charge provides up to 30 minutes of operating autonomy.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 ശുദ്ധജല ടാങ്ക് നിറയ്ക്കൽ

1. പ്രധാന യൂണിറ്റിൽ നിന്ന് ശുദ്ധജല ടാങ്ക് നീക്കം ചെയ്യുക.
2. Open the tank cap and fill it with clean water. You may add a small amount of non-foaming floor cleaner suitable for electric mops. Do not use foaming detergents.
3. Close the cap securely and reinsert the tank into the mop until it clicks.

Figure 4.1: A user demonstrating the removal of one of the water tanks from the mop for refilling or emptying.

4.2 Starting the Mop and Cleaning Process

1. Press the power button to turn on the mop.
2. The Jalisco wet roller will begin to rotate, and the automatic spray function will dispense water onto the floor.
3. Guide the mop across the floor surface to clean. The 40W power and wet roller effectively tackle stubborn dirt.
4. The mop is designed for deep cleaning and can cover large areas thanks to its battery autonomy.

Figure 4.2: A user demonstrating the ease of use of the Cecotec FreeGo Wash Electric Mop while cleaning a floor.

ചിത്രം 4.3: വിശദമായ ഒരു view of the mop's Jalisco wet roller in action, effectively cleaning a liquid spill on a hard floor surface.

4.3 Parking Position

The mop features a convenient parking position, allowing it to stand upright independently when you need to pause during cleaning.

Figure 4.4: The electric mop shown in its convenient self-standing parking position, allowing for temporary pauses during cleaning.

5. പരിപാലനം

5.1 വൃത്തികെട്ട വാട്ടർ ടാങ്ക് കാലിയാക്കൽ

The mop has an auto-stop function that activates when the dirty water tank is full. Empty the tank regularly to ensure optimal performance.

1. Turn off the mop and remove the dirty water tank.
2. Open the tank and dispose of the dirty water.
3. Rinse the tank with clean water and dry it thoroughly.
4. Reinsert the tank into the mop.

5.2 സ്വയം വൃത്തിയാക്കൽ പ്രവർത്തനം

Utilize the self-cleaning base for convenient roller maintenance.

1. After cleaning, place the mop on its self-cleaning base.
2. Ensure there is some clean water in the clean water tank.
3. Activate the self-cleaning function (refer to your device's specific button for this function). The mop will automatically clean the roller.

Figure 5.1: The electric mop positioned on its dedicated base, ready for the self-cleaning cycle.

5.3 Cleaning the Roller and Filter

For thorough cleaning, the roller can be removed and washed manually. The filter should also be cleaned regularly.

1. Turn off the mop and remove the roller from the mop head.
2. Rinse the roller under running water until clean. Allow it to air dry completely before reinstallation.
3. Remove the filter (cartridge type) and rinse it under water. Ensure it is completely dry before placing it back.

6. പ്രശ്‌നപരിഹാരം

If you encounter any issues with your Cecotec FreeGo Wash Electric Mop, please refer to the following common problems and solutions:

ഈ പരിഹാരങ്ങൾ പരീക്ഷിച്ചതിന് ശേഷവും പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, ദയവായി സെകോടെക് ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

Your Cecotec FreeGo Wash Electric Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, spare parts, or any other inquiries, please visit the official Cecotec website or contact their customer service department. Contact information can typically be found on the product packaging or the Cecotec brand store.