Lexmark MX931 81.5K Imaging Unit User Manual

1. ആമുഖം

This manual provides essential instructions for the installation, operation, and maintenance of your Lexmark MX931 81.5K Imaging Unit. Adhering to these guidelines will ensure optimal performance and longevity of the product. This imaging unit is designed specifically for use with Lexmark MX931 series printers.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always power off and unplug the printer before installing or removing the imaging unit.
• Avoid touching the photoconductor drum on the imaging unit, as fingerprints can cause print quality issues.
• Keep the imaging unit away from direct sunlight or strong artificial light to prevent damage to the photoconductor drum.
• Handle the unit carefully to prevent drops or impacts.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ അടങ്ങിയിട്ടുണ്ടെന്ന് പരിശോധിക്കുക:

• One (1) Genuine Lexmark MX931 81.5K Imaging Unit (Model 63D0Z00)

This image displays the Lexmark MX931 81.5K Imaging Unit alongside its green and white retail box, featuring the Lexmark logo. The unit itself is black and cylindrical, designed for installation into compatible Lexmark printers.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install the imaging unit into your Lexmark MX931 printer:

1. പ്രിന്റർ പവർ ഓഫ് ചെയ്യുക: Ensure the printer is turned off and unplugged from the power outlet.
2. മുൻ കവർ തുറക്കുക: Open the front access cover of your Lexmark MX931 printer.
3. Remove Used Imaging Unit: Carefully grasp the handle of the used imaging unit and pull it straight out of the printer. Place it in a protective bag for recycling.
4. Unpack New Imaging Unit: Remove the new Lexmark MX931 81.5K Imaging Unit from its packaging. Avoid touching the green photoconductor drum.
5. സംരക്ഷണ വസ്തുക്കൾ നീക്കം ചെയ്യുക: Remove any protective tapes or covers from the new imaging unit as indicated in the unit's quick start guide.
6. Insert New Imaging Unit: Align the new imaging unit with the guides inside the printer and gently push it in until it clicks securely into place.
7. മുൻ കവർ അടയ്ക്കുക: Close the front access cover of the printer.
8. പവർ ഓൺ പ്രിന്റർ: Plug the printer back into the power outlet and turn it on. The printer will perform an initialization sequence.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the imaging unit is installed, the printer is ready for operation. The imaging unit is a critical component that works in conjunction with the toner cartridge to produce prints. No direct user operation is required for the imaging unit itself beyond its installation.

• Ensure a compatible toner cartridge is also installed.
• Monitor the printer's control panel for any messages related to the imaging unit or print quality.
• The printer will automatically track the imaging unit's life and notify you when replacement is needed.

6. പരിപാലനം

Proper maintenance helps extend the life of your imaging unit and ensures consistent print quality.

• സംഭരണം: Store new imaging units in their original, unopened packaging in a cool, dry place away from direct light.
• വൃത്തിയാക്കൽ: Do not attempt to clean the photoconductor drum with abrasive materials or liquids. If print quality issues arise, consult the troubleshooting section or your printer's main manual.
• മാറ്റിസ്ഥാപിക്കൽ: Replace the imaging unit when the printer indicates it is near or at the end of its service life. The estimated page yield for this unit is up to 37,000 pages (black).

7. പ്രശ്‌നപരിഹാരം

If you encounter issues after installing the imaging unit, consider the following:

• Print Quality Issues (Streaks, Spots):
  • Ensure the imaging unit was not exposed to bright light for an extended period during installation.
  • Verify that the photoconductor drum was not touched during installation.
  • Check if the toner cartridge is also new or has sufficient toner.
• "Imaging Unit Error" Message:
  • Confirm the imaging unit is fully seated and clicked into place.
  • Power cycle the printer (turn off, unplug, wait 30 seconds, plug in, turn on).
  • Ensure you are using a genuine Lexmark imaging unit compatible with your MX931 printer.
• Low Page Yield:
  • The stated page yield of 37,000 pages is an estimate based on standard coverage. Actual yield may vary significantly based on print content, printer settings, and other factors.

For further assistance, refer to your printer's comprehensive user manual or contact Lexmark support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

As a genuine Lexmark product, this imaging unit is covered by Lexmark's standard warranty policy. For detailed warranty information, technical support, or service inquiries, please visit the official Lexmark support webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.

നിങ്ങൾക്ക് സാധാരണയായി പിന്തുണാ ഉറവിടങ്ങൾ ഇവിടെ കണ്ടെത്താനാകും: Lexmark Support